(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Flat Belt Conveyor, Head Drive, Full Profile (Part Numbers)
Click this image to zoom it.
Move the mouse over the image to zoom
- Economy
MiSUMi Economy
Economy series Belt Conveyor
(i)Caution
- This single-phase motor is specified for 220V ±10%,50Hz/60Hz. Please ensure it is used within the permissible voltage range.
Part Number
Configured Part Number is shown.
Product overview
Economical conveyor with a reasonable structure design, enabling localized production. Multiple types of models are available to meet customers' design requirements for different usage scenarios, providing better selection options.
E-SVKA/E-SVKB: This series uses a frame with integrated molding, featuring a simple structure and easy assembly, thereby achieving low price and short delivery time.
E-SVKA/E-SVKB: This series uses a frame with integrated molding, featuring a simple structure and easy assembly, thereby achieving low price and short delivery time.
Product feature
Feature 1: The conveyor body uses an aluminum profile, achieving an overall lightweight design.
Feature 2: Light load, edge wrapping design, suitable for customized configuration of free specified length and width.
Feature 3: The belt width can be specified in increments of 50 mm, and the pulley spacing can be specified in increments of 5 mm.
Feature 2: Light load, edge wrapping design, suitable for customized configuration of free specified length and width.
Feature 3: The belt width can be specified in increments of 50 mm, and the pulley spacing can be specified in increments of 5 mm.
Specification overview
■ Material table
■ Flat belt width - pulley center distance correspondence table
| Part name |  Material |  Surface treatment |
| Profile | Aluminum | Electrophoresis |
| Motor cover | Aluminum | Painted baked paint |
| Pulley holder | Aluminum | Painted baked paint |
■ Flat belt width - pulley center distance correspondence table
| Model | Belt width B | Pulley center distance L | |||||
| L390 to 400 | L405 to 500 | L505 to 600 | L605 to 700 | L705 to 800 | L805 to 3000 | ||
| E-SVKA E-SVKB | 50 | ● | ● | ● | ● | ● | ● |
| 100 | ● | ● | ● | ● | ● | ● | |
| 150 | - | - | ● | ● | ● | ● | |
| 200 | - | - | - | ● | ● | ● | |
| 250 | - | - | - | - | - | ● | |
Dimensional drawing
E-SVKA/E-SVKBMotor specification: 6W*
When L > 2000, one belt support roller is included.
The dimensions in the drawing are for belt specification H9 (thickness 0.9 mm). Please note that the belt thickness varies depending on the belt specification.
Please refer to the flat belt specification list. Click
here.
When L ≤ 500, there is no countersunk hole at position F, and four nuts are pre-installed on one side inside the aluminum profile groove.
When L > 500, a countersunk hole for inserting nuts is reserved by default at position F, and no additional machining is required.
In the Z section of the aluminum profile groove, nuts cannot be moved within this range.
When selecting a speed control motor, the speed controller is supplied as an accessory, is not installed on the main unit, and does not include a mounting bracket.
If a bracket for the speed controller is required, please use additional machining (SCB).
*Differences in power only affect the motor size. For the A dimension, please refer to the table below; the external dimensions of the other components remain the same.
When L > 2000, one belt support roller is included.The dimensions in the drawing are for belt specification H9 (thickness 0.9 mm). Please note that the belt thickness varies depending on the belt specification.Please refer to the flat belt specification list. Click
here.When L ≤ 500, there is no countersunk hole at position F, and four nuts are pre-installed on one side inside the aluminum profile groove.When L > 500, a countersunk hole for inserting nuts is reserved by default at position F, and no additional machining is required.
In the Z section of the aluminum profile groove, nuts cannot be moved within this range.When selecting a speed control motor, the speed controller is supplied as an accessory, is not installed on the main unit, and does not include a mounting bracket.If a bracket for the speed controller is required, please use additional machining (SCB).
*Differences in power only affect the motor size. For the A dimension, please refer to the table below; the external dimensions of the other components remain the same.
Enlarged view of profile cross-section (left and right symmetrical)
Standard nut allocation table for profile groove: L value (center distance unit: mm)Nuts are shipped with the conveyor as accessories and are not displayed in the CAD model.
Standard nut allocation table for profile groove: L value (center distance unit: mm)
Nuts are shipped with the conveyor as accessories and are not displayed in the CAD model.| L390 to 999 | L1000 to 1499 | L1500 or more | Position | Specification | Configuration type |
| 4PCS | 6PCS | 8PCS | Section I (left and right) | M5 (square) | Accessory |
■ A dimension detailed table (speed regulation/inverter motor)
| Motor power | Motor | Reduction ratio | A | |
| Specification | Manufacturer | |||
| 6W | Speed regulation type | GPG | 3 to 18 | L118 |
| 25 to 180 | L128.5 | |||
| JSCC | 3 to 18 | L118 | ||
| 25 to 180 | L130 | |||
| 25W | Inverter type | GPG | 3 to 18 | L118 |
| 25 to 180 | L130 | |||
| Speed regulation type | 3 to 18 | L129 | ||
| 25 to 180 | L141 | |||
| Inverter type | JSCC | 3 to 18 | L119 | |
| 25 to 180 | L130 | |||
| Speed regulation type | 3 to 18 | L129 | ||
| 25 to 180 | L140 | |||
| 40W | Inverter type | GPG | 3 to 18 | L148 |
| 25 to 180 | L166 | |||
| Speed regulation type | 3 to 18 | L159 | ||
| 25 to 180 | L177 | |||
| Inverter type | JSCC | 3 to 18 | L152 | |
| 25 to 180 | L172 | |||
| Speed regulation type | 3 to 18 | L162 | ||
| 25 to 180 | L182 | |||
■ A dimension detailed table (stepper motor)
■ A dimension detailed table (servo motor)
■ A dimension detail table (planetary reducer)
When a stepper motor or servo motor is selected and a planetary reducer is configured, the A dimension shown in the diagram is the sum of the motor A dimension and the planetary reducer A dimension.
| Name | Motor model | A |
| Leadshine stepper motor (open loop) | 57CM23 | L76 |
| 57CM26 | L85 | |
| 57CM31 | L88 | |
| 86CM45 | L80 | |
| 86CM80 | L98 |
■ A dimension detailed table (servo motor)
| Servo motor | Brand | A |
| 400W servo motor | Leadshine servo motor | L90.1 |
■ A dimension detail table (planetary reducer)
| Gear ratio (x) | Supported motor specification | A |
| 3 5 10 | Equipped with a 400W servo motor | |
| L77 | ||
| 3 5 10 | Equipped with a 57 stepper motor | |
| L77 | ||
| 3 5 10 | Equipped with an 86 stepper motor | L110 |
When a stepper motor or servo motor is selected and a planetary reducer is configured, the A dimension shown in the diagram is the sum of the motor A dimension and the planetary reducer A dimension.Specification table
Please follow the selection procedure 
to 
, select the type and parameters, and then proceed with ordering.
■ Specification table
■ Speed control/inverter type
When selecting the INV inverter motor, the inverter is delivered together as an accessory.
■ Stepper type
When using a 57 stepper, the driver supports an input voltage of 24 V DC to 48 V DC. (Power supply not included)
When using an 86 stepper with a torque of 4.5 N⋅m, the driver supports an input voltage of 48 V DC. (Power supply not included)
When using an 86 stepper with a torque of 8.0 N⋅m, the driver supports an input voltage of 24 V DC to 70 V DC or 48 V AC to 70 V AC, two types of power supply voltages. (Power supply not included)
■ Servo type
When a servo motor is selected, the motor and driver are supplied by default with a single-phase 220 V power supply. In conveyor applications, a motor rated speed of 3000 r/min is used as the standard for linear speed calculation. During use, control can be customized through host computer programming.
The belt thickness is the nominal thickness; the actual thickness is one-tenth of this value, with the unit in mm.
For oil resistance specifications, only the transmission surface is oil resistant. If oil gets on the back of the belt, it may become unusable.
When selecting without motor and without gear head, the motor installation hole pitch will vary depending on the motor output power.
When selecting without motor and without gear head, the main unit will be delivered as parts. Please assemble by the customer according to the assembly procedure instruction manual included in the same package.
For belts other than those above, please refer to the specification overview by clicking here.
Table 1: Gear head reduction ratio & transmission capacity (speed regulation/inverter motor)
to 
, select the type and parameters, and then proceed with ordering. | Type | - |  B | - |  L | - | Motor selection | - |  Belt specification | - | Motor manufacturer selection | ||||
 Output power | - |  Specification | - |  Gear head reduction ratio | |||||||||||
| When there is no pulley When there is no motor or gear head | E-SVKA E-SVKA E-SVKA | - - - | 150 150 150 | - - - | 1000 1000 1000 | - - - | 25 25 25 | - - - | SCM INV NM | - - - | 25 25 NH | - - - | H9 J H9 | - - - | G G R |
■ Specification table
| Type | Type | Machine characteristics |
| E-SVKA | Arc surface roller deviation prevention | Good flat belt surface contact, high flatness precision |
| E-SVKB | Belt with guide strip for deviation prevention | Belt deviation prevention is stable, but there is a slight bulge at the bonding area of the center guide strip on the flat belt |
■ Speed control/inverter type
| Type | B selection | L Specified unit 5 mm | Motor selection | Belt specification (Material is generally PU) | Motor | ||
| Torque (N⋅m)/Power (W) | Specification/Drive method | Gear head reduction ratio | |||||
| E-SVKA (Arc surface roller type) E-SVKB (With guide strip type) | 50 100 150 200 250 | 390 to 3000 | 6 25 40 (Power W) Caution: 6 is not suitable for variable frequency | SCM (Single-phase 220 V speed regulation type) | 5 7.5 10 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180 Caution: When the output power is 6, 5–10 are not applicable. | H9(general use · green) W9(general use · white) U5(sliding · green) S5(sliding · white) D9(anti-static · black) F12(for food conveyance · white) O9(oil-resistant specification · green) Q10(for inclined use · green) Y12(general use · yellow PVC) V12(general use · red PVC) J(without belt) | G(GPG - Taiban motor) J(JSCC - Jingyan motor) |
| INV (3-phase 220 V inverter type) | |||||||
| NM(without motor) | NH(without gear head) | R(without motor and gear head) | |||||
When selecting the INV inverter motor, the inverter is delivered together as an accessory.■ Stepper type
| Type | B selection | L Specified unit 5 mm | Motor selection | Belt specification (Material is generally PU) | Motor | ||
| Torque (N⋅m)/Power (W) | Specification/Drive method | Gear head reduction ratio | |||||
| E-SVKA57 E-SVKA86 (arc roller type) E-SVKB57 E-SVKB86 (with guide strip type) | 50 100 150 200 250 | 390 to 3000 | 2.3 2.6 3.1 (57 stepper type / torque N⋅m) | MC(pulse universal type) IO(IO control type) EC(bus EtherCAT) RS(RS485) | 3 5 10 NH(without gear head) Caution: 3 to 10 are single pole | H9(general use · green) W9(general use · white) U5(sliding · green) S5(sliding · white) D9(anti-static · black) F12(for food conveyance · white) O9(oil-resistant specification · green) Q10(for inclined use · green) Y12(general use · yellow PVC) V12(general use · red PVC) J(without belt) | LS (Leisai motor) |
| 4.5 8.0 (86 stepper type / torque N⋅m) | |||||||
| NM(No motor · drive) | R (without motor, driver, and gear head) | ||||||
When using a 57 stepper, the driver supports an input voltage of 24 V DC to 48 V DC. (Power supply not included)When using an 86 stepper with a torque of 4.5 N⋅m, the driver supports an input voltage of 48 V DC. (Power supply not included)When using an 86 stepper with a torque of 8.0 N⋅m, the driver supports an input voltage of 24 V DC to 70 V DC or 48 V AC to 70 V AC, two types of power supply voltages. (Power supply not included)■ Servo type
| Type | B selection | L Specified unit 5 mm | Motor selection | Belt specification (Material is generally PU) | Motor | ||
| Torque (N⋅m)/Power (W) | Specification/Drive method | Gear head reduction ratio | |||||
| E-SVKA4 (arc roller type) E-SVKB4 (with guide bar type) | 50 100 150 200 250 | 390 to 3000 | 400 (servo type power W) | MC(pulse universal type) EC(EtherCAT bus) | 3 5 10 NH(without gear head) Caution: 3 to 10 are single pole | H9(general use · green) W9(general use · white) U5(sliding · green) S5(sliding · white) D9(anti-static · black) F12(for food conveyance · white) O9(oil-resistant specification · green) Q10(for inclined use · green) Y12(general use · yellow PVC) V12(general use · red PVC) J(without belt) | LS (Leadshine motor) |
| NM(No motor · drive) | R(without motor, drive, or gear head) | ||||||
When a servo motor is selected, the motor and driver are supplied by default with a single-phase 220 V power supply. In conveyor applications, a motor rated speed of 3000 r/min is used as the standard for linear speed calculation. During use, control can be customized through host computer programming.The belt thickness is the nominal thickness; the actual thickness is one-tenth of this value, with the unit in mm.For oil resistance specifications, only the transmission surface is oil resistant. If oil gets on the back of the belt, it may become unusable.When selecting without motor and without gear head, the motor installation hole pitch will vary depending on the motor output power.When selecting without motor and without gear head, the main unit will be delivered as parts. Please assemble by the customer according to the assembly procedure instruction manual included in the same package.For belts other than those above, please refer to the specification overview by clicking here.Table 1: Gear head reduction ratio & transmission capacity (speed regulation/inverter motor)
■ Transmission capacity
Test motor: JSCC (J) timing pulley transmission ratio 2:1
Belt width: B=250 mm, thickness 0.9 mm Roller center distance: L=3000 mm
Test motor: JSCC (J) timing pulley transmission ratio 2:1Belt width: B=250 mm, thickness 0.9 mm Roller center distance: L=3000 mm
| Gear head reduction ratio | Flat belt speed (m/min) | |
| SCM speed regulation type | INV inverter type | |
| 5 | 30.5 to 50.9 | 63.3 |
| 7.5 | 20.3 to 33.9 | 42.2 |
| 10 | 15.3 to 25.4 | 31.7 |
| 12.5 | 12.2 to 20.3 | 25.3 |
| 15 | 10.2 to 17.0 | 21.1 |
| 18 | 8.5 to 14.1 | 17.6 |
| 25 | 6.1 to 10.2 | 12.7 |
| 30 | 5.1 to 8.5 | 10.6 |
| 36 | 4.2 to 7.1 | 8.8 |
| 50 | 3.1 to 5.1 | 6.3 |
| 60 | 2.5 to 4.2 | 5.3 |
| 75 | 2.0 to 3.4 | 4.2 |
| 90 | 1.7 to 2.8 | 3.5 |
| 100 | 1.5 to 2.5 | 3.2 |
| 120 | 1.3 to 2.1 | 2.6 |
| 150 | 1.0 to 1.7 | 2.1 |
| 180 | 0.8 to 1.4 | 1.8 |
| Speed (rpm) | Gear head reduction ratio | Recommended Max. linear speed (m/min) | Voltage 24 V DC (current 5 A) | Voltage 48 V DC (current 6 A) | |||
| 57CM23 | 57CM26 | 57CM31 | 86CM45 | 86CM80 | |||
| Load (kg) | |||||||
| 50 | NH | 9.4 | 1 | 1 | 2 | 3.5 | 6.5 |
| 100 | 18.8 | 0.5 | 0.5 | 1.5 | 2.5 | 5 | |
| 100 | 3 | 6.3 | 4.5 | 5 | 8.5 | 14 | 15 |
| 5 | 3.8 | 12 | 13 | 15 | 15 | 15 | |
| 10 | 1.9 | 15 | 15 | 15 | 15 | 15 | |
Test motor: Leadshine (LS) timing pulley transmission ratio 2:1Belt width: B=200 mm, thickness 0.9 mm, roller center distance: L=1000 mm
Table 3: Correspondence table of load and linear speed (servo motor)
| Speed (rpm) | Gear head reduction ratio | Recommended Max. linear speed (m/min) | Voltage 220 V AC |
| 400W | |||
| Load (kg) | |||
| 3000 | NH | 100 | 1.5 |
| 3 | 100 | 15 | |
| 5 | 100 | 15 | |
| 10 | 56 | 15 |
Test motor: Leadshine (LS) timing pulley transmission ratio 2:1Belt width: B = 200 mm, thickness 0.9 mm, roller center distance: L = 1000 mm
The transmission capacity will vary depending on the operating condition.The chart shows the transmission capacity under horizontal conditions.When selecting a speed regulation motor, the transmission capacity does not increase as the speed decreases.When selecting a speed regulation motor, the transport capacity will vary depending on the motor brand.Alteration
 | Type | - | B | - | L | - | Motor selection | - | Belt specification | - | Motor manufacturer selection | - | Alteration | ||||
| Output power | - | Specification | - | Gear head reduction ratio | |||||||||||||
| E-SVKA | - | 150 | - | 1000 | - | 25 | - | SCM | - | 25 | - | H9 | - | G | - | MK | |
| Alterations | Code | Spec | ||||||
Reverse motor installation position | MK | The motor installation position can be changed. Ordering code MK Can only be specified for head drive type. | ||||||
Mounting bracket for speed controller | SCB | Comes with a mounting bracket for the speed controller. Ordering code SCB | ||||||
Conveyor belt reverse conveyance | FX | Reverse conveyance. Ordering code FX | ||||||
Conveyor belt bidirectional conveyance Only supports models with guide strips | SX | Bidirectional conveyance. Ordering codeSX | ||||||
Increase the number of nuts in the profile groove. Select only when the standard quantity is insufficient (see dimensional drawing information for standard quantity and specification) | ANQ | Increase the quantity of nuts in the profile groove. Ordering codeANQ5
|
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-[3,5,10]-[F12,J]-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-[3,5,10]-D9-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-[3,5,10]-H9-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-[3,5,10]-O14-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-[3,5,10]-Q10-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-[3,5,10]-S5-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-[3,5,10]-U5-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-[3,5,10]-V12-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-[3,5,10]-W9-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-[3,5,10]-Y12-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-NH-[F12,J]-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-NH-D9-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-NH-H9-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-NH-O14-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-NH-Q10-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-NH-S5-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-NH-U5-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-NH-V12-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-NH-W9-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-[EC,MC]-NH-Y12-[LS,R] |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-NM-NH-[F12,J]-R |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-NM-NH-D9-R |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-NM-NH-H9-R |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-NM-NH-O14-R |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-NM-NH-Q10-R |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-NM-NH-S5-R |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-NM-NH-U5-R |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-NM-NH-V12-R |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-NM-NH-W9-R |
| E-SVKA4-[50,100,150,200,250]-[390-3000/5]-400-NM-NH-Y12-R |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-[3,5,10]-[F12,J]-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-[3,5,10]-D9-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-[3,5,10]-H9-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-[3,5,10]-O14-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-[3,5,10]-Q10-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-[3,5,10]-S5-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-[3,5,10]-U5-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-[3,5,10]-V12-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-[3,5,10]-W9-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-[3,5,10]-Y12-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-NH-[F12,J]-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-NH-D9-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-NH-H9-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-NH-O14-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-NH-Q10-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-NH-S5-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-NH-U5-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-NH-V12-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-NH-W9-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-[EC,IO,MC,RS]-NH-Y12-[LS,R] |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-NM-NH-[F12,J]-R |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-NM-NH-D9-R |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-NM-NH-H9-R |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-NM-NH-O14-R |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-NM-NH-Q10-R |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-NM-NH-S5-R |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-NM-NH-U5-R |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-NM-NH-V12-R |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-NM-NH-W9-R |
| E-SVKA57-[50,100,150,200,250]-[390-3000/5]-[2.3,2.6,3.1]-NM-NH-Y12-R |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-[3,5,10]-[F12,J]-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-[3,5,10]-D9-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-[3,5,10]-H9-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-[3,5,10]-O14-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-[3,5,10]-Q10-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-[3,5,10]-S5-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-[3,5,10]-U5-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-[3,5,10]-V12-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-[3,5,10]-W9-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-[3,5,10]-Y12-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-NH-[F12,J]-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-NH-D9-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-NH-H9-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-NH-O14-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-NH-Q10-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-NH-S5-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-NH-U5-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-NH-V12-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-NH-W9-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-[EC,IO,MC,RS]-NH-Y12-[LS,R] |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-NM-NH-[F12,J]-R |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-NM-NH-D9-R |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-NM-NH-H9-R |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-NM-NH-O14-R |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-NM-NH-Q10-R |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-NM-NH-S5-R |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-NM-NH-U5-R |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-NM-NH-V12-R |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-NM-NH-W9-R |
| E-SVKA86-[50,100,150,200,250]-[390-3000/5]-[4.5,8]-NM-NH-Y12-R |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Conveyance Length | Belt Width/Belt Pitch B (mm) | Meandering Prevention | Type | Output Power (W) | Specifications | Gear Head Reduction Ratio | Belt Specifications | Motor |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Food Conveyance · White / No belt | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Anti-Static Use · Black | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | General Use · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | Oil-resistant Specification · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Incline · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Sliding · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Sliding · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | General Use · Red PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | General Use · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | General Use · Yellow PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Food Conveyance · White / No belt | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Anti-Static Use · Black | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | General Use · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | Oil-resistant Specification · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Incline · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Sliding · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Sliding · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | General Use · Red PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | General Use · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | General Use · Yellow PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Food Conveyance · White / No belt | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Anti-Static Use · Black | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | General Use · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | Oil-resistant Specification · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Incline · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Sliding · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Sliding · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | General Use · Red PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | General Use · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | General Use · Yellow PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Food Conveyance · White / No belt | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Anti-Static Use · Black | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | General Use · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | Oil-resistant Specification · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Incline · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Sliding · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Sliding · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | General Use · Red PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | General Use · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | General Use · Yellow PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Food Conveyance · White / No belt | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Anti-Static Use · Black | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | General Use · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | Oil-resistant Specification · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Incline · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Sliding · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Sliding · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | General Use · Red PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | General Use · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | General Use · Yellow PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Food Conveyance · White / No belt | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Anti-Static Use · Black | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | General Use · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | Oil-resistant Specification · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Incline · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Sliding · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Sliding · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | General Use · Red PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | General Use · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | General Use · Yellow PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Food Conveyance · White / No belt | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Anti-Static Use · Black | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | General Use · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | Oil-resistant Specification · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Incline · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Sliding · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | For Sliding · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | General Use · Red PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | General Use · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | 5 ～ 10 | General Use · Yellow PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Food Conveyance · White / No belt | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Anti-Static Use · Black | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | General Use · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | Oil-resistant Specification · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Incline · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Sliding · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | For Sliding · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | General Use · Red PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | General Use · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | - | NH (Gearless Head) | General Use · Yellow PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Food Conveyance · White / No belt | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Anti-Static Use · Black | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | General Use · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | Oil-resistant Specification · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Incline · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Sliding · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | For Sliding · Green | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | General Use · Red PVC | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | General Use · White | R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) or more | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Arc surface roller deviation prevention | - | NM (No Motor) | NH (Gearless Head) | General Use · Yellow PVC | R (No Motor · Gear Head) |
Loading...
Application Industry
| Equipment Production | Semiconductor | Lithium Battery | ||
 |  |  | ||
| Food | Electronic & Electrical | Robot | ||
 |  |  |
Precaution
(1) Do not disassemble or modify the conveyor by yourself to avoid causing performance defects.
(2) Due to differences in the operating environment of the conveyor, MISUMI conveyors do not come with a power supply, cable, or switch.
(3) Due to issues with the structural strength and deformation of the machine body, please do not exceed the allowable load or length and width when selecting a model.
(4) The motor is available in two voltage specifications: single-phase 220 V and 3-phase 220 V. Please select the voltage according to your usage requirements.
(5) Belt deviation is a normal phenomenon and does not constitute a quality problem. Deviation adjustment is part of daily maintenance.
(6) Deviation tolerance: The distance from the belt to both sides of the roller should be 5+/-3mm. During operation, it is not possible to ensure that the belt always stays at the center of the aluminum profile.
For the deviation adjustment method, clickhere.
(7) If the direction is opposite to the standard operating direction, belt deviation, belt breakage, noise, jamming, and other abnormalities may occur. Please avoid using it in this way. (The standard transport direction is shown in the figure below)
(2) Due to differences in the operating environment of the conveyor, MISUMI conveyors do not come with a power supply, cable, or switch.
(3) Due to issues with the structural strength and deformation of the machine body, please do not exceed the allowable load or length and width when selecting a model.
(4) The motor is available in two voltage specifications: single-phase 220 V and 3-phase 220 V. Please select the voltage according to your usage requirements.
(5) Belt deviation is a normal phenomenon and does not constitute a quality problem. Deviation adjustment is part of daily maintenance.
(6) Deviation tolerance: The distance from the belt to both sides of the roller should be 5+/-3mm. During operation, it is not possible to ensure that the belt always stays at the center of the aluminum profile.
For the deviation adjustment method, click
here.(7) If the direction is opposite to the standard operating direction, belt deviation, belt breakage, noise, jamming, and other abnormalities may occur. Please avoid using it in this way. (The standard transport direction is shown in the figure below)
Related Documents Click here
here Related product
Basic Information
| Drive Module Position | Head Drive | Belt Type | Flat Belt | Motor Voltage | 220 V |
|---|---|---|---|---|---|
| Max. Mass of Conveyed Material(kg) | 15 | Maximum conveying speed of this series(m/min) | 100 |
Specification/Dimensions
-
Conveyance Length
-
Belt Width/Belt Pitch B(mm)
-
Meandering Prevention
-
With Meandering Prevention Crosspiece -
Pulley crowned for meandering prevention
-
-
Type
- Arc surface roller deviation prevention
- Belt with guide strip for deviation prevention
-
Output Power (W)
-
Specifications
- INV (Three-phase 220 V Inverter Type)
- SCM (Single-phase 220 V Speed Control Type)
- NM (No Motor)
-
Gear Head Reduction Ratio
-
Belt Specifications
-
Motor
- G (GPG Motor)
- J (JSCC Motor)
- R (No Motor · Gear Head)
-
type
- E-SVKA
- E-SVKA4
- E-SVKA57
- E-SVKA86
- E-SVKB
- E-SVKB4
- E-SVKB57
- E-SVKB86
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 15 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can the conveyor's operating direction be set to reverse?
- Answer: The current conveyor does not support reverse operation. If reverse operation is required, please contact customer service for customization.
- Question: Conveyor belt deviation is a product characteristic. How can the frequency of deviation be reduced?
- Answer: The main methods to prevent conveyor belt deviation are arc-shaped rollers and belts with guide strips. Curved rollers are suitable for lengths up to 2000 mm; belts with guide strips are suitable for long distances over 2000 mm.
- Question: If the existing standard models cannot meet your requirements and you need to modify the model but are concerned about debugging issues, do you have any good suggestions?
- Answer: For this situation, please contact customer service for customization to meet your individual needs.
- Question: If I need a stepper motor or a servo motor, can you provide them?
- Answer: You can select a conveyor model without a motor or speed controller and purchase a motor separately for assembly.
Additional Products in this Category
- Flat Belt Conveyor Full Belt Type - Head Drive, 3-Groove Frame
- Flat Belt Conveyor with Backlight, Head Drive, Pulley Dia. 50mm
- Timing Belt Conveyor, Dual Track, Head Driver, Pulley Dia. 50mm, Built-in Motor
- Flat Belt Conveyor, Head driver, Pulley Dia. 50mm
- Belt Conveyor Mini III Knife Edge Type Belt Conveyor DMS
- Belcon Mini Roller Edge Conveyor Belt
- Belgotchi TYPE34 Belt Conveyor for Swayless Models
- Belgotch TYPE34 Joint Model
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy