(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
KWI Series (Pitch between terminals 7 mm)
- Volume Discount
[Specifications]·Low-cost, high-performance MIL connector type · General-purpose specification that pursues cost advantages while maintaining the basic functions of the MWI-series terminal block.
- Connection in Boards
- Space-saving
- PLC
- 125 V
● General purpose specifications designed for cost benefit while keeping the same basic functionality of the MWI-series terminal block.
1. The upper level crimp terminal can be connected to the lower level without causing obstruction (utility model patent).
2. The 5-spaced bulkheads and △ mark support number recognition (utility model patent).
· Check the specifications of the connector array of each device on equipment side before ordering.
Part Number
Configured Part Number is shown.
KWI-MIL20-HTB20
Specification Table
| Model | Number Of Cores |
| KWI-MIL20-HTB20 | 20 |
| KWI-MIL34-HTB34 | 34 |
| KWI-MIL40-HTB40 | 40 |
Overview of Specifications
| Model | Number Of Cores | Mounting connector (male) | Recommended harness |
| KWI-MIL20-HTB20 | 20 | 20-Core MIL Socket Connector | HIFS Series |
| KWI-MIL34-HTB34 | 34 | 34-Core MIL Socket Connector | |
| KWI-MIL40-HTB40 | 40 | 40-Core MIL Socket Connector |
Recommended crimp terminal
| Manufacturer | Model | L Dimension | |
| Y Type | Daido Solderless Terminal Manufacturing | F1.25-M3 | 5.6 mm |
| F1.25-L3.5 | 5.9 mm | ||
| F1.25-V3.5 | 5.7 mm | ||
| F2-S3.5 | |||
| J.S.T Mfg. | 1.25-C3.5A | 5.6 mm | |
| Round | Daido Solderless Terminal Manufacturing | 1.25-3 | 5.5 mm |
| 1.25-M3.5 |
| Rated Voltage | 125 V AC/DC |
| Rated Current | 1 A |
| Withstand Voltage | 500 V AC for 1 min. |
| Vibration-Resistant | Double amplitude 1.5 mm / 1 hour (10 to 55 Hz/min) |
| Impact-Resistant | 10 G Equivalent |
| Insulation Resistance | 100 MΩ or more (500 V DC megger) |
| Ambient Temperature (Operation) | −20 to +80°C |
| Ambient Temperature (Storage) | −20 to +80°C |
| Relative Temperature | 45 to 85% |
| Pitch Between Terminals | 7 mm |
| Terminal Block Screw | M3x6 Self-up |
| Tightening Torque | 0.6 to 0.9 N·m |
| Conforming Wire | 1.25 mm2 Max |
| Terminal Block | PBT HB Materials |
| Terminal screw | Iron, zinc plating |
| Case | ABS |
Basic Information
| Connector | MIL Connector | Number of connector cores(Pole) | 20 | Mounting Method | DIN rail/Direct attachment |
|---|---|---|---|---|---|
| Pitch Between Terminals(mm) | 7 | Supported equipment | PLC | Dimension width(mm) | 80 |
| Terminal Block Screw | M3 | Dimension vertical(mm) | 42 | Dimension depth(mm) | 42.5 |
| Supported crimp terminal | Y Terminal / Round Terminal | Number of terminal block electrodes(Pole) | 20 | Connector Polarity (Mounted Connector) | Female |
| Terminal block screw type | Self-Up |
Please check the type/dimensions/specifications of the part KWI-MIL20-HTB20 in the KWI Series (Pitch between terminals 7 mm) series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- PLC Connector Terminal Block (for OMRON PLC, Input)
- RJ-45 Connector Terminal Block
- MWI series (7mm pitch between terminals), terminal block screw type: Self-up
- Interface Terminal Block, Slim Type Terminal Block, 7 mm Pitch
- Terminal Block, PCN7 Series
- PX7DW Series (terminal pitch: 7.62mm)
- PX7DS Series FCN Connector Terminal Block (Horizontal Insert/Terminal Pitch: 7.62mm)
- FANUC Operation Board I/O Connector Terminal Block for FANUC Control
Customers Who Viewed This Item Also Viewed
-
MWS Series (Spring-Loaded), Compatible Crimp Terminals Y terminal/Round terminalMISUMI
Standard Price : MYR 95.44-
Days to Ship : 1 Day(s) or more
-
MWI Series (Terminal Pitch 7 mm), Compatible Crimp Terminals: SpadeMISUMI
Standard Price : MYR 142.43-
Days to Ship : 1 Day(s) or more
-
Connector Terminal Block Conversion Unit (Slim Type) XW2DOMRON
Standard Price : MYR 256.08-
Days to Ship : 5 Day(s) or more
-
MWI Series (Pitch between terminals 8.5 mm)MISUMI
Standard Price : MYR 664.54-
Days to Ship : 4 Day(s) or more
-
PLC Connector Terminal Block (for OMRON PLC, Input)MISUMI
Standard Price : MYR 145.37
Days to Ship : 4 Day(s) or more
-
Connector Terminal Block Conversion Unit XW2R (For General Purpose Use)OMRON
Standard Price : MYR 136.56-
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy