(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Bearings with Housings, Single Bearing, Standard Flange Type without Retainer Ring (Part Numbers)
- Volume Discount
Part Number
Configured Part Number is shown.
It supports and fixes the bearing of the load carrying shaft. The bearing can be accurately and conveniently assembled onto the mechanism using the holder.
For the type without a retaining ring, since dimension B has a negative tolerance, the bearing may protrude by 0.1 to 0.2 mm Bearings without a retaining ring may fall out, but can be used normally after reinstallation Threading and countersinking the mounting hole allows installation from both sides| Type |  Material |  Surface Treatment | |||
| Round | Square Type | Compact Type | Bearing | Holder | Holder |
| E-LBGRNB | E-LBGSNB | E-LBGCNB | Steel | S45C | Black Oxide Film |
| E-LBGRN | E-LBGSN | E-LBGCN | Electroless Nickel Plating | ||
| E-LBARN | E-LBASN | E-LBACN | Aluminum | Clear Anodized | |
| E-LSBARN | E-LSBASN | E-LSBACN | Stainless Steel | ||
| E-LSBGRN | E-LSBGSN | E-LSBGCN | SUS304 | - | |
| Alterations | Without bearings, retaining rings | ||||||
| Code | NA | ||||||
| Spec. | Bearings and retaining rings are not installed in the housing, but are shipped as accessories. | ||||||
Specifications & Dimensions Table
| Part Number | d | DH7 | B | H | W | T | dh | P.C.D. | K | A | F | M (Coarse Thread) (d2) | d1 | H1 | |||
| Type | Bearing Part Number | Bearing Cover Type | Tolerance | ||||||||||||||
| Round E-LBGRNB E-LBGRN E-LBARN E-LSBARN E-LSBGRN Square E-LBGSNB E-LBGSN E-LBASN E-LSBASN E-LSBGSN Compact E-LBGCNB E-LBGCN E-LBACN E-LSBACN E-LSBGCN | 623 | ZZ Double Shield Type VV Non-contact Rubber Seal DD Contact Rubber Seal Ring | 3 | 10 | +0.015 0 | 4 | 33 | 16 | 6 | 7 | 24 | 27 | 24 | - | M4 (3.3) | 6.5 | 3.4 |
| 624 | 4 | 13 | +0.018 0 | 5 | 35 | 18 | 7 | 9 | 26 | 28 | 26 | ||||||
| 605 | 5 | 14 | 5 | 36 | 20 | 7 | 10 | 26 | 30 | 26 | M5 (4.3) | 8 | 4.4 | ||||
| 625 | 16 | 5 | 38 | 22 | 7 | 12 | 28 | 31 | 28 | ||||||||
| 606 | 6 | 17 | 6 | 39 | 23 | 8 | 13 | 29 | 32 | 29 | |||||||
| 626 | 19 | +0.021 0 | 6 | 41 | 25 | 8 | 15 | 31 | 34 | 31 | |||||||
| 678 | 8 | 12 | +0.018 0 | 3.5 | 34 | 18 | 6 | 10 | 25 | 27 | 25 | M4 (3.3) | 6.5 | 3.4 | |||
| 698 | 19 | +0.021 0 | 6 | 41 | 25 | 8 | 15 | 31 | 34 | 31 | M5 (4.3) | 8 | 4.4 | ||||
| 608 | 22 | 7 | 45 | 29 | 9 | 18 | 35 | 36 | 35 | ||||||||
| 628 | 24 | 8 | 47 | 32 | 10 | 20 | 37 | 37 | 37 | ||||||||
| 6700 | 10 | 15 | +0.018 0 | 4 | 37 | 22 | 7.5 | 12 | 27 | 30 | 27 | ||||||
| 6800 | 19 | +0.021 0 | 5 | 41 | 25 | 7.5 | 15 | 31 | 34 | 31 | |||||||
| 6900 | 22 | 6 | 45 | 29 | 8 | 19 | 35 | 36 | 35 | ||||||||
| 6000 | 26 | 8 | 50 | 34 | 10 | 22 | 40 | 39 | 40 | ||||||||
| 6200 | 30 | 9 | 54 | 38 | 11 | 24 | 44 | 42 | 44 | ||||||||
| 6701 | 12 | 18 | +0.018 0 | 4 | 40 | 25 | 7.5 | 15 | 30 | 31 | 30 | ||||||
| 6801 | 21 | +0.021 0 | 5 | 44 | 29 | 7.5 | 17 | 34 | 35 | 34 | |||||||
| 6901 | 24 | 6 | 48 | 31 | 8 | 21 | 38 | 38 | 38 | ||||||||
| 6001 | 28 | 8 | 52 | 36 | 10 | 24 | 42 | 40 | 42 | ||||||||
| 6201 | 32 | +0.025 0 | 10 | 56 | 40 | 12 | 26 | 46 | 43 | 46 | |||||||
| 6702 | 15 | 21 | +0.021 0 | 4 | 44 | 29 | 7.5 | 18 | 34 | 35 | 34 | ||||||
| 6802 | 24 | 5 | 47 | 32 | 7.5 | 20 | 37 | 37 | 37 | ||||||||
| 6902 | 28 | 7 | 57 | 37 | 9 | 25 | 45 | 45 | 45 | M6 (5.2) | 9.5 | 5.4 | |||||
| 6002 | 32 | +0.025 0 | 9 | 60 | 40 | 11 | 28 | 48 | 46 | 48 | |||||||
| 6202 | 35 | 11 | 64 | 44 | 13 | 29 | 52 | 49 | 52 | ||||||||
| 6803 | 17 | 26 | +0.021 0 | 5 | 50 | 34 | 7.5 | 22 | 40 | 39 | 40 | M5 (4.3) | 8 | 4.4 | |||
| 6903 | 30 | 7 | 60 | 38 | 9 | 27 | 48 | 46 | 48 | M6 (5.2) | 9.5 | 5.4 | |||||
| 6003 | 35 | +0.025 0 | 10 | 66 | 44 | 12 | 31 | 54 | 50 | 54 | |||||||
| 6203 | 40 | 12 | 72 | 50 | 14 | 34 | 60 | 54 | 60 | ||||||||
| 6704 | 20 | 27 | +0.021 0 | 4 | 51 | 35 | 7.5 | 23 | 41 | 39 | 32 | 25 | M5 (4.3) | 8 | 4.4 | ||
| 6804 | 32 | +0.025 0 | 7 | 60 | 40 | 9 | 28 | 48 | 46 | 38 | 29 | M6 (5.2) | 9.5 | 5.4 | |||
| 6904 | 37 | 9 | 69 | 47 | 11 | 34 | 56 | 54 | 51 | 24 | M8 (6.8) | 11 | 6.5 | ||||
| 6004 | 42 | 12 | 77 | 54 | 14 | 36 | 64 | 59 | 56 | 32 | |||||||
| 6204 | 47 | 14 | 81 | 58 | 16 | 40 | 68 | 62 | 59 | 34 | |||||||
| 6805 | 25 | 37 | 7 | 69 | 47 | 11 | 34 | 56 | 54 | 51 | 24 | ||||||
| 6905 | 42 | 9 | 77 | 54 | 11 | 36 | 64 | 59 | 56 | 32 | |||||||
| 6005 | 47 | 12 | 88 | 58 | 14 | 41 | 72 | 67 | 63 | 36 | M10 (8.5) | 14 | 8.6 | ||||
| 6205 | 52 | +0.030 0 | 15 | 94 | 64 | 17 | 45 | 78 | 72 | 68 | 39 | ||||||
| 6806 | 30 | 42 | +0.025 0 | 7 | 77 | 54 | 11 | 36 | 64 | 59 | 56 | 32 | M8 (6.8) | 11 | 6.5 | ||
| 6906 | 47 | 9 | 88 | 58 | 13 | 41 | 72 | 67 | 63 | 36 | M10 (8.5) | 14 | 8.6 | ||||
| 6006 | 55 | +0.030 0 | 13 | 96 | 66 | 15 | 48 | 80 | 73 | 70 | 40 | ||||||
| 6206 | 62 | 16 | 104 | 74 | 18 | 55 | 88 | 79 | 77 | 44 | |||||||
| 6007 | 35 | 14 | 16 | 75 | |||||||||||||
| 6207 | 72 | 17 | 126 | 88 | 21 | 64 | 105 | 95 | 92 | 51 | M12 (10.5) | 17.5 | 11 | ||||
| 6008 | 40 | 68 | 15 | 114 | 82 | 17 | 60 | 96 | 86 | 80 | 54 | M10 (8.5) | 14 | 8.6 | |||
| 6208 | 80 | 18 | 134 | 96 | 22 | 74 | 113 | 102 | 98 | 56 | M12 (10.5) | 17.5 | 11 | ||||
| 6010 | ZZ Double Shield Type | 50 | 16 | 20 | - | ||||||||||||
| 6210 | 90 | +0.035 0 | 20 | 147 | 110 | 24 | 83 | 126 | 104 | 72 | |||||||
VV (non-contact rubber seal) is not applicable for bearings with model numbers 623, 624, 605, and 606.Feature 1: The round bearing housing assembly is suitable for locations requiring high-precision rotation.
Feature 2: The end is inserted into a G7 precision hole on the fixed plate for positioning and installation, providing high repeatability in positioning during maintenance.
Feature 3: The single bearing type bearing housing assembly occupies less space and is suitable for areas with limited space.
Feature 4: The bearing housing assembly has high perpendicularity and coaxiality, making precise positioning during installation easier.
| Mounting method of bearing housing set | Detailed explanation of installation |
 | When mounting standard bearing housing set, counterbored hole or thread hole are used so that they can be mounted from both sides. |
 | Accurate positioning can be achieved by aligning the machined holes with H7 tolerance on the mounting surface when the guided bearing housing set is installed. |
| Precautions | Illustration and Reference |
| Anti-rust performance and maintenance of metal materials and surface treatment. | For detailed rust prevention performance and maintenance, please refer to the technical documentation. |
| Bearing accuracy for bearing housing assembly: GB/T 307.1 Class 0 (equivalent to JIS B 1514 Class 0) When selecting mating parts, please choose products with negative tolerance. | For detailed bearing specifications, please refer to the technical documentation. |
| When selecting, please note that axial clearance exists between the bearing and the retaining ring. Axial direction: The direction along the rotational central axis of cylinder, which is the same direction as the central axis. (Blue direction shown on the right) Radial direction: perpendicular to the axial direction, which is the radius or diameter direction of the end face circle of the cylinder. (Red direction shown on the right) |  |
| The retaining ring in the bearing housing set with retaining ring cannot be fastened axially, and it only plays a role in preventing the bearing from falling off. If you need to tighten the bearing axially, it is recommended to use a retaining ring, nut, etc. When choosing a fixing ring, nut, etc. for axial tightening, please take care to avoid the retaining ring. Please refer to the product specifications for retaining ring dimensions. |  |
Feature 1: A mechanism that uses a pneumatic chuck to flip and transfer the held workpiece.
Feature 2: The bearing housing set is used in a simple cam shape, which can flip over the workpiece while sliding, thereby changing the direction of the workpiece.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| E-LSBARN6803ZZ |
| E-LSBARN6804ZZ |
| E-LSBARN6805ZZ |
| E-LSBARN6806ZZ |
| E-LSBARN6900ZZ |
| E-LSBARN6901ZZ |
| E-LSBARN6902ZZ |
| E-LSBARN6903ZZ |
| E-LSBARN6904ZZ |
| E-LSBARN6905ZZ |
| E-LSBARN6906ZZ |
| E-LSBARN698ZZ |
| E-LSBGRN6000ZZ |
| E-LSBGRN6001ZZ |
| E-LSBGRN6002ZZ |
| E-LSBGRN6003ZZ |
| E-LSBGRN6004ZZ |
| E-LSBGRN6005ZZ |
| E-LSBGRN6006ZZ |
| E-LSBGRN6007ZZ |
| E-LSBGRN6008ZZ |
| E-LSBGRN6010ZZ |
| E-LSBGRN605ZZ |
| E-LSBGRN606ZZ |
| E-LSBGRN608ZZ |
| E-LSBGRN6200ZZ |
| E-LSBGRN6201ZZ |
| E-LSBGRN6202ZZ |
| E-LSBGRN6203ZZ |
| E-LSBGRN6204ZZ |
| E-LSBGRN6205ZZ |
| E-LSBGRN6206ZZ |
| E-LSBGRN6207ZZ |
| E-LSBGRN6208ZZ |
| E-LSBGRN6210ZZ |
| E-LSBGRN623ZZ |
| E-LSBGRN624ZZ |
| E-LSBGRN625ZZ |
| E-LSBGRN626ZZ |
| E-LSBGRN628ZZ |
| E-LSBGRN6700ZZ |
| E-LSBGRN6701ZZ |
| E-LSBGRN6702ZZ |
| E-LSBGRN6704ZZ |
| E-LSBGRN678ZZ |
| E-LSBGRN6800ZZ |
| E-LSBGRN6801ZZ |
| E-LSBGRN6802ZZ |
| E-LSBGRN6803ZZ |
| E-LSBGRN6804ZZ |
| E-LSBGRN6805ZZ |
| E-LSBGRN6806ZZ |
| E-LSBGRN6900ZZ |
| E-LSBGRN6901ZZ |
| E-LSBGRN6902ZZ |
| E-LSBGRN6903ZZ |
| E-LSBGRN6904ZZ |
| E-LSBGRN6905ZZ |
| E-LSBGRN6906ZZ |
| E-LSBGRN698ZZ |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Bearing Inner Dia. d (mm) | Flange Shape 1 | Bearing Material | Housing Material | Housing Surface Treatment | Bearing Part Number |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 34.97 | 1 Piece(s) | Available | 13 Day(s) or more | 17 | Round Type | Stainless Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6803 | |
MYR 41.32 | 1 Piece(s) | Available | 13 Day(s) or more | 20 | Round Type | Stainless Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6804 | |
MYR 54.06 | 1 Piece(s) | Available | 13 Day(s) or more | 25 | Round Type | Stainless Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6805 | |
MYR 65.18 | 1 Piece(s) | Available | 13 Day(s) or more | 30 | Round Type | Stainless Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6806 | |
MYR 28.88 | 1 Piece(s) | Available | 13 Day(s) or more | 10 | Round Type | Stainless Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6900 | |
MYR 30.68 | 1 Piece(s) | Available | 13 Day(s) or more | 12 | Round Type | Stainless Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6901 | |
MYR 35.04 | 1 Piece(s) | Available | 13 Day(s) or more | 15 | Round Type | Stainless Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6902 | |
MYR 39.64 | 1 Piece(s) | Available | 13 Day(s) or more | 17 | Round Type | Stainless Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6903 | |
MYR 47.34 | 1 Piece(s) | Available | 13 Day(s) or more | 20 | Round Type | Stainless Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6904 | |
MYR 57.85 | 1 Piece(s) | Available | 13 Day(s) or more | 25 | Round Type | Stainless Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6905 | |
MYR 72.43 | 1 Piece(s) | Available | 13 Day(s) or more | 30 | Round Type | Stainless Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6906 | |
MYR 24.82 | 1 Piece(s) | Available | 13 Day(s) or more | 8 | Round Type | Stainless Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 698 | |
MYR 63.81 | 1 Piece(s) | Available | 13 Day(s) or more | 10 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6000 | |
MYR 68.50 | 1 Piece(s) | Available | 13 Day(s) or more | 12 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6001 | |
MYR 80.97 | 1 Piece(s) | Available | 13 Day(s) or more | 15 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6002 | |
MYR 96.45 | 1 Piece(s) | Available | 13 Day(s) or more | 17 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6003 | |
MYR 123.08 | 1 Piece(s) | Available | 13 Day(s) or more | 20 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6004 | |
MYR 146.55 | 1 Piece(s) | Available | 13 Day(s) or more | 25 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6005 | |
MYR 174.91 | 1 Piece(s) | Available | 13 Day(s) or more | 30 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6006 | |
MYR 205.10 | 1 Piece(s) | Available | 13 Day(s) or more | 35 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6007 | |
MYR 239.26 | 1 Piece(s) | Available | 13 Day(s) or more | 40 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6008 | |
MYR 367.58 | 1 Piece(s) | Available | 13 Day(s) or more | 50 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6010 | |
MYR 41.39 | 1 Piece(s) | Available | 13 Day(s) or more | 5 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 605 | |
MYR 45.83 | 1 Piece(s) | Available | 13 Day(s) or more | 6 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 606 | |
MYR 53.56 | 1 Piece(s) | Available | 13 Day(s) or more | 8 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 608 | |
MYR 74.09 | 1 Piece(s) | Available | 13 Day(s) or more | 10 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6200 | |
MYR 80.31 | 1 Piece(s) | Available | 13 Day(s) or more | 12 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6201 | |
MYR 89.99 | 1 Piece(s) | Available | 13 Day(s) or more | 15 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6202 | |
MYR 117.84 | 1 Piece(s) | Available | 13 Day(s) or more | 17 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6203 | |
MYR 145.28 | 1 Piece(s) | Available | 13 Day(s) or more | 20 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6204 | |
MYR 183.49 | 1 Piece(s) | Available | 13 Day(s) or more | 25 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6205 | |
MYR 213.91 | 1 Piece(s) | Available | 13 Day(s) or more | 30 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6206 | |
MYR 338.83 | 1 Piece(s) | Available | 13 Day(s) or more | 35 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6207 | |
MYR 380.28 | 1 Piece(s) | Available | 13 Day(s) or more | 40 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6208 | |
MYR 489.09 | 1 Piece(s) | Available | 13 Day(s) or more | 50 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6210 | |
MYR 38.14 | 1 Piece(s) | Available | 13 Day(s) or more | 3 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 623 | |
MYR 41.11 | 1 Piece(s) | Available | 13 Day(s) or more | 4 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 624 | |
MYR 42.34 | 1 Piece(s) | Available | 13 Day(s) or more | 5 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 625 | |
MYR 47.96 | 1 Piece(s) | Available | 13 Day(s) or more | 6 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 626 | |
MYR 60.60 | 1 Piece(s) | Available | 13 Day(s) or more | 8 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 628 | |
MYR 45.61 | 1 Piece(s) | Available | 13 Day(s) or more | 10 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6700 | |
MYR 48.55 | 1 Piece(s) | Available | 13 Day(s) or more | 12 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6701 | |
MYR 54.25 | 1 Piece(s) | Available | 13 Day(s) or more | 15 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6702 | |
MYR 62.90 | 1 Piece(s) | Available | 13 Day(s) or more | 20 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6704 | |
MYR 38.05 | 1 Piece(s) | Available | 13 Day(s) or more | 8 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 678 | |
MYR 49.57 | 1 Piece(s) | Available | 13 Day(s) or more | 10 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6800 | |
MYR 52.68 | 1 Piece(s) | Available | 13 Day(s) or more | 12 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6801 | |
MYR 56.41 | 1 Piece(s) | Available | 13 Day(s) or more | 15 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6802 | |
MYR 61.45 | 1 Piece(s) | Available | 13 Day(s) or more | 17 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6803 | |
MYR 77.30 | 1 Piece(s) | Available | 13 Day(s) or more | 20 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6804 | |
MYR 101.96 | 1 Piece(s) | Available | 13 Day(s) or more | 25 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6805 | |
MYR 120.14 | 1 Piece(s) | Available | 13 Day(s) or more | 30 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6806 | |
MYR 54.41 | 1 Piece(s) | Available | 13 Day(s) or more | 10 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6900 | |
MYR 57.85 | 1 Piece(s) | Available | 13 Day(s) or more | 12 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6901 | |
MYR 68.92 | 1 Piece(s) | Available | 13 Day(s) or more | 15 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6902 | |
MYR 75.77 | 1 Piece(s) | Available | 13 Day(s) or more | 17 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6903 | |
MYR 95.22 | 1 Piece(s) | Available | 13 Day(s) or more | 20 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6904 | |
MYR 112.79 | 1 Piece(s) | Available | 13 Day(s) or more | 25 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6905 | |
MYR 144.33 | 1 Piece(s) | Available | 13 Day(s) or more | 30 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 6906 | |
MYR 47.96 | 1 Piece(s) | Available | 13 Day(s) or more | 8 | Round Type | Stainless Steel | [SUS304] SUS304 | Not Provided | 698 |
Loading...
Basic Information
| Shape | Flanged | Bearing Used | Deep Groove Ball Bearing | Number of Bearings | Single |
|---|---|---|---|---|---|
| Retaining Ring | Not Provided | Type | Bearing with Housings | Seal | ZZ (Double Shield) |
Specification/Dimensions
-
Bearing Inner Dia. d(mm)
-
Bearing Material
- Steel
- Stainless Steel
- Steel
-
Housing Material
- S45C
- SUS304
- A2017
- S45C
-
Housing Surface Treatment
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize Processing
- Not Provided
-
Bearing Part Number
-
type
- E-LBACN
- E-LBARN
- E-LBASN
- E-LBGCN
- E-LBGCNB
- E-LBGRN
- E-LBGRNB
- E-LBGSN
- E-LBGSNB
- E-LSBACN
- E-LSBARN
- E-LSBASN
- E-LSBGCN
- E-LSBGRN
- E-LSBGSN
-
Flange Shape 1
- Round Type
- Square Type
- Compact
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 13 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What is the bearing housing set?
- Answer: It supports and fixes the bearing of the load carrying shaft. The bearing can be accurately and simply assembled onto the mechanism using the holder.
- Question: What do radial load and axial load mean?
-
Answer:
The load applied to the shaft along the perpendicular direction of the shaft center line - radial load.
The load applied to the shaft along the horizontal direction of the shaft center line - axial load (thrust load). - Question: After the rotating shaft is assembled with the bearing housing set, there is obvious axial movement. How to solve the problem?
-
Answer:
If you need to tighten the bearing axially, it is recommended to use a retaining ring, nut, etc. Please refer to the installation method.
When choosing a fixing ring, nut, etc. for axial tightening, please take care to avoid the retaining ring. For ring dimensions, please refer to the product specifications. - Question: For high-load service service conditions, which type of bearing housing set is a better choice?
- Answer: Double bearing type bearing housing set is suitable for heavy load operating environment, and keep fixed for transmission products such as rotating shaft.
- Question: What tolerance should be selected for shaft parts used with bearing housing set?
- Answer: It is recommended to choose MISUMI brand rotating shafts with g6 tolerance.
Additional Products in this Category
- Bearings with Housings - Double Bearings, Non-Retained, L Selectable
- Bearings with Housings - Double Bearings with Pilot, Non-Retained, L Selectable
- Bearings with Housings - Space Saving, Small Flanged, Non-Retained
- Bearings with Housings - T-Shaped, Double Bearings, High Configurable
- Bearings with Housings, Double Bearing, Flange Type, without Retainer Ring
- Ball Bearing Unit Pilot Type (BSRN)
- Ball Bearing Unit Standard Type (BRSN)
- Foot mounting, HPC Series
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy