Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Flat Belt Conveyor, Head Drive, High Load Type, Pulley Dia. 60mm (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

Economy

Check FAQ of this product (4 items)

MISUMI

MiSUMi Economy

MISUMI

Economy series Belt Conveyor

(i)Caution

This single-phase motor is specified for 220V ±10%,50Hz/60Hz. Please ensure it is used within the permissible voltage range.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

Dimensional Drawing

E-CVSD/E-CVSE

Motor specification: 90W^*

Default conveying direction

	When L > 2000, one belt support roller is included. For B < 500, a single guide is used; for B ≥ 500, double guides are used.
	The dimensions shown in the drawing are for belt specification H20 (thickness 2.0 mm). Please note that the belt thickness varies depending on the belt specification.
	Please refer to the flat belt specification list. Click here
	When selecting a speed control motor, the speed controller is supplied as an accessory, is not installed on the main unit, and does not include a mounting bracket.
	If a bracket for the speed controller is required, please use the alteration (SCB).
	The drive side uses chain transmission, and the noise is relatively high during high-speed operation.

*Differences in power only affect the motor size. For the A dimension, please refer to the table below. The external dimensions of the other parts remain the same.

Enlarged view of profile cross-section (left and right symmetrical)
MISUMI belt conveyor manufacturer aluminum profile cross-section aluminium frame

Standard nut allocation table for profile groove: L value (center distance unit: mm)

L550 to 999	L1000 to 1499	L1500 or more	Specification	Configuration Type
16PCS	24PCS	32PCS	M6 (T shape) / E-TNT8-30-6(50)	Accessory

Nuts are shipped with the conveyor as accessories and are not displayed in the CAD model.

Nuts order quantity 1 = 1 pack (50 pcs/pack).

■ A dimension detailed table (speed regulation/inverter motor)

Motor power	Motor		Reduction Ratio	A
	Specification	Manufacturer
60W	Inverter type	GPG	3 to 18	L168
			25 to 180	L186
	Speed regulation type		3 to 18	L179.5
			25 to 180	L197.5
	Inverter type	JSCC	3 to 18	L171
			25 to 180	L191
	Speed regulation type		3 to 18	L182
			25 to 180	L202
90W	Inverter type	GPG	3 to 18	L183
			25 to 180	L201
	Speed regulation type		3 to 18	L194.5
			25 to 180	L212.5
	Inverter type	JSCC	3 to 18	L186
			25 to 180	L206
	Speed regulation type		3 to 18	L197
			25 to 180	L217
120W	Inverter type	GPG	3 to 18	L183
			25 to 180	L201
	Speed regulation type		3 to 18	L194.5
			25 to 180	L212.5
	Inverter type	JSCC	3 to 18	L196
			25 to 180	L216
	Speed regulation type		3 to 18	L207
			25 to 180	L227
200W	Inverter type	GPG	3 to 18	L230
			25 to 180	L230
	Speed regulation type		3 to 18	L240.5
			25 to 180	L240.5
	Inverter type	JSCC	3 to 18	L219
			25 to 180	L243
	Speed regulation type		3 to 18	L231
			25 to 180	L255

■ A dimension detailed table (stepper motor)

Name	Motor Model	A
Leadshine stepper motor (open loop)	86CM45	L80
	86CM80	L98
	86CM120	L129

■ A dimension detailed table (servo motor)

Servo Motor	Supported Motor Specification	A
750W servo motor	Leadshine servo motor	L95.7

■ A dimension detail (planetary reducer)

Gear Ratio (x)	Supported Motor Specification	A
3 5 10	Equipped with a 750W servo motor	L110
15 20 25 30	Equipped with a 750W servo motor	L130
3 5 10	Equipped with an 86 stepper motor	L110
15 20 25 30	Equipped with an 86 stepper motor	L130

When a stepper motor or servo motor is selected and a planetary reducer is configured, the A dimension shown in the diagram is the sum of the motor A dimension and the planetary reducer A dimension.

Specification Overview

■ Material Table

Part Name	Material	Surface Treatment
Profile	Aluminum	Anodized
Motor cover	Aluminum	Spray coating and baking
Pulley holder	Aluminum	Spray coating and baking

■ Flat belt width - pulley center distance correspondence table

Model	Belt Width B	Pulley Center Distance L
Model	Belt Width B	L550 to 600	L605 to 1500	L1505 to 2000	L2005 to 2500	L2505 to 3000
E-CVSD E-CVSE	80 to 200	●	●	●	●	●
	205 to 300	●	●	●	●	●
	305 to 400	●	●	●	●	●
	405 to 500	-	●	●	●	●
	505 to 600	-	-	●	●	●

Specification Table

Please follow the selection procedure

, select the type and parameters, and then proceed with ordering.

	Type	-	Belt Width B	-	Pulley Center Distance L	-	Motor Selection					-	Belt Specification	-	Motor Manufacturer Selection

							Output power	-	Specification	-	Gear Head Reduction Ratio
When there is no pulley When there is no motor or gear head	E-CVSE E-CVSE E-CVSE	- - -	300 300 300	- - -	1500 1500 1500	- - -	60 60 60	- - -	SCM INV NM	- - -	25 25 NH	- - -	H20 J H20	- - -	G G R

■ Specification

Type	Type	Machine Characteristics
E-CVSD	Arc-shaped roller anti-deviation	Good belt flatness and high surface accuracy
E-CVSE	Belt with guide strip for deviation prevention	Belt deviation prevention is stable, but there is a slight bulge at the bonding area of the center guide strip on the flat belt

■ Speed control/inverter type

Type	B Selection Specified unit 5 mm	L Specified unit 5 mm	Motor Selection			Belt Specification (Material is generally PU)	Motor
			Torque (N⋅m) Power (W)	Specification/Drive Method	Gear Head Reduction Ratio
E-CVSD (Arc-shaped roller type) E-CVSE (With guide bar type)	80 to 600	550 to 3000	60 90 120 200 (Power W)	SCM (Single-phase 220 V speed regulation type)	5 7.5 10 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180	H20(General use · green PVC) W20(General use · white PVC) U13(Sliding · green PVC) S13(Sliding · white PVC) D20(Anti-static · green PVC) F15(For food conveying · white PU) O14(Oil-resistant · specification · green PU) Y20(General use · yellow PVC) V20(General use · red PVC) J(Without belt)	G(GPG - Taibang motor) J(JSCC - Jingyan motor)
				INV (3-phase 220 V inverter type)
				NM(without motor)	NH(without gear head)		R(without motor and gear head)

When there is no gear head and the gear head reduction ratio is ≤ 10, the drive side uses timing belt transmission; when the gear head reduction ratio is > 10, the drive side uses chain transmission.

When selecting the INV inverter motor, the inverter is delivered together as an accessory.

■ Stepper type

Type	B Selection Specified unit 5 mm	L Specified unit 5 mm	Motor Selection			Belt Specification (Material is generally PU)	Motor
			Torque (N⋅m) Power (W)	Specification/Drive Method	Gear Head Reduction Ratio
E-CVSD86 (Arc-shaped roller type) E-CVSE86 (with guide strip type)	80 to 600	550 to 3000	4.5 8.0 12.0 (86 stepper type / torque N⋅m)	MC(pulse universal type) IO(IO control type) EC(bus EtherCAT) RS(RS485 communication)	3 5 10 15 20 25 30 NH(without gear head) Caution: 3 to 10 are single pole	H20 (general use · green PVC) W20 (general use · white PVC) U13 (sliding · green PVC) S13 (sliding · white PVC) D20 (anti-static · green PVC) F15 (for food conveyance · white PU) O14 (oil-resistant · specification · green PU) Y20 (general use · yellow PVC) V20 (general use · red PVC) J (without belt)	LS (Leadshine motor)
				NM (without motor and driver)			R (without motor, driver, and gear head)

When using an 86 stepper with a torque of 4.5 N⋅m, the driver supports an input voltage of 48 V DC. (Power supply not included)

When using an 86 stepper with a torque of 8.0 N⋅m or 12.0 N⋅m, the driver supports an input voltage of 24 V DC to 70 V DC or 48 V AC to 70 V AC, two types of power supply voltage. (Power supply not included)

The drive side uses timing belt transmission.

■ Servo type

Type	B Selection Specified unit 5 mm	L Specified unit 5 mm	Motor Selection			Belt Specification (Material is generally PU)	Motor
			Torque (N⋅m) Power (W)	Specification/Drive Method	Gear Head Reduction Ratio
E-CVSD75 (Arc-shaped roller type) E-CVSE75 (with guide strip type)	80 to 600	550 to 3000	750 (servo type power W)	MC(pulse universal type) EC(Bus EtherCAT)	3 5 10 15 20 25 30 NH(without gear head) Caution: 3 to 10 are single pole	H20(general use · green PVC) W20(general use · white PVC) U13(sliding · green PVC) S13(sliding · white PVC) D20(anti-static · green PVC) F15(for food conveying · white PU) O14(oil-resistant · specification · green PU) Y20(general use · yellow PVC) V20(general use · red PVC) J(no belt)	LS (Leadshine motor)
				NM(No motor · drive)			R(without motor, drive, or gear head)

When a servo motor is selected, the motor and driver are supplied by default with a single-phase 220 V power supply. In conveyor applications, a motor rated speed of 3000 r/min is used as the standard for linear speed calculation. During use, control can be customized through host computer programming.

The drive side uses timing belt transmission.

The belt thickness is the nominal thickness; the actual thickness is one-tenth of this value, with the unit in mm.

For oil resistance specifications, only the transmission surface is oil resistant. If oil gets on the back of the belt, it may become unusable.

When selecting without motor and without gear head, the motor installation hole pitch will vary depending on the motor output power.

When selecting without motor and without gear head, the main unit will be delivered as parts. Please assemble by the customer according to the assembly procedure instruction manual included in the same package.

For belts other than those above, please refer to the specification overview by clicking

here.

Table 1: Deceleration head reduction ratio & transmission capacity (speed regulation/inverter motor)

■ Transmission capacity
MISUMI belt conveyor load capacity

Test motor: JSCC (J) timing pulley transmission ratio 1.2:1
Belt width: B = 600 mm, thickness 2.0 mm Roller center distance: L = 3000 mm

■ Deceleration head reduction ratio-speed correspondence table

INV inverter type: Reference value for flat belt speed when the motor speed is 1300 rpm (50 Hz).

*Reference value

Gear Head Reduction Ratio	Flat Belt Speed (m/min)
Gear Head Reduction Ratio	SCM speed regulation type	INV inverter type
5	38.0 to 61.0	35.3 to 58.8
7.5	25.3 to 42.2	23.5 to 39.2
10	19.0 to 31.7	17.6 to 29.4
12.5	15.2 to 25.3	14.1 to 23.5
15	12.7 to 21.1	11.8 to 19.6
18	10.6 to 17.6	9.8 to 16.3
25	7.6 to 12.7	7.1 to 11.8
30	6.3 to 10.6	5.9 to 9.8
36	5.3 to 8.8	4.9 to 8.2
50	3.8 to 6.3	3.5 to 5.9
60	3.2 to 5.3	2.9 to 4.9
75	2.5 to 4.2	2.4 to 3.9
90	2.1 to 3.5	2.0 to 3.3
100	1.9 to 3.2	1.8 to 2.9
120	1.6 to 2.6	1.5 to 2.4
150	1.3 to 2.1	1.2 to 2.0
180	1.1 to 1.8	1.0 to 1.6

May decrease depending on the load state

Table 2: Correspondence between load and linear speed (stepper motor)

*Reference value

Speed (rpm)	Gear Head Reduction Ratio	Recommended Max. linear speed (m/min)	Voltage 48 V DC (current 6 A)
			86CM45	86CM80	86CM120
			Load (kg)
100	NH	18.8	/	1.5	2.5
150	NH	28.3	/	0.5	1
200	3	12.6	8	19	23
	5	7.5	30	55	70
	10	3.8	95	100	100
	15	2.5	100	100	100
	20	1.9	100	100	100
	25	1.5	100	100	100
	30	1.3	100	100	100

Test motor: Leadshine (LS) timing pulley transmission ratio 1:1
Belt width: B=400 mm, thickness 2.0 mm Roller center distance: L=1000 mm

Table 3: Correspondence table of load and linear speed (servo motor)

*Reference value

Speed (rpm)	Gear Head Reduction Ratio	Recommended Max. linear speed (m/min)	Voltage 220 V AC
			750W
			Load (kg)
3000	NH	/	/
	3	120	25
	5	113	45
	10	56.5	90
	15	37.7	100
	20	28.3	100
	25	22.6	100
	30	18.8	100

Test motor: Leadshine (LS) synchronous pulley with transmission ratio 1:1
Belt width: B = 400 mm, thickness 2.0 mm Roller center distance: L = 1000 mm

Alterations

Type	-	Belt Width B	-	Pulley Center Distance L	-	Motor Selection					-	Belt Specification	-	Motor Manufacturer Selection	-	Alteration

						Output Power	-	Specification	-	Gear Head Reduction Ratio
E-CVSE	-	300	-	1500	-	60	-	SCM	-	25	-	H20	-	G	-	MK

Alterations

Code

Spec

Reverse motor installation position

MISUMI belt conveyor alteration motor position change

The motor installation position can be changed.
Ordering code MK
Can only be specified for head drive type.

Mounting bracket for speed controller

MISUMI belt conveyor speed regulator bracket alteration

SCB

Comes with a mounting bracket for the speed controller.
Ordering code SCB

Conveyor belt reverse conveyance

Reverse conveyance.
Ordering code FX

Conveyor belt bidirectional conveyance

Only supports models with guide strips

Bidirectional conveyance.
Ordering codeSX

Additional quantity of profile nuts in the profile groove

Select only when the standard quantity is insufficient (see dimensional drawing information for standard quantity and specification)

ANQ

Additional quantity of nuts in the profile groove.
Ordering codeANQ5

Code	Quantity (pcs)	Configuration type
ANQ	5 to 10	Accessory

Product Features

Feature 1: The conveyor body uses an aluminum profile, achieving an overall lightweight design.
Feature 2: The universal European standard 3060 profile makes it easy to assemble profile brackets and is widely used in logistics lines.
Feature 3: The conveyor belt roller pitch has a wide selection range, can be specified in 5 mm increments, with a maximum pitch of up to 3 meters.

Precautions

(1) Do not disassemble or modify the conveyor by yourself to avoid causing performance defects.
(2) Due to differences in the operating environment of the conveyor, MISUMI conveyors do not come with a power supply, cable, or switch.
(3) Due to issues with the structural strength and deformation of the machine body, please do not exceed the allowable load or length and width when selecting a model.
(4) The motor is available in two voltage specifications: single-phase 220 V and 3-phase 220 V. Please select the voltage according to your usage requirements.
(5) Belt deviation is a normal phenomenon and does not constitute a quality problem. Deviation adjustment is part of daily maintenance. For the deviation adjustment method, click

here.
(6) Deviation tolerance: The distance from the belt to both sides of the roller should be 5+/-3mm. During operation, it is not possible to ensure that the belt always stays at the center of the aluminum profile.
(7) If the direction is opposite to the standard operating direction, belt deviation, belt breakage, noise, jamming, and other abnormalities may occur. Please avoid using it in this way. (The standard transport direction is shown in the figure below)
MISUMI belt conveyor standard conveying direction

MISUMI belt conveyor standard conveying direction

Application Industries

Equipment Production	Semiconductor	Lithium Battery

Food	Electronic & Electrical	Robot

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number

Part Number	Minimum order quantity	Volume Discount	Days to Ship	Conveyance Length (mm)	Belt Width/Belt Pitch B (mm)	Meandering Prevention	Motor Voltage	Tail Roller Dia. D (Tail Transfer Part R) (mm)	Reverse Switch Option	Type	Output Power/Torque (W/N⋅m)	Specification/Drive Method	Gear Head Reduction Ratio	Belt Specifications	Motor

Basic Information

Drive Module Position	Head Drive	Belt Type	Flat Belt	Max. Mass of Conveyed Material(kg)	100
Drive Roller Dia.(mm)	60	Maximum Conveying Speed(m/min)	120

Configure

80 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Conveyance Length (mm)
[550-3000/5]
Clear
Belt Width/Belt Pitch B(mm)
[80-600/10mm Unit(s)][80-600/5mm Unit(s)]
Clear
Meandering Prevention
- With Meandering Prevention Crosspiece
- Pulley crowned for meandering prevention
Clear
Motor Voltage
- Single-phase 200 V
- 220 V
Clear
Tail Roller Dia. D (Tail Transfer Part R)(mm)
30

60
Clear
Reverse Switch Option
- Not Provided
Clear
Type
- Arc-shaped roller anti-deviation
- Belt with guide strip for deviation prevention
Clear
Output Power/Torque (W/N⋅m)
4.5 (Stepper type)

8.0 (Stepper type)

12.0 (Stepper type)

60 (Speed control/inverter type)

90 (Speed control/inverter type)

120 (Speed control/inverter type)

200 (Speed control/inverter type)

750 (Servo type)
Clear
Specification/Drive Method
- INV (Three-phase 220 V Inverter Type)
- SCM (Single-phase 220 V Speed Control Type)
- RS (RS485 communication)
- EC (Bus EtherCAT)
- IO (IO control type)
- MC (Pulse universal type)
- NM (No Motor)
Clear
Gear Head Reduction Ratio
3

5

7.5

10

12.5

15

18

20

25

30

36

50

60

75

90

100

120

150

180

NH (Gearless Head)
Clear
Belt Specifications
- Anti-static · Green PVC
- For Food Conveyance · White PU
- For Sliding · Green PVC
- For Sliding · White PVC
- General Purpose · White PVC
- General Use · Green PVC
- General Use · Red PVC
- General Use · Yellow PVC
- No belt
- Oil-resistant Type · Green PU
Clear
Motor
- G (GPG Motor)
- J (JSCC Motor)
- R (No Motor · Gear Head)
- [LS] Leadshine Motor
Clear
type
- E-CVSD
- E-CVSD75
- E-CVSD86
- E-CVSE
- E-CVSE75
- E-CVSE86
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

13 Day(s) or Less

17 Day(s) or Less

20 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Can the conveyor's operating direction be set to reverse?: Answer: The current conveyor does not support reverse operation. If reverse operation is required, please contact customer service for customization.
Question: Conveyor belt deviation is a product characteristic. How can the frequency of deviation be reduced?: Answer: The main methods to prevent conveyor belt deviation are arc-shaped rollers and belts with guide strips. Curved rollers are suitable for lengths up to 2000 mm; belts with guide strips are suitable for long distances over 2000 mm.
Question: If the existing standard models cannot meet your requirements and you need to modify the model but are concerned about debugging issues, do you have any good suggestions?: Answer: For this situation, please contact customer service for customization to meet your individual needs.
Question: If I need a stepper motor or a servo motor, can you provide them?: Answer: You can select a conveyor model without a motor or speed controller and purchase a motor separately for assembly.

Check other FAQ (1 items) Hide

Additional Products in this Category

Tech Support

: Technical Inquiry

Economy flat belt conveyor head drive Pulley diameter 80 mm high output type	Economy flat belt conveyor built-in motor drive Pulley diameter 70 mm	Economy double-row timing belt conveyor head drive Pulley diameter 70 mm high output type

Representative model: E-CVSG	Representative model: E-CVSMA	Representative model: E-CVGTC

(1) Motor wiring method
(2) Flat belt specification list
(3) Deviation adjustment method
(4) Conveyor body weight

How can we improve?

Flat Belt Conveyor, Head Drive, High Load Type, Pulley Dia. 60mm (Part Numbers)

(i)Caution

Part Number

Basic Information

Configure

Specification/Dimensions

Conveyance Length (mm)

Belt Width/Belt Pitch B(mm)

Meandering Prevention

Motor Voltage

Tail Roller Dia. D (Tail Transfer Part R)(mm)

Reverse Switch Option

Type

Output Power/Torque (W/N⋅m)

Specification/Drive Method

Gear Head Reduction Ratio

Belt Specifications

Motor

type

CAD

Days to Ship

Specify Alterations

Frequently asked question (FAQ)

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm