(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Conveyor for carrier use, single row timing belt, head drive, pulley diameter 74.5 mm
Part Number
Configured Part Number is shown.
Product overview
Economical conveyor with a reasonable structure design, enabling localized production. Multiple types of models are available to meet customers' design requirements for different usage scenarios, providing better selection options.
E-DLFJT: Single row timing belt type for carriers, using a timing belt with installed metal dummy teeth to lock the carrier. When paired with a control system, it can achieve functions such as intermittent cyclic feeding; a secondary positioning device can also be added to meet positioning operation needs. The single row timing belt conveyor for carriers, used in conjunction with other devices to complete loading and unloading, packaging, labeling, dispensing, assembly, and other functions, has been widely applied in the 3C, electronic, and new energy industries.
E-DLFJT: Single row timing belt type for carriers, using a timing belt with installed metal dummy teeth to lock the carrier. When paired with a control system, it can achieve functions such as intermittent cyclic feeding; a secondary positioning device can also be added to meet positioning operation needs. The single row timing belt conveyor for carriers, used in conjunction with other devices to complete loading and unloading, packaging, labeling, dispensing, assembly, and other functions, has been widely applied in the 3C, electronic, and new energy industries.
Product feature
Feature 1: Uses a timing belt equipped with metal dummy teeth, which can lock the carrier/tooling fixture/fixture used to load products.
Feature 2: Maintenance and replacement of the timing belt with metal dummy teeth is convenient, and replacing customized carriers is also easy.
Feature 3: Stable operation, with minimal deviation even during long-term operation. (When following the specified transportation direction)
Feature 4: When paired with a control system, intermittent cycle feeding and other functions can be achieved; a secondary positioning device can also be added to meet positioning operation requirements.
Feature 2: Maintenance and replacement of the timing belt with metal dummy teeth is convenient, and replacing customized carriers is also easy.
Feature 3: Stable operation, with minimal deviation even during long-term operation. (When following the specified transportation direction)
Feature 4: When paired with a control system, intermittent cycle feeding and other functions can be achieved; a secondary positioning device can also be added to meet positioning operation requirements.
Specification overview
■ Material table
Dimensional drawing| Part name |  Material |  Surface treatment |
| Timing belt | Urethane | - |
| Metal dummy tooth | SUS630 | - |
| Profile | Aluminum alloy | Anodized |
| Motor cover | Aluminum alloy | Painted baked paint |
| Pulley holder | Aluminum alloy | Painted baked paint |
E-DLFJT
Motor specification: 86 stepper motor*
Uses a white urethane AT10 timing belt with 50 mm belt width, paired with a metal dummy tooth timing belt.
Due to issues with the structure strength and body deformation of the model, it is recommended that the carrier + product load and speed do not exceed MISUMI's design requirement standards.
The conveyor L length must meet the following condition: 400 mm < L = (P*N-240)/2 ≤ 3000 mm.
*Differences in power and reduction ratio only affect the dimensions of the motor and reducer. For A/A1/A2/A3 dimensions, please refer to the table below. The external dimensions of the other components remain the same.
Uses a white urethane AT10 timing belt with 50 mm belt width, paired with a metal dummy tooth timing belt.Due to issues with the structure strength and body deformation of the model, it is recommended that the carrier + product load and speed do not exceed MISUMI's design requirement standards.The conveyor L length must meet the following condition: 400 mm < L = (P*N-240)/2 ≤ 3000 mm.*Differences in power and reduction ratio only affect the dimensions of the motor and reducer. For A/A1/A2/A3 dimensions, please refer to the table below. The external dimensions of the other components remain the same.
Enlarged view of profile cross-section (left and right symmetrical)
Standard nut allocation table for profile groove: L value (center distance unit: mm)Nuts are shipped as accessories with the conveyor and are not displayed in the CAD model.
Standard nut allocation table for profile groove: L value (center distance unit: mm)
Nuts are shipped as accessories with the conveyor and are not displayed in the CAD model. | L400 to 999 | L1000 to 1499 | L1500 to 3000 | Specification | Configuration type |
| 16PCS | 24PCS | 32PCS | M6 (T shape) | Accessory |
| - | - | - | - | - |
■ A dimension detail table
| Motor model | A | Reduction ratio | A1 | A2 | A3 |
| 86CM45 stepper | L80 | 3 to 10 | L110 | L151.5 | L130 |
| 15 to 30 | L130 | L171.5 | L130 | ||
| 86CM80 stepper | L98 | 3 to 10 | L110 | L151.5 | L130 |
| 15 to 30 | L130 | L171.5 | L130 | ||
| 86CM120 stepper | L129 | 3 to 10 | L110 | L151.5 | L130 |
| 15 to 30 | L130 | L171.5 | L130 | ||
| 400W servo | L90.1 | 3 to 10 | L77 | L111.5 | L101.5 |
| 15 to 30 | L95 | L129 | L101.5 | ||
| 750W servo | L95.7 | 3 to 10 | L110 | L151.5 | L130 |
| 15 to 30 | L130 | L171.5 | L130 |
Vehicle appearance design reference:
Vehicle length X: X = B
Vehicle width Y: Y ≤ P-20; Y ≤ 100
Vehicle thickness T: 5 ≤ T ≤ 20
Vehicle length X: X = B
Vehicle width Y: Y ≤ P-20; Y ≤ 100
Vehicle thickness T: 5 ≤ T ≤ 20
Specification table
Please follow the selection procedure 
to 
, select the type and parameters, and then proceed with ordering.
■ Specification table
When selecting without motor and without gear head, the motor installation hole pitch will vary depending on the motor output power.
If you need to use your own motor, driver, and gear head, you can choose the version without motor, without driver, and without gear head.
When selecting without motor and without gear head, the main unit will be delivered as parts. Please assemble by the customer according to the assembly procedure instruction manual included in the same package.
■ Transmission Capacity Reference Table
to 
, select the type and parameters, and then proceed with ordering. | Type · Motor torque/power selection | - | Motor drive reducer selection | - |  B selection | - |  P (workstation pitch) | - | N (number of workstations) | ||||
 Motor selection | - |  Drive method | - |  Planetary reduction ratio | |||||||||
| When the reducer is not driven by a motor | E-DLFJT45 E-DLFJT45 | - - | YM NM | - - | MC ND | - - | 25 NH | - - | B50 B50 | - - | P60 P60 | - - | N18 N18 |
■ Specification table
| Type | Type | Machine characteristics |
| E-DLFJT | Abrasion resistant groove strip guiding type | Single-row narrow-width toothed belt, suitable for conveyance of carrier/tooling fixture/fixture/fixture type products, supports pitch-based positioning conveyance. |
| Type · Motor torque/power selection | Motor drive reducer selection | B selection | P (workstation pitch) <specified unit 10 mm> | N (number of workstations) <specified unit 1> | L <pulley center distance mm> | Belt specification | Motor brand | ||||||||||
| Motor selection | Drive method | Planetary reduction ratio | |||||||||||||||
| E-DLFJT45 (Torque 4.5 N⋅m 86 stepper motor type) E-DLFJT80 (Torque 8.0 N⋅m 86 stepper motor type) E-DLFJT120 (Torque 12.0 N⋅m 86 stepper motor type) E-DLFJT400 (400W servo motor type) E-DLFJT750 (750W servo motor type) | YM (with motor) | MC(pulse universal type) IO(IO control type): Not applicable for servo EC(bus: EtherCAT) RS(RS485 communication) | NH(No planetary reduction ratio)
(3 to 10 reduction ratio single stage) (15 to 30 reduction ratio double stage) | B50 | P50 to 400 | N4 to 50 | 400<L=(P*N-240)/2 ≤ 3000<l=(p*n-240) 2=""></l=(p*n-240)> | White PU AT10 belt width 50 With metal dummy tooth timing belt | Leadshine | ||||||||
| NM (without motor) | ND(without driver) | ||||||||||||||||
When selecting without motor and without gear head, the motor installation hole pitch will vary depending on the motor output power.If you need to use your own motor, driver, and gear head, you can choose the version without motor, without driver, and without gear head.When selecting without motor and without gear head, the main unit will be delivered as parts. Please assemble by the customer according to the assembly procedure instruction manual included in the same package.■ Transmission Capacity Reference Table
Load and Linear Speed Correspondence Table
Test motor: Leadshine (LS) ■Stepper type
Belt width: B=50 mm, thickness 4.5 mm Roller center distance: L=1000 mm Pulley transmission ratio 1:1
When using the 86 stepper motor with a torque of 4.5 Nm, the driver supports an input voltage of 48 V DC. (Power supply not included)
When using the 86 stepper motor with a torque of 8.0 Nm or 12.0 Nm, the driver supports input voltage: 30 V DC to 100 V DC / 20 V AC to 70 V AC, two power supply voltage modes. (Power supply not included)
In actual applications, the relationship between load and linear speed involves multiple factors such as input voltage, current, torque, and speed (r/min). The "Load and Linear Speed Reference Table" is for reference only.
Test motor: Leadshine (LS) ■Stepper type
Belt width: B=50 mm, thickness 4.5 mm Roller center distance: L=1000 mm Pulley transmission ratio 1:1
| Speed (rpm) | Gear head reduction ratio | Recommended Max. linear speed (m/min) | Voltage 48 V DC (current 6 A) | ||
| 86CM45 | 86CM80 | 86CM120 | |||
| Load (kg) | |||||
| 100 | NH | 24 | 1.5 | 3.5 | 4 |
| 200 | 48 | 1 | 2.5 | 3 | |
| 200 | 3 | 16 | 8 | 14 | 17 |
| 5 | 9.6 | 23 | 40 | 49 | |
| 10 | 4.8 | 46 | 50 | 50 | |
| 15 | 3.2 | 50 | 50 | 50 | |
| 20 | 2.4 | 50 | 50 | 50 | |
When using the 86 stepper motor with a torque of 4.5 Nm, the driver supports an input voltage of 48 V DC. (Power supply not included)When using the 86 stepper motor with a torque of 8.0 Nm or 12.0 Nm, the driver supports input voltage: 30 V DC to 100 V DC / 20 V AC to 70 V AC, two power supply voltage modes. (Power supply not included)In actual applications, the relationship between load and linear speed involves multiple factors such as input voltage, current, torque, and speed (r/min). The "Load and Linear Speed Reference Table" is for reference only.Load and Linear Speed Reference Table
Test motor: Leadshine (LS) ■ Servo type
Belt width: B = 50 mm, thickness 4.5 mm Roller center distance: L = 1000 mm Pulley transmission ratio 1:1
When selecting a servo motor, the motor and drive are supplied by default with a single-phase 220 V power supply. In practical applications, the motor rated speed of 3000 r/min is used as the standard for linear speed calculation. During use, programming control can be performed via the host computer as needed.
Test motor: Leadshine (LS) ■ Servo type
Belt width: B = 50 mm, thickness 4.5 mm Roller center distance: L = 1000 mm Pulley transmission ratio 1:1
| Speed (rpm) | Gear head reduction ratio | Recommended Max. linear speed (m/min) | Voltage 220 V AC | |
| 400W | 750W | |||
| Load (kg) | Load (kg) | |||
| 3000 | NH | 60 | 0.5 | 2 |
| 3 | 60 | 9 | 20 | |
| 5 | 60 | 20 | 38 | |
| 10 | 60 | 40 | 50 | |
| 15 | 48 | 50 | 50 | |
| 20 | 36 | 50 | 50 | |
| 25 | 28.8 | 50 | 50 | |
| 30 | 24 | 50 | 50 | |
When selecting a servo motor, the motor and drive are supplied by default with a single-phase 220 V power supply. In practical applications, the motor rated speed of 3000 r/min is used as the standard for linear speed calculation. During use, programming control can be performed via the host computer as needed.Alteration
 | Type · Motor torque/power selection | - | Motor drive reducer selection | - | B selection | - | P (workstation pitch) | - | N (number of workstations) | - | Alteration | ||||
| Motor selection | - | Drive method | - | Planetary reduction ratio | |||||||||||
| When the reducer is not driven by a motor | E-DLFJT45 E-DLFJT45 | - - | YM NM | - - | MC ND | - - | 25 NH | - - | B50 B50 | - - | P60 P60 | - - | N18 N18 | - - | L L |
| Alterations | Code | Spec | ||||||
Reverse motor installation position | MK | Change the motor installation position. Ordering code MK Only available for head drive type | ||||||
Side direct-coupled mounting motor, non-steering type | I | Side direct-coupled installation motor, no steering type Ordering code I | ||||||
Side direct-coupled installation motor, right angle steering type | L | Side direct-coupled installation motor right angle steering type Ordering code L | ||||||
Conveyor belt reverse conveyance | FX | Reverse conveyance Ordering code FX | ||||||
Conveyor belt bidirectional conveyance | SX | Bidirectional conveyance Ordering code SX | ||||||
Increase the number of nuts in the profile groove. Select only when the standard configuration is insufficient(For the quantity of standard specifications, refer to the standard nut allocation table for the profile groove.) | ANQ | Increase the number of nuts in the profile groove Ordering code ANQ5
|
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-DLFJT45-NM-[EC,IO,MC,ND,RS]-NH-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT45-YM-[EC,IO,MC,RS]-[3,5,10,15,20,25,30]-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT45-YM-[EC,IO,MC,RS]-NH-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT80-NM-[EC,IO,MC,ND,RS]-NH-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT80-YM-[EC,IO,MC,RS]-[3,5,10,15,20,25,30]-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT80-YM-[EC,IO,MC,RS]-NH-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT120-NM-[EC,IO,MC,ND,RS]-NH-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT120-YM-[EC,IO,MC,RS]-[3,5,10,15,20,25,30]-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT120-YM-[EC,IO,MC,RS]-NH-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT400-NM-[EC,MC,ND,RS]-NH-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT400-YM-[EC,MC,RS]-[3,5,10,15,20,25,30]-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT400-YM-[EC,MC,RS]-NH-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT750-NM-[EC,MC,ND,RS]-NH-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT750-YM-[EC,MC,RS]-[3,5,10,15,20,25,30]-B50-P[50-400/10]-N[4-50/1] |
| E-DLFJT750-YM-[EC,MC,RS]-NH-B50-P[50-400/10]-N[4-50/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Motor specification |
|---|---|---|---|---|---|
- | 1 Piece(s) | 20 Day(s) or more | 86 stepper motor (torque 4.5 N⋅m) | ||
- | 1 Piece(s) | 20 Day(s) or more | 86 stepper motor (torque 4.5 N⋅m) | ||
- | 1 Piece(s) | 20 Day(s) or more | 86 stepper motor (torque 4.5 N⋅m) | ||
- | 1 Piece(s) | 20 Day(s) or more | 86 stepper motor (torque 8.0 N⋅m) | ||
- | 1 Piece(s) | 20 Day(s) or more | 86 stepper motor (torque 8.0 N⋅m) | ||
- | 1 Piece(s) | 20 Day(s) or more | 86 stepper motor (torque 8.0 N⋅m) | ||
- | 1 Piece(s) | 20 Day(s) or more | 86 stepper motor (torque 12.0 N⋅m) | ||
- | 1 Piece(s) | 20 Day(s) or more | 86 stepper motor (torque 12.0 N⋅m) | ||
- | 1 Piece(s) | 20 Day(s) or more | 86 stepper motor (torque 12.0 N⋅m) | ||
- | 1 Piece(s) | 20 Day(s) or more | Servo motor (400W) | ||
- | 1 Piece(s) | 20 Day(s) or more | Servo motor (400W) | ||
- | 1 Piece(s) | 20 Day(s) or more | Servo motor (400W) | ||
- | 1 Piece(s) | 20 Day(s) or more | Servo motor (750W) | ||
- | 1 Piece(s) | 20 Day(s) or more | Servo motor (750W) | ||
- | 1 Piece(s) | 20 Day(s) or more | Servo motor (750W) |
Loading...
Application Industry
| Equipment Production | Semiconductor | Lithium Battery | ||
 |  |  | ||
| Food | Electronic & Electrical | Robot | ||
 |  |  |
Precaution
(1) When installing onto equipment, ensure the flatness of the aluminum profile is maintained.
(2) Do not disassemble or modify the conveyor on your own to avoid poor performance; stamping, press-fitting, and eccentric load usage are strictly prohibited, as they will affect operational performance and service life.
(3) Due to differences in the operating environment of the conveyor, MISUMI conveyors do not come with a power supply, cable, or switch.
(4) In application, due to issues with the structural strength of the model and the amount of deformation of the body, do not exceed the allowable load or length and width when selecting a model.
(5) Even when the motor is operating in a normal state, its surface temperature may sometimes exceed 70℃. Please exercise caution to avoid burns.
(6) Please use within the load range. The load includes the total weight of the carrier and the product being transported.
(7) Due to the weight of the timing belt itself and the carrier, the lower timing belt of the conveyor will naturally sag. The degree of sag depends on the weight of the carrier and the length of the timing belt.
(8) MISUMI conveyors are adjusted at the factory according to the specified conveying direction. If the actual conveying direction is opposite to the specified direction, normal operation cannot be guaranteed.
(If the conveying direction is not specified, adjustment will be made according to the default conveying direction as shown below.)
(2) Do not disassemble or modify the conveyor on your own to avoid poor performance; stamping, press-fitting, and eccentric load usage are strictly prohibited, as they will affect operational performance and service life.
(3) Due to differences in the operating environment of the conveyor, MISUMI conveyors do not come with a power supply, cable, or switch.
(4) In application, due to issues with the structural strength of the model and the amount of deformation of the body, do not exceed the allowable load or length and width when selecting a model.
(5) Even when the motor is operating in a normal state, its surface temperature may sometimes exceed 70℃. Please exercise caution to avoid burns.
(6) Please use within the load range. The load includes the total weight of the carrier and the product being transported.
(7) Due to the weight of the timing belt itself and the carrier, the lower timing belt of the conveyor will naturally sag. The degree of sag depends on the weight of the carrier and the length of the timing belt.
(8) MISUMI conveyors are adjusted at the factory according to the specified conveying direction. If the actual conveying direction is opposite to the specified direction, normal operation cannot be guaranteed.
(If the conveying direction is not specified, adjustment will be made according to the default conveying direction as shown below.)
Basic Information
| Drive Module Position | Head Drive | Belt Type | Timing belt | Features | Width Narrow |
|---|---|---|---|---|---|
| Motor Voltage | AC220V (Single Phase) | Max. Mass of Conveyed Material(kg) | 50 | Tail Roller Dia. D (Tail Transfer Part R)(mm) | 74.5 |
| Drive Roller Dia.(mm) | 74.5 | Type | Abrasion resistant groove strip guiding type | Maximum conveying speed of this series(m/min) | 720 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Flat Belt Conveyors - With Meandering Prevention Crosspiece, Head Drive, 3-Groove Frame
- Timing Belt Conveyors - Dual Track, Center Drive, 2-Groove Frame
- Flat Belt Conveyors - Built-in Motor Type - 2-Groove Frame
- Flat Belt Conveyors, Low Profile - Center Drive, 1-Slot Frame (Pulley Dia. 15mm)
- Flat Belt Conveyor, Head driver, Pulley Dia. 50mm
- Timing Belt Conveyor, Dual Track, Center Driver, Pulley Dia. 30mm
- Job conveyor trough belt type belt conveyor
- Belcon Mini III Belt width = Frame Width Type for Transferring Small Items Between Conveyors DMJW
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy