(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Spring Plungers Micro, Standard (E-LMPJL4-3)
- Volume Discount
- RoHS
Part Number
Configured Part Number is shown.
E-LMPJL4-3
The spring plunger is also known as the positioning column, ball screw, spring screw, etc. It is a product involving vertical stroke, in which the front pin is pressed till the pin sinks into the body and then the front pin can be ejected through the built-in spring. It can be used in mold release, workpiece lifting and positioning, etc., which can be widely applied in medium and low-precision mechanical devices, fixtures, molds, automation machines, etc.
Material Specification
| Load Classification | Tybe | Body | Pin | Spring | ||
| Flat Head | Spherical | Cone Head R |  Material | Material | Material | |
| Light Load | E-LMPFL | E-LMPJL | E-LMPTL | SUS303 | SUS304 | SUS304 |
| Heavy Load | E-LMPFH | E-LMPJH | - | |||
| Part Number | S | d | D1 | L | C | R | Light Load | Heavy Load | |||
| Type | Dh7 | Load (N) | Load (N) | ||||||||
| min. | max. | min. | max. | ||||||||
| (Flat Head) E-LMPFL E-LMPFH (Spherical) E-LMPJL E-LMPJH (Cone Head R) E-LMPTL | 2 | 1.5 | 1 | 2.5 | 16 | 0.1 | 0.3 | 0.49 | 0.98 | 1.96 | 3.92 |
| 3 | 26 | 0.49 | 0.98 | 1.67 | 3.73 | ||||||
| 3 | 3 | 2 | 3.5 | 16 | 0.2 | 0.5 | 0.49 | 1.47 | 2.45 | 3.92 | |
| 6 | 26 | 0.49 | 1.47 | 2.26 | 3.73 | ||||||
| 4 | 3 | 3 | 4.5 | 15 | 0.2 | 1 | 0.59 | 1.47 | 3.43 | 5.3 | |
| 6 | 20 | 0.49 | 2.06 | 2.45 | 5.3 | ||||||
| 9 | 32 | 0.69 | 3.92 | 2.94 | 6.47 | ||||||
| 5 | 4 | 4 | 5.5 | 17 | 0.3 | 1.5 | 0.64 | 1.96 | 3.73 | 6.96 | |
| 8 | 24 | 0.78 | 3.82 | 3.04 | 7.06 | ||||||
| 12 | 32 | 0.83 | 5.79 | 2.75 | 7.06 | ||||||
♢ It is made of all stainless steel without painting and coloring, so it is suitable for equipment with high requirements on the surface.
♢ The spring plunger is a product involving vertical stroke. It can be used in mold release, workpiece lifting and positioning, etc., which can be widely applied in medium and low-precision mechanical devices, fixtures, molds, automation machines, etc.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Basic Information
| Pin Material | Stainless Steel | Body Material | Stainless Steel | Mounting Method | Press Fit |
|---|---|---|---|---|---|
| Initial Load (Range)(N) | 0.01~50 | Thread Locking Treatment | Not Provided | Tip Heat Treatment | Not Provided |
| Main Body Surface Treatment | Not Provided | Pin Surface Treatment | Not Provided |
Please check the type/dimensions/specifications of the part E-LMPJL4-3 in the Spring Plungers Micro, Standard series.
Specification/Dimensions
-
type
- E-LMPFH
- E-LMPFL
- E-LMPJH
- E-LMPJL
- E-LMPTL
-
Outer Dia. M(mm)
-
Stroke (S)(mm)
-
Min. Load(N)
-
Pin plunger type
- Cone Head R Type
- Flat Head
- Spherical
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 6 Day(s) or Less
- 12 Day(s) or Less
- 14 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What role does a ball plunger play?
- Answer: It specifies the stroke of the front ball and can be used for temporary positioning and indexing of workpieces.
- Question: What role does a spring plunger play?
- Answer: With pin-shaped front section, it can be used to eject workpieces or stoppers.
- Question: What is the meaning of load min and max?
- Answer: The min. load represents the initial load, and the max. load represents the load at the maximum press-in limit of ball head.
- Question: Can the knob plunger withstand radial force?
- Answer: No, it can only withstand axial force.
Products like this...
| Part Number |
|---|
| E-LMPFH3-6 |
| E-LMPFH4-3 |
| E-LMPFH4-6 |
| E-LMPJL4-6 |
| E-LMPJL4-9 |
| E-LMPJL5-12 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. M (mm) | Stroke (S) (mm) | Min. Load (N) | Max. Load (N) | Pin plunger type |
|---|---|---|---|---|---|---|---|---|---|
MYR 18.06 | 1 Piece(s) | Available | 6 Day(s) or more | 3 | 6 | 2.26 | 3.73 | Flat Head | |
MYR 15.14 | 1 Piece(s) | Available | 6 Day(s) or more | 4 | 3 | 3.43 | 5.3 | Flat Head | |
MYR 15.74 | 1 Piece(s) | Available | 1 Day(s) or more | 4 | 6 | 2.45 | 5.3 | Flat Head | |
MYR 15.72 | 1 Piece(s) | Available | 6 Day(s) or more | 4 | 6 | 0.49 | 2.06 | Spherical | |
MYR 16.89 | 1 Piece(s) | Available | 6 Day(s) or more | 4 | 9 | 0.69 | 3.92 | Spherical | |
MYR 18.06 | 1 Piece(s) | Available | 6 Day(s) or more | 5 | 12 | 0.83 | 5.79 | Spherical |
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy