Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Driver for MISUMI Economy BLDC Motor (EA-DRVC41-200-S2-R-B)

Economy
Volume Discount

MISUMI

MiSUMi Economy

MISUMI

Driver for MISUMI Economy BLDC Motor launched as MISUMI Economy series

Part Number

Configured Part Number is shown.

EA-DRVC41-200-S2-R-B

Drawing/Specifications
Part Numbers

Product Overview

All of these product lines belong to the Brushless Driver category or the Non-inductive Driver (sensorless / Hall-free driver) category. They are designed to control brushless DC motors (BLDC) and permanent magnet synchronous motors (PMSM).

【Application】
Industrial robots, smart logistics, new energy systems, medical equipment, textile machinery, and environments with high signal interference.

【Technical Data (Manuals) 】>>Download

【Product Feature】

Feature	General Details
Protection	Overcurrent, overvoltage, undervoltage, overload, overtemperature, and short circuit protection
Communication	Supports Modbus RTU / RS485 (most commonly used)
Accuracy	Low speed error (±0.5% or fluctuation around ~1% depending on technology)
Load Capacity	Supports instantaneous overload (typically up to 2× or more for short durations)
Input/Output	Integrated multi-function DI/DO ports with configurable functions

【Detail Feature】

Driver series code	Series C10	Series C20	Series C40	Series C41
Driver name (English)	Basic I/O BLDC Driver (Analog & RS485 Expandable)	Multi-function NPN I/O BLDC Driver	NON-INDUCTIVE VARIABLE FREQUENCY DRIVE	NON-INDUCTIVE DRIVER
Device Category	C10: Brushless Motor Driver	C20: Brushless Motor Driver	C40: Non-inductive Variable Frequency Drive	C41: Non-inductive Driver
Control Method	Speed closed-loop control.	Open-loop and closed-loop modes.	Sine wave FOC vector control, sensorless/encoderless.	Sine wave FOC vector control, sensorless/encoderless.
Accuracy / Speed Fluctuation	Control accuracy: ±0.5%..	Control accuracy: ±0.5%..	Speed fluctuation: approximately 1%.	Speed fluctuation: approximately 1%.
Low-Speed Performance	Not mentioned .	Not mentioned .	Minimum speed can reach 20 rpm.	Minimum speed can reach 50 rpm.
On-load Starting	Fault detection for overload/locked rotor.	Fault detection for overload/locked rotor.	Supports on-load starting up to 150% of rated load torque.	Supports on-load starting up to 150% of rated load torque.
I/O Interface & Expansion	2 NPN digital inputs, 1 digital output. Expandable by 3 NPN inputs, 1 analog, and 1 RS485.	5 multi-function digital inputs, 2 customizable digital outputs.	Only 3 motor power lines required for connection.	Only 3 motor power lines required for connection.

[Combination Motor and Driver]

Motor Type	Gearhead Type	Series C10	Series C20	Series C40	Series C41
BLDC - High Torque Motor	Parallel & Solid Gearhead				✓
	Parallel (L Type) & Hollow Gearhead				✓
	Right Angle & Hollow Gearhead				✓
BLDC - High Efficiency Motor	Parallel & Solid Gearhead		✓	✓
	Parallel (L Type) & Hollow Gearhead		✓	✓
	Right Angle & Hollow Gearhead		✓	✓
BLDC - Standard Motor	Without Gearhead	✓	✓
	Parallel Gearhead	✓	✓
	Parallel (L Type) Gearhead	✓	✓

Specification Table

❶～ ❻ Please select the model and parameters according to the options below before placing your order.

*Motor and gearhead

		❶ Type		❷ Driver Series	-	❸ Power	-	❹ Power Supply Type	-	❺ Feature	-	❻ Optional for change chip
		EA-BLD		C20	-	120	-	L2	-	R	-	3

❶ Type	Driver Type	❷ Driver Series	❸ Power Level	❹ Power Supply Type	❺ Feature	❻ Optional for change chip	Appearance Structure
EA-BLD	Brushless driver	C10	120 : 120W 200 : 200W 400 : 400W 750 : 750W 800 : 800W	L: DC24V~48V L2: 24V H: AC220V/50HZ S2: AC220V/50Hz~60Hz	D: With display X: With extended function C: CAN communication R: 485 communication	-	-
EA-BLD		C20				3: Replace chip
EA-DRV		C10				-
		C14
		C20
		C40
		C41					A: Panel type B: Built-in type
		C13	90 : 90W				-

C10 SERIES
EA-BLDC10-200-L	EA-DRVC10-400-L	EA-DRVC10-200-S2-D

EA-DRVC10-200-L-D	EA-DRVC13-120-S2	EA-BLDC10-120-L-D


EA-BLDC10-120-L-DX	EA-BLDC10-200-H-D	EA-DRVC14-120-S2-R

C20 SERIES
EA-DRVC21-200-L-R	EA-DRVC20-200-S2-DR	EA-DRVC20-200-L-DR


C40 SERIES
ZDRV.C40-400L-R	EA-DRVC40-400-S2-BR	EA-DRVC40-750-S2-BR

C41 SERIES
EA-DRVC41-15/20/120/200-S2-A	EA-DRVC41-400-S2-R-B

General specification

Model parameters		Series C40				Series C41
		EA-DRVC40-400-L-R	EA-DRVC40-120-S2	EA-DRVC40-400-S2-BR	EA-DRVC40-750-S2-BR	EA-DRVC41-200-S2-A	EA-DRVC41-200-L-R-B	EA-DRVC41-200-S2-R-B	EA-DRVC41-400-S2-R-B
Rated input voltage		24V/48V	AC220V (±20%)			AC220V/50HZ	DC24V-DC48V	AC220V/50HZ	DC24V-DC48V
Output current	(ms) Rated current	15A (*1)	1.4A	2.8A	4.3A	2.5Arms	7.5Arms	1.2Arms	15.0Arms
	(peak) Peak current	42Ap	4Ap	8Ap	12.2Ap	8.0Ap	22.5Ap	4.0Ap	45.0Ap
Energy consumption braking		External braking resistor, braking voltage set through software				No
Overvoltage alarm voltage		DC65V Above	DC390V Above			125% Rated voltage overvoltage
Under voltage alarm voltage		DC18VBelow	DC200V Below			70%Rated voltage overvoltage
Overload time		2times overload, maximu duration of 0 seconds	2 times overload, maximum duration of 10 seconds		2 times overload, maximum duration of 15 seconds	-
Cooling method		Auxiliary heat dissipation, Free cooling	Free cooling		Forced air cooling	Free cooling, contact cooling
General function	Digital input	5-way DI	4-way DI			4-way, supporting NPN/PNP, optocoupler input, high-level DC12V~DC30V, low-level DC0V~DC5V, input impedance 3K Ω
	Digital input function	20W: Two DI and one DO, DI1 enabled, DI2 reversed, DO fault output; 400W: forward and reverse rotation, forward and reverse jog, multi speed, self parking, fault reset, electronic brake, external fault input, forward and reverse rotation limit;				Forward running, reverse running, three-wire control, forward jogging, reverse jogging, free parking, fault reset, electronic braking, external fault input, forward limit, reverse limit, multi terminal speed selection, etc
	Analog input function	Analog speed control	Analog speed control			Speed regulation, torque regulation
	Digital output	2-way DO	2-way DO			1 channel, optocoupler output, compatible with NPN/PNP support, maximum working voltage 60VDC, maximum output current 100mA
	Protection function	Overcurrent, overload, short circuit, overtemperature, undervoltage, overvoltage, etc				Undervoltage protection, overvoltage protection, overload protection, hardware overcurrent protection, software overcurrent protection, current limiting protection, over temperature protection, phase loss protection, locked rotor protection, etc
	Upper computer	Can use 485 communication to connect to computer upper computer software, set parameters, capture waveforms, and upgrade programs				Support
Bus control	Modbus/RS485	Supports a maximum baud rate of 115.2K and can communicate with the controller using the Modbus RTU protocol	Supports a maximum baud rate of 115.2K and can communicate with the controller using the Modbus RTU protocol			Supports a maximum baud rate of 115.2K and can communicate with the controller using the Modbus RTU protocol
	CAN open	No				No
Usage enviroment	Working temperature	Derating usage above 40 degrees Celsius				-20~40℃, derated for use above 40℃. For every 1℃ increase, the rated current needs to be reduced by 2.5%. The maximum operating temperature can reach 50℃
	Storage temperature	-10℃~70℃				-30 ℃~+60 ℃, with an air temperature change of less than 1℃/minute
	Protection level	IP20
	Installation method	Vertical or horizontal installation				Built-in installation		Built-in installation	-
	Height	When the working altitude is above 1000 meters and below 1000 meters, a derating of 1.5% is required for every 100 meters increase. The maximum working altitude is 4000 meters				Used below 1000 meters; For use with a derating of over 1000 meters, a derating of 1.5% is required for each 100 meter increase; Please test and confirm if the altitude is above 2000 meters
	Pressure	86kpa~106kpa				86kpa~106kpa

*1 : Without auxiliary heat dissipation, it can reach 12Arms

: 30; 45; 60

Part Number
EA-DRVC41-200-S2-R-B

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Applicable Motor Output (W)	Input Power Voltage (V)	Characteristics	Rated Input Voltage (V)
	MYR 272.96	1 Piece(s)		31 Day(s) or more	200	220V	Built-in Display Type	-

Basic Information

Type	Controller/Driver

Please check the type/dimensions/specifications of the part EA-DRVC41-200-S2-R-B in the Driver for MISUMI Economy BLDC Motor series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Rated Input Voltage(V)
- Single-phase 110
Clear
Applicable Motor Output(W)
15

40

90

120

200

400

800
Clear
Input Power Voltage(V)
24V

24V~48V

DC24V~48V

90V

200V

220V
Clear
Characteristics
- CAN & RS485 Comunication
- Display & RS485 Comunication
- RS485 Comunication
- Built-in Display Type
- CAN Comunication
- Display Type
- General-purpose Type
- Panel Type
Clear
CAD
- 3D
Clear

Days to Ship

All

31 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
EA-BLDC20-120-L2-R
EA-BLDC20-400-H-R
EA-BLDC20-400-L-R
EA-BLDC20-800-L-RC
EA-DRVC41-40-S2-A
EA-DRVC41-400-S2-R-B

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Applicable Motor Output (W)	Input Power Voltage (V)	Characteristics	Rated Input Voltage (V)
MYR 239.09	1 Piece(s)		31 Day(s) or more	120	24V	RS485 Comunication	-
MYR 402.36	1 Piece(s)		31 Day(s) or more	400	220V	RS485 Comunication	-
MYR 293.30	1 Piece(s)		31 Day(s) or more	400	24V~48V	RS485 Comunication	-
MYR 394.00	1 Piece(s)		31 Day(s) or more	800	24V~48V	CAN & RS485 Comunication	-
MYR 171.45	1 Piece(s)	Available	31 Day(s) or more	40	220V	Panel Type	-
MYR 304.09	1 Piece(s)		31 Day(s) or more	400	220V	Built-in Display Type	-

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Driver for MISUMI Economy BLDC Motor (EA-DRVC41-200-S2-R-B)

Basic Information

Configure

Specification/Dimensions

Rated Input Voltage(V)

Applicable Motor Output(W)

Input Power Voltage(V)

Characteristics

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm