Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Motor Driven Roller Diameter 60 mm

Click this image to zoom it.

Move the mouse over the image to zoom

Check FAQ of this product (3 items)

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

Drawing/Specifications
Part Numbers

Product Overview

MISUMI economy electric roller is a new generation of electric roller with an integrated design that includes a DC brushless motor, gearbox, and electronic control system.
Feature 1: High efficiency and energy saving. The integrated design uses a high-quality brushless motor and a premium gearbox, resulting in significantly higher efficiency than standard external motor configurations.
Feature 2: Flexible application. Covers standard straight-through type, Poly-V belt drive, and double sprocket drive. The motor output shaft has also been optimally designed. With 9 gear reduction ratios and roller surface lengths selectable in 1 mm increments from 350 to 1600 mm, it can meet a wide range of application scenarios.
Feature 3: Low noise. Most competing products in the industry are below 55 dB, while the electric roller can achieve noise levels below 50 dB.
Feature 4: Universal design. Shares the same platform as the 50 mm diameter roller and can use the same drive control card.

Dimensional Drawing

■60 mm Roller Diameter Dimension Drawing Z1 (Plastic, straight-through type)

P7 (carbon steel, chrome plated, 11PJ PolyVee belt type)

L3 (carbon steel, blackened, 08B14T double sprocket)

Specification Table

Place your order after selecting the model and parameters according to selection steps to

Type		Rated Voltage	-	Roller Diameter	-	Effective Roller Length	-	Reduction Ratio	-	Power Drive Configuration	-	Roller Surface Characteristics	-	Driver Type	-	Cable End Mounting Method	-	Non-Cable End Mounting Method
EA-MORR		24	-	60	-	500	-	S5	-	C2	-	A0	-	P7	-	T2	-	K3

■ Specification Table

Type	DC Rated Voltage (V)	Roller Diameter (mm)	Effective Roller Length RL (specify in 1 mm units)	Reduction Ratio	Power Drive Configuration	Roller Surface Characteristics	Driver Type	Cable End Mounting Method	Non-Cable End Mounting Method
EA-MORR (Gearbox material: Fe-based powder metallurgy IP54)	24 48	60	350 to 1600	S3 (Reduction ratio 13)	C1 (35W magnetic encoder) C2 (50W magnetic encoder) C3 (80W magnetic encoder) D1 (35W hall sensor) D2 (50W hall sensor) D3 (80W hall sensor) * D4 (120W hall sensor)	A0 (Carbon steel, galvanized) B0 (Equivalent to SUS304)	* Z1 (Straight-through type plastic material) P7 (Carbon steel, chrome plated, 11PJ Poly-V belt type) L3 (Carbon steel, blackened, 08B14T double sprocket)	T1 (With M12*1 threaded HEX) T2 (HEX11 without thread) T3 (Stainless steel, double D-shape)	K3 (Stainless steel, M8 internal thread) K4 (Stainless steel, M10 internal thread) K6 (Stainless steel, double D-shape)
				S4 (Reduction ratio 18)
				S5 (Reduction ratio 25)
				S6 (Reduction ratio 30)
				S7 (Reduction ratio 42)
				S8 (Reduction ratio 65)
				S9 (Reduction ratio 78)
				S10 (Reduction ratio 90)
				S11 (Reduction ratio 108)

When the power drive configuration is D4, only 48 V DC is available as the rated voltage.
Only transmission type Z1 supports the combination of output-side mounting type T3 and non-output-side mounting type K6.
The selection of the transmission ratio mainly depends on the working load. Please refer to the drive load in the table below for reference.

■ Performance parameter table

Power drive configuration	DC rated voltage (V)	Reduction ratio	Speed Ratio	Rated Output Speed (rpm/min)	Rated Output Linear Speed (m/min)	Rated Output Torque (N⋅m)	Starting Torque (N⋅m)	Drive Load * (μ=0.05) KG
C1 (Magnetic encoder 35W) D1 (Hall sensor 35W)	24 48	S3	13	530.77	100.20	0.64	1.60	25
		S4	18	383.33	72.00	0.89	2.23	35
		S5	25	276	52.20	1.24	3.10	50
		S6	30	230	43.20	1.49	3.73	60
		S7	42	164.29	31.20	2.07	5.18	85
		S8	65	106.48	19.80	2.95	7.38	130
		S9	78	88.46	16.80	3.55	8.88	155
		S10	90	76.67	14.40	4.10	10.25	180
		S11	108	63.89	12.00	4.95	12.38	215
C2 (Magnetic encoder 50W) D2 (Hall sensor 50W)	24 48	S3	13	530.77	100.20	0.91	2.28	40
		S4	18	383.33	72.00	1.27	3.18	50
		S5	25	276	52.20	1.76	4.40	75
		S6	30	230	43.20	2.13	5.33	90
		S7	42	164.29	31.20	2.96	7.40	125
		S8	65	106.48	19.80	4.58	11.45	185
		S9	78	88.46	16.80	5.07	12.68	225
		S10	90	76.67	14.40	5.89	14.73	260
		S11	108	63.89	12.00	7.07	17.68	310
C3 (Magnetic encoder 80W) D3 (Hall sensor 80W)	24 48	S3	13	530.77	100.20	1.55	3.88	65
		S4	18	383.33	72.00	2.10	5.24	85
		S5	25	276	52.20	2.91	7.28	120
		S6	30	230	43.20	3.49	8.73	145
		S7	42	164.29	31.20	4.89	12.22	200
		S8	65	106.48	19.80	7.35	14.71	300
		S9	78	88.46	16.80	8.85	17.70	360
		S10	90	76.67	14.40	10.21	18.00	420
		S11	108	63.89	12.00	12.26	18.00	500
D4 (Hall sensor 120W)	48	S3	13	769.23	145.20	1.55	3.88	65
		S4	18	555.56	105.00	2.10	5.25	85
		S5	25	400	75.60	2.91	7.28	120
		S6	30	333.33	63.00	3.49	8.73	145
		S7	42	238.1	45.00	4.89	12.23	200
		S8	65	154.32	28.80	7.35	14.70	300
		S9	78	128.21	24.00	8.85	17.70	360
		S10	90	111.11	21.00	10.21	20.42	420
		S11	108	92.59	17.40	12.26	24.52	500

The drive load is a reference value; the specific value needs to be calculated based on the actual application.
A corresponding driver must be selected for power drive.

■ Basic Parameters

DC Rated Voltage (V)	Rated Current (A)	Starting Current (A)	Rated Power (W)	Maximum Noise	Operating Ambient Temperature	Cable Length	Conduit Size
24	2.2	5.5	35	50 dB	-40℃ to 55℃	Magnetic encoder roller cable length: 0.5 m (with 5-pin straight-through connector) Hall sensor roller cable length: 1 m (with 9-pin header connector)	Diameter: 60 mm Wall thickness: 2 mm
	3.1	7.8	50
	4.5	11.3	80
48	1.1	2.8	35
	1.5	3.8	50
	2.3	5.8	80
	3.5	8.7	120

Alterations

Alterations	Motorized Roller Extension Cable
Code	CL	DL
Spec.	Magnetic encoder (5-pin straight-through male and female connectors on both ends)	Hall sensor (9-pin pin header male and female connectors on both ends)
	Extension cables are only available in 1-meter and 2-meter lengths.
	A number added after the code indicates the length. For example: CL5 refers to a 5-meter (2 m + 2 m + 1 m) magnetic encoder extension cable.

Alterations	Motorized Roller Accessory Shoulder Sleeve
Code	SS	Depending on the roller surface length, 1 to 5 additional shoulder sleeves can be added. Specification method (example): SS3-LA100-LB300-LC500 In the left diagram, the margin dimensions LA, LB, LC, LD, and LE represent the distance between each collar and the end cap at the cable outlet. The specified unit is 1 mm. If there are 2 shoulder sleeves: only define LA and LB If there are 3 shoulder sleeves: only define LA, LB, and LC If there are 4 shoulder sleeves: only define LA, LB, LC, and LD If there are 5 shoulder sleeves: define LA, LB, LC, LD, and LE
Spec.	POK (Black polyoxymethylene)
	D80*W100


	A number after the code indicates the quantity of shoulder sleeves.

Example of Use

Application Areas
Used for medium-sized pallet handling, with a maximum drive load of up to 600 kg, suitable for conveyor line scenarios such as white goods and truck tires.
Especially outstanding in the field of new energy vehicles.

Related Products

Economical driver specifications and types

Driver Magnetic Encoder 35W N1 One-to-One	Driver Magnetic Encoder 50W N1 One-to-One, 485 Communication	Driver Magnetic Encoder 80W N4 One-to-Four	Driver Hall Sensor 50W N1 One-to-One	Driver Hall Sensor 80W N2 One-to-Two

EA-MRD24-C1-N1-B3	EA-MRD48-C2-N1-C0	EA-MRD48-C3-N4-G0	EA-MRD24-D2-N1-B1	EA-MRD48-D3-N2-F0

Economy free roller specifications and types

Economy Free Roller, Diameter 60 mm

EA-FRJ-60-J1-500-A1-T3

: 30; 45; 60

Part Number
EA-MORR-24-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-C[1,2,3]-A0-L3-T[1,2,3]-K[3,4,6]
EA-MORR-24-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-C[1,2,3]-A0-P7-T[1,2,3]-K[3,4,6]
EA-MORR-24-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-C[1,2,3]-A0-Z1-T[1,2,3]-K[3,4,6]
EA-MORR-24-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-C[1,2,3]-B0-L3-T[1,2,3]-K[3,4,6]
EA-MORR-24-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-C[1,2,3]-B0-P7-T[1,2,3]-K[3,4,6]
EA-MORR-24-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-C[1,2,3]-B0-Z1-T[1,2,3]-K[3,4,6]
EA-MORR-24-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-D[1,2,3]-A0-L3-T[1,2,3]-K[3,4,6]
EA-MORR-24-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-D[1,2,3]-A0-P7-T[1,2,3]-K[3,4,6]
EA-MORR-24-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-D[1,2,3]-A0-Z1-T[1,2,3]-K[3,4,6]
EA-MORR-24-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-D[1,2,3]-B0-L3-T[1,2,3]-K[3,4,6]
EA-MORR-24-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-D[1,2,3]-B0-P7-T[1,2,3]-K[3,4,6]
EA-MORR-24-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-D[1,2,3]-B0-Z1-T[1,2,3]-K[3,4,6]
EA-MORR-48-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-C[1,2,3]-A0-L3-T[1,2,3]-K[3,4,6]
EA-MORR-48-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-C[1,2,3]-A0-P7-T[1,2,3]-K[3,4,6]
EA-MORR-48-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-C[1,2,3]-A0-Z1-T[1,2,3]-K[3,4,6]
EA-MORR-48-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-C[1,2,3]-B0-L3-T[1,2,3]-K[3,4,6]
EA-MORR-48-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-C[1,2,3]-B0-P7-T[1,2,3]-K[3,4,6]
EA-MORR-48-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-C[1,2,3]-B0-Z1-T[1,2,3]-K[3,4,6]
EA-MORR-48-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-D[1,2,3,4]-A0-L3-T[1,2,3]-K[3,4,6]
EA-MORR-48-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-D[1,2,3,4]-A0-P7-T[1,2,3]-K[3,4,6]
EA-MORR-48-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-D[1,2,3,4]-A0-Z1-T[1,2,3]-K[3,4,6]
EA-MORR-48-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-D[1,2,3,4]-B0-L3-T[1,2,3]-K[3,4,6]
EA-MORR-48-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-D[1,2,3,4]-B0-P7-T[1,2,3]-K[3,4,6]
EA-MORR-48-60-[350-1600/1]-S[3,4,5,6,7,8,9,10,11]-D[1,2,3,4]-B0-Z1-T[1,2,3]-K[3,4,6]

Standard Unit Price	Minimum order quantity	Days to Ship	DC Supply Voltage (V)	Power Drive Configuration	Effective Length RL (mm)	Reduction Ratio	Roller Surface Characteristics	Driver Type	Cable End Mounting Method	Non-Cable End Mounting Method
-	1 Piece(s)	14 Day(s) or more	24	C1 (35W magnetic encoder) / C2 (50W magnetic encoder) / C3 (80W magnetic encoder)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	A0 (Carbon steel galvanised)	L3 (Carbon steel blackened 08B14T double sprocket)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	24	C1 (35W magnetic encoder) / C2 (50W magnetic encoder) / C3 (80W magnetic encoder)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	A0 (Carbon steel galvanised)	P7 (Carbon steel chrome plated 11PJ Poly-V belt)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	24	C1 (35W magnetic encoder) / C2 (50W magnetic encoder) / C3 (80W magnetic encoder)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	A0 (Carbon steel galvanised)	Z1 (Straight-through plastic)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	24	C1 (35W magnetic encoder) / C2 (50W magnetic encoder) / C3 (80W magnetic encoder)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	B0 (Equivalent to SUS304)	L3 (Carbon steel blackened 08B14T double sprocket)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	24	C1 (35W magnetic encoder) / C2 (50W magnetic encoder) / C3 (80W magnetic encoder)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	B0 (Equivalent to SUS304)	P7 (Carbon steel chrome plated 11PJ Poly-V belt)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	24	C1 (35W magnetic encoder) / C2 (50W magnetic encoder) / C3 (80W magnetic encoder)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	B0 (Equivalent to SUS304)	Z1 (Straight-through plastic)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	24	D1 (35W hall sensor) / D2 (50W hall sensor) / D3 (80W hall sensor)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	A0 (Carbon steel galvanised)	L3 (Carbon steel blackened 08B14T double sprocket)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	24	D1 (35W hall sensor) / D2 (50W hall sensor) / D3 (80W hall sensor)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	A0 (Carbon steel galvanised)	P7 (Carbon steel chrome plated 11PJ Poly-V belt)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	24	D1 (35W hall sensor) / D2 (50W hall sensor) / D3 (80W hall sensor)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	A0 (Carbon steel galvanised)	Z1 (Straight-through plastic)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	24	D1 (35W hall sensor) / D2 (50W hall sensor) / D3 (80W hall sensor)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	B0 (Equivalent to SUS304)	L3 (Carbon steel blackened 08B14T double sprocket)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	24	D1 (35W hall sensor) / D2 (50W hall sensor) / D3 (80W hall sensor)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	B0 (Equivalent to SUS304)	P7 (Carbon steel chrome plated 11PJ Poly-V belt)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	24	D1 (35W hall sensor) / D2 (50W hall sensor) / D3 (80W hall sensor)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	B0 (Equivalent to SUS304)	Z1 (Straight-through plastic)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	48	C1 (35W magnetic encoder) / C2 (50W magnetic encoder) / C3 (80W magnetic encoder)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	A0 (Carbon steel galvanised)	L3 (Carbon steel blackened 08B14T double sprocket)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	48	C1 (35W magnetic encoder) / C2 (50W magnetic encoder) / C3 (80W magnetic encoder)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	A0 (Carbon steel galvanised)	P7 (Carbon steel chrome plated 11PJ Poly-V belt)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	48	C1 (35W magnetic encoder) / C2 (50W magnetic encoder) / C3 (80W magnetic encoder)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	A0 (Carbon steel galvanised)	Z1 (Straight-through plastic)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	48	C1 (35W magnetic encoder) / C2 (50W magnetic encoder) / C3 (80W magnetic encoder)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	B0 (Equivalent to SUS304)	L3 (Carbon steel blackened 08B14T double sprocket)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	48	C1 (35W magnetic encoder) / C2 (50W magnetic encoder) / C3 (80W magnetic encoder)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	B0 (Equivalent to SUS304)	P7 (Carbon steel chrome plated 11PJ Poly-V belt)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	48	C1 (35W magnetic encoder) / C2 (50W magnetic encoder) / C3 (80W magnetic encoder)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	B0 (Equivalent to SUS304)	Z1 (Straight-through plastic)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	48	D1 (35W hall sensor) / D2 (50W hall sensor) / D3 (80W hall sensor) / D4 (120W hall sensor)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	A0 (Carbon steel galvanised)	L3 (Carbon steel blackened 08B14T double sprocket)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	48	D1 (35W hall sensor) / D2 (50W hall sensor) / D3 (80W hall sensor) / D4 (120W hall sensor)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	A0 (Carbon steel galvanised)	P7 (Carbon steel chrome plated 11PJ Poly-V belt)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	48	D1 (35W hall sensor) / D2 (50W hall sensor) / D3 (80W hall sensor) / D4 (120W hall sensor)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	A0 (Carbon steel galvanised)	Z1 (Straight-through plastic)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	48	D1 (35W hall sensor) / D2 (50W hall sensor) / D3 (80W hall sensor) / D4 (120W hall sensor)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	B0 (Equivalent to SUS304)	L3 (Carbon steel blackened 08B14T double sprocket)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	48	D1 (35W hall sensor) / D2 (50W hall sensor) / D3 (80W hall sensor) / D4 (120W hall sensor)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	B0 (Equivalent to SUS304)	P7 (Carbon steel chrome plated 11PJ Poly-V belt)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)
-	1 Piece(s)	14 Day(s) or more	48	D1 (35W hall sensor) / D2 (50W hall sensor) / D3 (80W hall sensor) / D4 (120W hall sensor)	350 ～ 1600	S3 (Reduction Ratio 13) / S4 (Reduction Ratio 18) / S5 (Reduction Ratio 25) / S6 (Reduction Ratio 30) / S7 (Reduction Ratio 42) / S8 (Reduction Ratio 65) / S9 (Reduction Ratio 78) / S10 (Reduction Ratio 90) / S11 (Reduction Ratio 108)	B0 (Equivalent to SUS304)	Z1 (Straight-through plastic)	T1 (With M12*1 threaded HEX) / T2 (HEX11 without thread) / T3 (Stainless steel double D-shape)	K3 (Stainless steel M8 internal thread) / K4 (Stainless steel M10 internal thread) / K6 (Stainless steel double D-shape)

Basic Information

Roller Diamater(mm)	60	Gearbox Material	Iron-based powder metallurgy IP54

Configure

24 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

DC Supply Voltage(V)
- 24
- 48
Clear
Power Drive Configuration
C1 (35W magnetic encoder)

D1 (35W hall sensor)

C2 (50W magnetic encoder)

D2 (50W hall sensor)

C3 (80W magnetic encoder)

D3 (80W hall sensor)

D4 (120W hall sensor)
Clear
Effective Length RL(mm)
[350-1600/1mm Unit(s)]
Clear
Reduction Ratio
S3 (Reduction Ratio 13)

S4 (Reduction Ratio 18)

S5 (Reduction Ratio 25)

S6 (Reduction Ratio 30)

S7 (Reduction Ratio 42)

S8 (Reduction Ratio 65)

S9 (Reduction Ratio 78)

S10 (Reduction Ratio 90)

S11 (Reduction Ratio 108)
Clear
Roller Surface Characteristics
A0 (Carbon steel galvanised)

B0 (Equivalent to SUS304)
Clear
Driver Type
Z1 (Straight-through plastic)

L3 (Carbon steel blackened 08B14T double sprocket)

P7 (Carbon steel chrome plated 11PJ Poly-V belt)
Clear
Cable End Mounting Method
T1 (With M12*1 threaded HEX)

T2 (HEX11 without thread)

T3 (Stainless steel double D-shape)
Clear
Non-Cable End Mounting Method
K3 (Stainless steel M8 internal thread)

K4 (Stainless steel M10 internal thread)

K6 (Stainless steel double D-shape)
Clear
CAD
- 3D
Clear

Days to Ship

All

14 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: The roller gets very hot during operation and feels too hot to touch. Is this normal?: Answer: Not completely normal. Electric rollers have a built-in motor, so some temperature rise during operation is normal (usually between 40℃ and 60℃). However, if it is too hot to touch, it is usually due to overloading or the selected power being too low. In addition, if the drum starts frequently (more than 6 times per minute), the heat cannot dissipate and this can also cause overheating. It is recommended to check whether the load is within the rated range.
Question: Why does the roller make abnormal noises or squeaking sounds when rotating?: Answer: There are two common causes: first, internal gear wear or insufficient lubricant (for oil-immersed types); second, uneven mounting brackets, which cause uneven force on the drum shaft ends and friction in the internal bearings. First, check whether the mounting bolts are tightened and whether there are any obstructions or debris along the roller's operating path.
Question: Why does the roller slip during operation?: Answer: There are two common causes: first, the weight or friction coefficient of the conveyed items exceeds the load capacity; second, surface oil contamination causes slipping. Select the appropriate power based on actual operating conditions and clean the roller surface regularly.

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Motor Driven Roller Diameter 60 mm

Basic Information

Configure

Specification/Dimensions

DC Supply Voltage(V)

Power Drive Configuration

Effective Length RL(mm)

Reduction Ratio

Roller Surface Characteristics

Driver Type

Cable End Mounting Method

Non-Cable End Mounting Method

CAD

Days to Ship

Specify Alterations

Frequently asked question (FAQ)

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm