(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Conveyor with one side roller chain, center drive, pulley diameter 39 mm
Part Number
Configured Part Number is shown.
Product overview
Economical conveyor with a reasonable structure design, enabling localized production. Multiple types of models are available to meet customers' design requirements for different usage scenarios, providing better selection options.
E-DCGZL: Roller chain type, heavy load type. The chain used is equipped with nylon rollers on one side, offering high activity and high abrasion resistance. Suitable for pallet-type accumulation conveying. The recessed retaining edge design prevents pallets from slipping off.
E-DCGZL: Roller chain type, heavy load type. The chain used is equipped with nylon rollers on one side, offering high activity and high abrasion resistance. Suitable for pallet-type accumulation conveying. The recessed retaining edge design prevents pallets from slipping off.
Product feature
Feature 1: Conveyance speed is accurate and stable, ensuring precise synchronous conveyance;
Feature 2: Easy to achieve accumulation conveyance, can be used as an assembly production line or for material storage conveyance;
Feature 3: Can operate reliably in various harsh environments (high temperature environment of 80℃, dusty environment);
Feature 2: Easy to achieve accumulation conveyance, can be used as an assembly production line or for material storage conveyance;
Feature 3: Can operate reliably in various harsh environments (high temperature environment of 80℃, dusty environment);
Specification overview
■ Material table
Dimensional drawing| Part name |  Material |  Surface treatment |
| Roller chain | S45C + nylon | - |
| Idler | S45C | - |
| Profile | Aluminum | Electrophoresis |
| Motor cover | Aluminum | Painted baked paint |
| Pulley holder | Zinc alloy | Painted baked paint |
E-DCGZL
Motor specification: 60W*
The rollers in the roller chain are made of nylon material, and the maximum load for each roller is 5 kg.
The actual load depends on the roller quantity of nylon rollers in contact.
When L ≤ 700, there is no countersunk hole at position F, and four nuts are pre-installed on one side inside the aluminum profile groove;
When L>700, a countersunk hole is reserved by default at position F for nut insertion, so no additional processing is required.
The support beams can move in the L length direction: L<1000, 2 pcs; L1000 to 1800, 3 pcs; L1805 to 2600, 4 pcs; L2605 to 3400, 5 pcs; L>3400, 6 pcs.
*Differences in power only affect the motor size. For the A dimension, please refer to the table below. The external dimensions of the other parts remain the same.
■ A dimension detail table
The rollers in the roller chain are made of nylon material, and the maximum load for each roller is 5 kg.The actual load depends on the roller quantity of nylon rollers in contact.
When L ≤ 700, there is no countersunk hole at position F, and four nuts are pre-installed on one side inside the aluminum profile groove;When L>700, a countersunk hole is reserved by default at position F for nut insertion, so no additional processing is required.
The support beams can move in the L length direction: L<1000, 2 pcs; L1000 to 1800, 3 pcs; L1805 to 2600, 4 pcs; L2605 to 3400, 5 pcs; L>3400, 6 pcs.*Differences in power only affect the motor size. For the A dimension, please refer to the table below. The external dimensions of the other parts remain the same.
■ A dimension detail table
| Motor power | Motor | Reduction ratio | A | |
| Specification | Manufacturer | |||
| 60W | Inverter type | GPG | 3 to 18 | L168 |
| 25 to 180 | L186 | |||
| Speed regulation type | 3 to 18 | L179.5 | ||
| 25 to 180 | L197.5 | |||
| Inverter type | JSCC | 3 to 18 | L171 | |
| 25 to 180 | L191 | |||
| Speed regulation type | 3 to 18 | L182 | ||
| 25 to 180 | L202 | |||
| 90W | Inverter type | GPG | 3 to 18 | L183 |
| 25 to 180 | L201 | |||
| Speed regulation type | 3 to 18 | L194.5 | ||
| 25 to 180 | L212.5 | |||
| Inverter type | JSCC | 3 to 18 | L186 | |
| 25 to 180 | L206 | |||
| Speed regulation type | 3 to 18 | L197 | ||
| 25 to 180 | L217 | |||
| 120W | Inverter type | GPG | 3 to 18 | L183 |
| 25 to 180 | L201 | |||
| Speed regulation type | 3 to 18 | L194.5 | ||
| 25 to 180 | L212.5 | |||
| Inverter type | JSCC | 3 to 18 | L196 | |
| 25 to 180 | L216 | |||
| Speed regulation type | 3 to 18 | L207 | ||
| 25 to 180 | L227 | |||
Enlarged view of profile cross-section (left and right symmetrical)
Standard nut allocation table for profile groove: L value (center distance unit: mm)Nuts are shipped with the conveyor as accessories and are not displayed in the CAD model.
Standard nut allocation table for profile groove: L value (center distance unit: mm)
Nuts are shipped with the conveyor as accessories and are not displayed in the CAD model. | L550 to 999 | L1000 to 1499 | L1500 or more | Position | Specification | Configuration type |
| 8PCS | 12PCS | 16PCS | - | M6 (square) | Accessory |
Specification table
Please follow the selection procedure 
to 
, select the type and parameters, and then proceed with ordering.
■ Specification table
When selecting without motor and without gear head, the motor installation hole pitch will vary depending on the motor output power.
If stepper or servo motor automatic control is required, you can select the version without motor and without gear head.
When selecting without motor and without gear head, the main unit will be delivered as parts. Please assemble by the customer according to the assembly procedure instruction manual included in the same package.
When selecting the INV inverter motor, the inverter is delivered together as an accessory.
to 
, select the type and parameters, and then proceed with ordering. | Type | - |  B | - |  L | - | Motor selection | - | Motor manufacturer selection | ||||
 Output power | - |  Specification | - |  Gear head reduction ratio | |||||||||
| When there is no motor or gear head | E-DCGZL E-DCGZL | - - | 200 200 | - - | 1000 1000 | - - | 60 60 | - - | SCM NM | - - | 25 NH | - - | G R |
■ Specification table
| Type | Type | Machine characteristics |
| E-DCGZL | Pallet accumulation conveyance | Active rollers can be combined with a stop mechanism for accumulation, suitable for pallet-type accumulation conveyance. Features high abrasion resistance, a recessed retaining edge design, and is convenient for parallel or connected multi-line conveyance. |
| Type | B selection specified unit 10 mm | L Specified unit 5 mm | Motor selection | Motor | Roller chain specification | ||||||||||||||||||||||
| Output power (W) | Specification | Gear head reduction ratio | |||||||||||||||||||||||||
| E-DCGZL | 80 to 500 | 550 to 4000 | 60 90 120 | SCM (Single-phase 220 V speed regulation type) |
| G(GPG - Taiban motor) J(JSCC - Jingyan motor) | S45C + nylon · black | ||||||||||||||||||||
| INV (3-phase 220 V inverter type) | |||||||||||||||||||||||||||
| NM(without motor) | NH(without gear head) | R(without motor and gear head) | |||||||||||||||||||||||||
When selecting without motor and without gear head, the motor installation hole pitch will vary depending on the motor output power.If stepper or servo motor automatic control is required, you can select the version without motor and without gear head.When selecting without motor and without gear head, the main unit will be delivered as parts. Please assemble by the customer according to the assembly procedure instruction manual included in the same package. When selecting the INV inverter motor, the inverter is delivered together as an accessory.■ Transmission capacity
Test motor: JSCC (J) timing pulley transmission ratio 1:1. Chain width: 2x10 mm, roller center distance: L=3000 mm
The chart shows the transport capacity under horizontal condition.
The transport capacity will vary depending on the operating condition.
When selecting a speed regulation motor, the transport capacity does not increase as the speed decreases.
Test motor: JSCC (J) timing pulley transmission ratio 1:1. Chain width: 2x10 mm, roller center distance: L=3000 mmThe chart shows the transport capacity under horizontal condition.The transport capacity will vary depending on the operating condition.When selecting a speed regulation motor, the transport capacity does not increase as the speed decreases.■ Gear head reduction ratio
INV inverter type: Reference value of belt chain speed when the motor speed is 1300 rpm (50 Hz).
INV inverter type: Reference value of belt chain speed when the motor speed is 1300 rpm (50 Hz). | Gear head reduction ratio | Belt chain speed (m/min) | |
| SCM speed regulation type | INV inverter type | |
| 12.5 | 11.6 to 19.3 | 24.1 |
| 15 | 9.7 to 16.1 | 20.0 |
| 18 | 8.1 to 13.4 | 16.7 |
| 25 | 5.8 to 9.7 | 12.0 |
| 30 | 4.8 to 8.1 | 10.0 |
| 36 | 4.0 to 6.7 | 8.4 |
| 50 | 2.9 to 4.8 | 6.0 |
| 60 | 2.4 to 4.0 | 5.0 |
| 75 | 1.9 to 3.2 | 4.0 |
| 90 | 1.6 to 2.7 | 3.3 |
| 100 | 1.4 to 2.4 | 3.0 |
| 120 | 1.2 to 2.0 | 2.5 |
| 150 | 1.0 to 1.6 | 2.0 |
| 180 | 0.8 to 1.3 | 1.7 |
Alteration
 | Type | - | B | - | L | - | Motor selection | - | Motor manufacturer selection | - | Alteration | ||||
| Output power | - | Specification | - | Gear head reduction ratio | |||||||||||
| E-DCGZL | - | 200 | - | 1000 | - | 60 | - | SCM | - | 25 | - | G | - | MK | |
| Alterations | Code | Spec | ||||||
Reverse motor installation position | MK | Change motor installation position Ordering code MK | ||||||
Driving part position specification | MP | Change driving part mounting position Ordering code MP300 200<MP<L-200 *Minimum value of L is 550 Only center drive type can be specified. | ||||||
Conveyor belt reverse conveyance | FX | Reverse conveyance Ordering code FX | ||||||
Conveyor belt bidirectional conveyance | SX | Bidirectional conveyance Ordering code SX | ||||||
Increase the number of nuts in the profile groove. Select only when the standard configuration is insufficient(For the quantity of standard specifications, refer to the standard nut allocation table for the profile groove.) | ANQ | Increase the number of nuts in the profile groove Ordering code ANQ5
|
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-DCGZL-[80-500/10]-[550-4000/5]-[60,90,120]-[INV,NM,SCM]-NH-[G,J,R] |
| E-DCGZL-[80-500/10]-[550-4000/5]-[60,90,120]-[INV,SCM]-[12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-[G,J,R] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship |
|---|---|---|---|---|
- | 1 Piece(s) | 17 Day(s) or more | ||
- | 1 Piece(s) | 17 Day(s) or more |
Loading...
Application Industry
| Equipment Production | Semiconductor | Lithium Battery | ||
 |  |  | ||
| Food | Electronic & Electrical | Robot | ||
 |  |  |
Precaution
(1) When installing onto equipment, ensure the flatness of the aluminum profile is maintained.
(2) Do not disassemble or modify the conveyor by yourself to avoid causing performance defects.
(3) Due to differences in the operating environment of the conveyor, MISUMI conveyors do not come with a power supply, cable, or switch.
(4) In application, due to issues with the structural strength of the model and the amount of deformation of the body, do not exceed the allowable load or length and width when selecting a model.
(5) Even when the motor is operating in a normal state, its surface temperature may sometimes exceed 70℃. Please exercise caution to avoid burns.
(6) Friction between the roller chain and the aluminum profile can easily generate high noise (over 60 dB) in high speed applications; active roller chains are treated with additional grease, and during long-term operation, liquid grease contamination may occur.
(7) MISUMI conveyors are adjusted at the factory according to the specified conveying direction. If the actual conveying direction is opposite to the specified direction, normal operation cannot be guaranteed.
(If the conveying direction is not specified, the default adjustment will be made according to the standard conveying direction as shown below.)
(2) Do not disassemble or modify the conveyor by yourself to avoid causing performance defects.
(3) Due to differences in the operating environment of the conveyor, MISUMI conveyors do not come with a power supply, cable, or switch.
(4) In application, due to issues with the structural strength of the model and the amount of deformation of the body, do not exceed the allowable load or length and width when selecting a model.
(5) Even when the motor is operating in a normal state, its surface temperature may sometimes exceed 70℃. Please exercise caution to avoid burns.
(6) Friction between the roller chain and the aluminum profile can easily generate high noise (over 60 dB) in high speed applications; active roller chains are treated with additional grease, and during long-term operation, liquid grease contamination may occur.
(7) MISUMI conveyors are adjusted at the factory according to the specified conveying direction. If the actual conveying direction is opposite to the specified direction, normal operation cannot be guaranteed.
(If the conveying direction is not specified, the default adjustment will be made according to the standard conveying direction as shown below.)
Basic Information
| Drive Module Position | Center Drive | Belt Type | Plastic Chain | Motor Voltage | 220 V |
|---|---|---|---|---|---|
| Max. Mass of Conveyed Material(kg) | 50 | Type | Pallet accumulation transport | Maximum conveying speed of this series(m/min) | 24.1 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Flat Belt Conveyors - Head Drive, 3-Groove Frame (Pulley Dia. 50mm)
- Flat Belt Conveyor, Head driver, High Load Type, Pulley Dia. 50mm
- Timing Belt Conveyor, Dual Track, Head Driver, Pulley Dia. 70mm
- Conveyor for carrier use, single row timing belt, head drive, pulley diameter 74.5 mm
- Belt Conveyor Mini Ultra-Compact Belt Conveyor, Center Drive, Non-Wandering
- Job conveyor roller edge type belt conveyor
- Belgotch TYPE34 Belt Cleat Type (Head Drive)
- Belcon Mini III Short Machine Length Roller Edge Type for Transferring Small Items Between Conveyors DMJR
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy