Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]Round Wire Coil Springs - I.D. Referenced (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

·Degreasing (Anti-rust single packing)	: Part Number SL-□□
·Precision cleaning (Degassing double packing)	: Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

The series is standardized to maintain the spring constant uniformly to the same diameter.

(i)Caution

See here for related information such as technical information on cleaning effects and other cleaned product lineups.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

Closed Ends (Both Ends Not Ground*)

Closed Ends (Both Ends Ground)

I.D. D	ø8 or Less	+0.6 mm +0.1 mm		Free Length L	50 or Less ±1 mm
	ø10 or More	+0.8 mm +0.1 mm			60 or More ±2 mm

Type							[M] Material	Cleaning Method
Type							[M] Material	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-VUY	SL-VUR	SL-VUF	SL-VUL	SL-VUT	SL-VUM	SL-VUH	SUS304-WPB Spring Constant±10%	Degreasing	General environment	Anti-rust packing	General environment
SH-VUY	SH-VUR	SH-VUF	SH-VUL	SH-VUT	SH-VUM	SH-VUH		Precision cleaning	Class 1,000	Degassing double packing	Class 10
SHD-VUY	SHD-VUR	SHD-VUF	SHD-VUL	SHD-VUT	SHD-VUM	SHD-VUH		Electrolytic polishing + precision cleaning	Class 1,000	Degassing double packing	Class 10

[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number	—	L
SL-VUR10	—	40
SHD-VUM10	—	40

■SL-VUY·SH-VUY·SHD-VUY: Fmax. (allowable deflection) = L × Fa%, Spring Constant *Refer to the spring constant table

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.	Reference			Fa %
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.	Pitch	Solid Length	Total Coils	Fa %
SL-VUY	3	—	10	3.81	0.23	7.5	0.74 {0.08}	1.6	2	7.5	75
SH-VUY			15	3.87	0.26	11.3	1.10 {0.11}	1.6	3	10.5
SHD-VUY			20	3.93	0.29	15	1.47 {0.15}	1.4	4.7	15
			25	3.95	0.3	18.8	1.84 {0.19}	1.6	5.4	17
			30	3.99	0.32	22.5	2.21 {0.23}	1.5	7	20.75
SL-VUY	4	—	10	4.87	0.26	7.5	0.74 {0.08}	2.1	1.9	6.25	75
SH-VUY			15	4.95	0.3	11.3	1.10 {0.11}	1.9	3.1	9.25
SHD-VUY			20	4.99	0.32	15	1.47 {0.15}	1.9	4.1	11.75
			25	5.05	0.35	18.8	1.84 {0.19}	1.8	5.6	15
			30	5.05	0.35	22.5	2.21 {0.23}	2.2	5.6	15
SL-VUY	5	—	10	5.95	0.3	7.5	0.74 {0.08}	2.2	2.1	6	75
SH-VUY			15	5.99	0.32	11.3	1.10 {0.11}	2.7	2.7	7.25
SHD-VUY			20	6.05	0.35	15	1.47 {0.15}	2.6	3.6	9.25
			25	6.15	0.4	18.8	1.84 {0.19}	2.1	5.8	13.5
			30	6.15	0.4	22.5	2.21 {0.23}	2.5	5.8	13.5
			35	6.15	0.4	26.3	2.57 {0.26}	2.9	5.8	13.5
			40	6.25	0.45	30	2.94 {0.30}	2.1	9.5	20
			45	6.25	0.45	33.8	3.31 {0.34}	2.4	9.5	20
			50	6.25	0.45	37.5	3.68 {0.38}	2.7	9.5	20
SL-VUY	6	—	10	6.95	0.32	7.5	0.74 {0.08}	2.8	2	5.25	75
SH-VUY			15	7.15	0.4	9.8	0.96 {0.10}	1.8	4.2	9.5	65
SHD-VUY			20	7.15	0.4	13	1.27 {0.13}	2.5	4.2	9.5	65
			25	7.15	0.4	18.8	1.84 {0.19}	3.2	4.2	9.5	75
			30	7.25	0.45	22.5	2.21 {0.23}	2.4	6.7	13.75
			35	7.25	0.45	26.3	2.57 {0.26}	2.9	6.7	13.75
			40	7.25	0.45	30	2.94 {0.30}	3.3	6.7	13.75
			45	7.35	0.5	33.8	3.31 {0.34}	2.5	10.4	19.75
			50	7.35	0.5	37.5	3.68 {0.38}	2.7	10.4	19.75
			55	7.35	0.5	41.3	4.04 {0.41}	3	10.4	19.75
			60	7.35	0.5	45	4.41 {0.45}	3.3	10.4	19.75
SL-VUY	8	—	20	9.45	0.55	15	2.94 {0.30}	3.2	4.9	7.75	75
SH-VUY			25	9.45	0.55	18.8	3.68 {0.38}	4.1	4.9	7.75
SHD-VUY			30	9.55	0.6	22.5	4.41 {0.45}	3.4	6.8	10.25
			35	9.55	0.6	26.3	5.15 {0.53}	4	6.8	10.25
			40	9.65	0.65	30	5.88 {0.60}	3.5	9.1	13
			45	9.65	0.65	33.8	6.62 {0.68}	3.9	9.1	13
			50	9.65	0.65	37.5	7.35 {0.75}	4.4	9.1	13
			55	9.75	0.7	41.3	8.09 {0.83}	3.6	12.5	16.75
			60	9.75	0.7	45	8.82 {0.90}	3.9	12.5	16.75
			65	9.75	0.7	48.8	9.56 {0.98}	4.3	12.5	16.75
			70	9.85	0.75	52.5	10.29 {1.05}	3.5	16.7	21.25
			80	9.85	0.75	56	10.98 {1.12}	4	16.7	21.25	70
SL-VUY	10	—	20	11.75	0.65	13	2.55 {0.26}	3.1	5.7	7.75	65
SH-VUY			25	11.75	0.65	16.3	3.19 {0.33}	4	5.7	7.75	65
SHD-VUY			30	11.75	0.65	22.5	4.41 {0.45}	4.9	5.7	7.75	75
			35	11.85	0.7	26.3	5.15 {0.53}	4.2	7.6	9.75
			40	11.85	0.7	30	5.88 {0.60}	4.9	7.6	9.75
			45	11.95	0.75	33.8	6.62 {0.68}	4.3	9.8	12
			50	11.95	0.75	37.5	7.35 {0.75}	4.8	9.8	12
			55	11.95	0.75	41.3	8.09 {0.83}	5.3	9.8	12
			60	12.05	0.8	45	8.82 {0.90}	4.3	13	15.25
			65	12.05	0.8	48.8	9.56 {0.98}	4.7	13	15.25
			70	12.05	0.8	50.4	9.88 {1.01}	5.1	13	15.25	72
			80	12.05	0.8	52	10.19 {1.04}	5.9	13	15.25	65
SL-VUY	12	—	25	13.95	0.75	16.3	3.19 {0.33}	3.6	7	8.25	65
SH-VUY			30	13.95	0.75	19.5	3.82 {0.39}	4.4	7	8.25
SHD-VUY			35	13.95	0.75	22.8	4.46 {0.46}	5.2	7	8.25
			40	14.05	0.8	30	5.88 {0.60}	4.7	8.8	10	75
			45	14.05	0.8	33.8	6.62 {0.68}	5.3	8.8	10
			50	14.05	0.8	37.5	7.35 {0.75}	6	8.8	10
			55	14.05	0.8	41.3	8.09 {0.83}	6.6	8.8	10
			60	14.25	0.9	45	8.82 {0.90}	4.7	13.8	14.25
			65	14.25	0.9	48.8	9.56 {0.98}	5.1	13.8	14.25
			70	14.25	0.9	52.5	10.29 {1.05}	5.5	13.8	14.25
			80	14.25	0.9	60	11.76 {1.20}	6.3	13.8	14.25
			90	14.45	1	67.5	13.23 {1.35}	4.8	21.3	20.25
SL-VUY	16	—	35	18.25	0.9	26.3	5.15 {0.53}	5.8	7.7	7.5	75
SH-VUY			40	18.25	0.9	30	5.88 {0.60}	6.7	7.7	7.5
SHD-VUY			45	18.25	0.9	33.8	6.62 {0.68}	7.6	7.7	7.5
			50	18.25	0.9	37.5	7.35 {0.75}	8.6	7.7	7.5
			55	18.45	1	41.3	8.09 {0.83}	6.1	11.5	10.5
			60	18.45	1	45	8.82 {0.90}	6.7	11.5	10.5
			65	18.45	1	48.8	9.56 {0.98}	7.2	11.5	10.5
			70	18.45	1	52.5	10.29 {1.05}	7.8	11.5	10.5
			80	18.65	1.1	60	11.76 {1.20}	6.2	16.8	14.25
			90	18.65	1.1	67.5	13.23 {1.35}	7	16.8	14.25
			100	18.65	1.1	75	14.70 {1.50}	7.8	16.8	14.25

[ ! ] Both ends are not ground for all sizes. [!] Usage Count: 1 million times

■SL-VUR·SH-VUR·SHD-VUR: Fmax. (allowable deflection) = L × 60%, Spring Constant: 0.29 N/mm [0.03 kgf/mm]

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Reference
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Pitch	Solid Length	Total Coils
SL-VUR SH-VUR SHD-VUR	3	—	10*	3.99	0.32	6	1.76	{0.18}	1.3	3.1	8.5
			15*	4.05	0.35	9	2.65	{0.27}	1.5	4.2	11
			20*	4.15	0.4	12	3.53	{0.36}	1.2	7.4	17.5
			25*	4.15	0.4	15	4.41	{0.45}	1.5	7.4	17.5
			30*	4.25	0.45	18	5.29	{0.54}	1.2	11.5	24.5
SL-VUR SH-VUR SHD-VUR	4	—	10*	5.11	0.38	6	1.76	{0.18}	1.4	3.5	8
			15*	5.11	0.38	9	2.65	{0.27}	2.3	3.5	8
			20*	5.15	0.4	12	3.53	{0.36}	2.4	4.3	9.75
			25*	5.25	0.45	15	4.41	{0.45}	2	6.6	13.5
			30*	5.35	0.5	18	5.29	{0.54}	1.6	10.2	19.25
SL-VUR SH-VUR SHD-VUR	5	—	10*	6.15	0.4	6	1.76	{0.18}	2	2.9	6.25
			15	6.25	0.45	9	2.65	{0.27}	1.7	5	10
			20	6.25	0.45	12	3.53	{0.36}	2.2	5	10
			25	6.35	0.5	15	4.41	{0.45}	1.9	7.5	14
			30	6.35	0.5	18	5.29	{0.54}	2.3	7.5	14
			35	6.45	0.55	21	6.17	{0.63}	2.3	9.6	16.5
			40	6.45	0.55	24	7.06	{0.72}	2.6	9.6	16.5
			45	6.55	0.6	27	7.94	{0.81}	2.1	13.8	22
			50	6.55	0.6	30	8.82	{0.90}	2.4	13.8	22
SL-VUR SH-VUR SHD-VUR	6	—	10*	7.25	0.45	6	1.76	{0.18}	2.1	3.2	6
			15	7.35	0.5	9	2.65	{0.27}	1.9	5	9
			20	7.45	0.55	12	3.53	{0.36}	2	6.6	11
			25	7.45	0.55	15	4.41	{0.45}	2.5	6.6	11
			30	7.45	0.55	18	5.29	{0.54}	3	6.6	11
			35	7.55	0.6	21	6.17	{0.63}	2.7	9	14
			40	7.55	0.6	24	7.06	{0.72}	3	9	14
			45	7.65	0.65	27	7.94	{0.81}	2.4	13.3	19.5
			50	7.65	0.65	30	8.82	{0.90}	2.7	13.3	19.5
			55	7.75	0.7	33	9.7	{0.99}	2.3	18.2	25
			60	7.75	0.7	36	10.59	{1.08}	2.5	18.2	25
SL-VUR SH-VUR SHD-VUR	8	—	20	9.65	0.65	12	3.53	{0.36}	2.4	6.8	9.5
			25	9.65	0.65	15	4.41	{0.45}	2.9	6.8	9.5
			30	9.75	0.7	18	5.29	{0.54}	2.7	9.1	12
			35	9.75	0.7	21	6.17	{0.63}	3.2	9.1	12
			40	9.75	0.7	24	7.06	{0.72}	3.6	9.1	12
			45	9.95	0.8	27	7.94	{0.81}	2.4	16.8	20
			50	9.95	0.8	30	8.82	{0.90}	2.6	16.8	20
			55	9.95	0.8	33	9.7	{0.99}	2.9	16.8	20
			60	9.95	0.8	36	10.58	{1.08}	3.2	16.8	20
			65	10.15	0.9	39	11.47	{1.17}	2.2	28.8	31
			70	10.15	0.9	42	12.36	{1.26}	2.3	28.8	31
			80	10.15	0.9	48	14.12	{1.44}	2.7	28.8	31
SL-VUR SH-VUR SHD-VUR	10	—	20	11.85	0.7	12	3.53	{0.36}	3.3	5.6	7
			25	11.95	0.75	15	4.41	{0.45}	3.1	7.5	9
			30	12.05	0.8	18	5.29	{0.54}	2.7	10.4	12
			35	12.05	0.8	21	6.17	{0.63}	3.2	10.4	12
			40	12.05	0.8	24	7.06	{0.72}	3.6	10.4	12
			45	12.25	0.9	27	7.94	{0.81}	2.8	16.2	17
			50	12.25	0.9	30	8.82	{0.90}	3.1	16.2	17
			55	12.25	0.9	33	9.7	{0.99}	3.4	16.2	17
			60	12.25	0.9	36	10.58	{1.08}	3.8	16.2	17
			65	12.25	0.9	39	11.47	{1.17}	4.1	16.2	17
			70	12.45	1	42	12.6	{1.26}	2.9	26	25
			80	12.45	1	48	14.12	{1.44}	3.3	26	25
SL-VUR SH-VUR SHD-VUR	12	—	25	14.05	0.8	15	4.41	{0.45}	3.6	7.2	8
			30	14.05	0.8	18	5.29	{0.54}	4.3	7.2	8
			35	14.25	0.9	21	6.17	{0.63}	3.3	11.3	11.5
			40	14.25	0.9	24	7.06	{0.72}	3.8	11.3	11.5
			45	14.25	0.9	27	7.94	{0.81}	4.3	11.3	11.5
			50	14.45	1	30	8.82	{0.90}	3.3	17	16
			55	14.45	1	33	9.7	{0.99}	3.7	17	16
			60	14.45	1	36	10.58	{1.08}	4	17	16
			65	14.45	1	39	11.47	{1.17}	4.3	17	16
			70	14.65	1.1	42	12.35	{1.26}	3.3	25.3	22
			80	14.65	1.1	48	14.11	{1.44}	3.8	25.3	22
			90	14.65	1.1	54	15.88	{1.62}	4.3	25.3	22
SL-VUR SH-VUR SHD-VUR	16	—	35	18.45	1	21	6.17	{0.63}	4.7	9.5	8.5
			40	18.45	1	24	7.06	{0.72}	5.3	9.5	8.5
			45	18.65	1.1	27	7.94	{0.81}	4.5	13.2	11
			50	18.65	1.1	30	8.82	{0.90}	5	13.2	11
			55	18.65	1.1	33	9.7	{0.99}	5.5	13.2	11
			60	18.65	1.1	36	10.58	{1.08}	6	13.2	11
			65	18.85	1.2	39	11.47	{1.17}	5	18	14
			70	18.85	1.2	42	12.35	{1.26}	5.4	18	14
			80	18.85	1.2	48	14.11	{1.44}	6.2	18	14
			90	18.85	1.2	54	15.88	{1.62}	6.9	18	14
			100	18.85	1.2	60	17.64	{1.80}	7.7	18	14

[ ! ] Both ends are not ground for * marked types; both ends are ground for others.
[ ! ] Usage Count: 1 million times

■SL-VUF·SH-VUF·SHD-VUF: Fmax. (allowable deflection) = L × 45%, Spring Constant: 0.49 N/mm [0.05 kgf/mm]

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Reference
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Pitch	Solid Length	Total Coils
SL-VUF SH-VUF SHD-VUF	3	—	10*	4.05	0.35	4.5	2.21	{0.23}	1.6	3	7.5
			15*	4.15	0.4	6.75	3.31	{0.34}	1.5	4.7	10.75
			20*	4.25	0.45	9	4.41	{0.45}	1.3	7.5	15.5
			25*	4.25	0.45	11.25	5.51	{0.56}	1.7	7.5	15.5
			30*	4.35	0.5	13.5	6.62	{0.68}	1.4	11.4	21.75
SL-VUF SH-VUF SHD-VUF	4	—	10*	5.15	0.4	4.5	2.21	{0.23}	1.9	3	6.5
			15*	5.25	0.45	6.75	3.31	{0.34}	2	4.4	8.75
			20*	5.35	0.5	9	4.41	{0.45}	1.8	6.5	12
			25*	5.35	0.5	11.25	5.51	{0.56}	2.3	6.5	12
			30*	5.45	0.55	13.5	6.62	{0.68}	1.9	9.5	16.25
SL-VUF SH-VUF SHD-VUF	5	—	10*	6.35	0.5	4.5	2.21	{0.23}	1.4	4.4	7.75
			15	6.35	0.5	6.8	3.33	{0.34}	2.3	4.3	7.5
			20	6.35	0.5	9	4.41	{0.45}	3.1	4.3	7.5
			25	6.55	0.6	11.3	5.49	{0.56}	2.1	8.4	13
			30	6.55	0.6	13.5	6.57	{0.67}	2.5	8.4	13
			35	6.55	0.6	15.8	7.64	{0.78}	2.9	8.4	13
			40	6.75	0.7	18	8.82	{0.90}	1.9	16.1	22
			45	6.75	0.7	20.3	9.9	{1.01}	2.1	16.1	22
			50	6.75	0.7	22.5	10.98	{1.12}	2.4	16.1	22
SL-VUF SH-VUF SHD-VUF	6	—	10*	7.45	0.55	4.5	2.21	{0.23}	1.6	4.4	7
			15	7.55	0.6	6.8	3.33	{0.34}	1.9	6	9
			20	7.55	0.6	9	4.41	{0.45}	2.5	6	9
			25	7.55	0.6	11.3	5.49	{0.56}	3.1	6	9
			30	7.55	0.6	13.5	6.57	{0.67}	3.8	6	9
			35	7.75	0.7	15.8	7.64	{0.78}	2.7	10.5	14
			40	7.75	0.7	18	8.82	{0.90}	3.1	10.5	14
			45	7.75	0.7	20.3	9.9	{1.01}	3.5	10.5	14
			50	7.95	0.8	22.5	10.98	{1.12}	2.4	18.4	22
			55	7.95	0.8	24.8	12.05	{1.23}	2.6	18.4	22
			60	7.95	0.8	27	13.23	{1.35}	2.9	18.4	22
SL-VUF SH-VUF SHD-VUF	8	—	20	9.75	0.7	9	4.41	{0.45}	3.1	6	7.5
			25	9.75	0.7	11.3	5.49	{0.56}	3.8	6	7.5
			30	9.75	0.7	13.5	6.57	{0.67}	4.6	6	7.5
			35	9.95	0.8	15.8	7.64	{0.78}	3.3	10	11.5
			40	9.95	0.8	18	8.82	{0.90}	3.8	10	11.5
			45	9.95	0.8	20.3	9.9	{1.01}	4.3	10	11.5
			50	9.95	0.8	22.5	10.98	{1.12}	4.8	10	11.5
			55	10.35	1	24.8	12.05	{1.23}	2.5	24	23
			60	10.35	1	27	13.23	{1.35}	2.7	24	23
			65	10.35	1	29.3	14.31	{1.46}	3	24	23
			70	10.35	1	31.5	15.39	{1.57}	3.2	24	23
			80	10.35	1	36	17.64	{1.80}	3.6	24	23
SL-VUF SH-VUF SHD-VUF	10	—	20	12.05	0.8	9	4.41	{0.45}	3.3	6.4	7
			25	12.05	0.8	11.3	5.49	{0.56}	4.2	6.4	7
			30	12.05	0.8	13.5	6.57	{0.67}	5	6.4	7
			35	12.25	0.9	15.8	7.64	{0.78}	3.9	9.9	10
			40	12.25	0.9	18	8.82	{0.90}	4.4	9.9	10
			45	12.25	0.9	20.3	9.9	{1.01}	5	9.9	10
			50	12.25	0.9	22.5	10.98	{1.12}	5.6	9.9	10
			55	12.65	1.1	24.8	12.05	{1.23}	3.1	21.5	18.5
			60	12.65	1.1	27	13.23	{1.35}	3.4	21.5	18.5
			65	12.65	1.1	29.3	14.31	{1.46}	3.7	21.5	18.5
			70	12.65	1.1	31.5	15.39	{1.57}	4	21.5	18.5
			80	12.65	1.1	36	17.64	{1.80}	4.6	21.5	18.5
SL-VUF SH-VUF SHD-VUF	12	—	25	14.45	1	11.3	5.49	{0.56}	3.1	10	9
			30	14.45	1	13.5	6.57	{0.67}	3.8	10	9
			35	14.45	1	15.8	7.64	{0.78}	4.4	10	9
			40	14.45	1	18	8.82	{0.90}	5	10	9
			45	14.45	1	20.3	9.9	{1.01}	5.6	10	9
			50	14.65	1.1	22.5	10.98	{1.12}	4.3	14.9	12.5
			55	14.65	1.1	24.8	12.05	{1.23}	4.8	14.9	12.5
			60	14.65	1.1	27	13.23	{1.35}	5.2	14.9	12.5
			65	14.65	1.1	29.3	14.31	{1.46}	5.7	14.9	12.5
			70	14.85	1.2	31.5	15.39	{1.57}	4.4	21.6	17
			80	14.85	1.2	36	17.64	{1.80}	5	21.6	17
			90	14.85	1.2	40.5	19.8	{2.02}	5.6	21.6	17
SL-VUF SH-VUF SHD-VUF	16	—	35	18.85	1.2	15.8	7.64	{0.78}	4.7	11.4	8.5
			40	18.85	1.2	18	8.82	{0.90}	5.3	11.4	8.5
			45	18.85	1.2	20.3	9.9	{1.01}	6	11.4	8.5
			50	18.85	1.2	22.5	10.98	{1.12}	6.7	11.4	8.5
			55	19.05	1.3	24.8	12.05	{1.23}	5.2	16.3	11.5
			60	19.05	1.3	27	13.23	{1.35}	5.7	16.3	11.5
			65	19.05	1.3	29.3	14.31	{1.46}	6.2	16.3	11.5
			70	19.25	1.4	31.5	15.39	{1.57}	5.4	21	14
			80	19.25	1.4	36	17.64	{1.80}	6.2	21	14
			90	19.25	1.4	40.5	19.8	{2.02}	6.9	21	14
			100	19.25	1.4	45	22.05	{2.25}	7.7	21	14

[ ! ] Both ends are not ground for * marked types; both ends are ground for others.
[ ! ] Usage Count: 1 million times

■SL-VUL·SH-VUL·SHD-VUL: Fmax. (allowable deflection) = L × 40%, Spring Constant: 0.98 N/mm [0.10 kgf/mm]

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Reference
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Pitch	Solid Length	Total Coils
SL-VUL SH-VUL SHD-VUL	3	—	10*	4.25	0.45	4	3.92	{0.40}	1.2	4.5	9
			15*	4.35	0.5	6	5.88	{0.60}	1.3	6.7	12.3
			20*	4.35	0.5	8	7.84	{0.80}	1.8	6.7	12.3
			25	4.55	0.6	10	9.8	{1.00}	1.2	13.7	21.8
			30	4.55	0.6	12	11.76	{1.20}	1.4	13.7	21.8
SL-VUL SH-VUL SHD-VUL	4	—	10*	5.35	0.5	4	3.92	{0.40}	1.7	4	7
			15*	5.45	0.55	6	5.88	{0.60}	1.8	5.7	9.3
			20	5.55	0.6	8	7.84	{0.80}	1.8	7.8	12
			25	5.55	0.6	10	9.8	{1.00}	2.3	7.8	12
			30	5.65	0.65	12	11.76	{1.20}	2.1	10.6	15.3
SL-VUL SH-VUL SHD-VUL	5	—	10	6.55	0.6	4	3.92	{0.40}	1.7	4.8	7
			15	6.55	0.6	6	5.88	{0.60}	2.5	4.8	7
			20	6.55	0.6	8	7.84	{0.80}	3.3	4.8	7
			25	6.75	0.7	10	9.8	{1.00}	2.3	9.1	12
			30	6.75	0.7	12	11.76	{1.20}	2.7	9.1	12
			35	6.75	0.7	14	13.72	{1.40}	3.2	9.1	12
			40	6.95	0.8	16	15.68	{1.60}	2.2	16	19
			45	6.95	0.8	18	17.64	{1.80}	2.5	16	19
			50	6.95	0.8	20	19.6	{2.00}	2.8	16	19
SL-VUL SH-VUL SHD-VUL	6	—	10	7.65	0.65	4	3.92	{0.40}	1.8	5.1	6.8
			15	7.75	0.7	6	5.88	{0.60}	2.1	6.3	8
			20	7.75	0.7	8	7.84	{0.80}	2.9	6.3	8
			25	7.95	0.8	10	9.8	{1.00}	2.3	10.4	12
			30	7.95	0.8	12	11.76	{1.20}	2.7	10.4	12
			35	7.95	0.8	14	13.72	{1.40}	3.2	10.4	12
			40	8.15	0.9	16	15.68	{1.60}	2.5	16.2	17
			45	8.15	0.9	18	17.64	{1.80}	2.8	16.2	17
			50	8.15	0.9	20	19.6	{2.00}	3.1	16.2	17
			55	8.15	0.9	22	21.56	{2.20}	3.4	16.2	17
			60	8.15	0.9	24	23.52	{2.40}	3.8	16.2	17
SL-VUL SH-VUL SHD-VUL	8	—	20	10.15	0.9	8	7.84	{0.80}	2.4	9.5	9.5
			25	10.15	0.9	10	9.8	{1.00}	2.9	9.5	9.5
			30	10.35	1	12	11.76	{1.20}	2.5	14	13
			35	10.35	1	14	13.72	{1.40}	2.9	14	13
			40	10.35	1	16	15.68	{1.60}	3.3	14	13
			45	10.35	1	18	17.64	{1.80}	3.8	14	13
			50	10.35	1	20	19.6	{2.00}	4.2	14	13
			55	10.35	1	22	21.56	{2.20}	4.6	14	13
			60	10.75	1.2	24	23.52	{2.40}	2.7	28.8	23
			65	10.75	1.2	26	25.48	{2.60}	3	28.8	23
			70	10.75	1.2	28	27.44	{2.80}	3.2	28.8	23
			80	10.75	1.2	32	31.36	{3.20}	3.6	28.8	23
SL-VUL SH-VUL SHD-VUL	10	—	20	12.45	1	8	7.84	{0.80}	3.1	8.5	7.5
			25	12.45	1	10	9.8	{1.00}	3.8	8.5	7.5
			30	12.65	1.1	12	11.76	{1.20}	3.2	12.7	10.5
			35	12.65	1.1	14	13.72	{1.40}	3.7	12.7	10.5
			40	12.65	1.1	16	15.68	{1.60}	4.2	12.7	10.5
			45	12.65	1.1	18	17.64	{1.80}	4.7	12.7	10.5
			50	12.65	1.1	20	19.6	{2.00}	5.3	12.7	10.5
			55	13.05	1.3	22	21.56	{2.20}	3.1	25.4	18.5
			60	13.05	1.3	24	23.52	{2.40}	3.4	25.4	18.5
			65	13.05	1.3	26	25.48	{2.60}	3.7	25.4	18.5
			70	13.05	1.3	28	27.44	{2.80}	4	25.4	18.5
			80	13.05	1.3	32	31.36	{3.20}	4.6	25.4	18.5
SL-VUL SH-VUL SHD-VUL	12	—	25	14.85	1.2	10	9.8	{1.00}	2.9	12.6	9.5
			30	14.85	1.2	12	11.76	{1.20}	3.5	12.6	9.5
			35	14.85	1.2	14	13.72	{1.40}	4.1	12.6	9.5
			40	14.85	1.2	16	15.68	{1.60}	4.7	12.6	9.5
			45	14.85	1.2	18	17.64	{1.80}	5.3	12.6	9.5
			50	14.85	1.2	20	19.6	{2.00}	5.9	12.6	9.5
			55	15.25	1.4	22	21.56	{2.20}	4.1	21.7	14.5
			60	15.25	1.4	24	23.52	{2.40}	4.4	21.7	14.5
			65	15.25	1.4	26	25.48	{2.60}	4.8	21.7	14.5
			70	15.25	1.4	28	27.44	{2.80}	5.2	21.7	14.5
			80	15.25	1.4	32	31.36	{3.20}	5.9	21.7	14.5
			90	15.25	1.4	36	35.28	{3.60}	6.7	21.7	14.5
SL-VUL SH-VUL SHD-VUL	16	—	35	19.45	1.5	14	13.72	{1.40}	4.1	15.8	9.5
			40	19.45	1.5	16	15.68	{1.60}	4.7	15.8	9.5
			45	19.45	1.5	18	17.64	{1.80}	5.3	15.8	9.5
			50	19.45	1.5	20	19.6	{2.00}	5.9	15.8	9.5
			55	19.85	1.7	22	21.56	{2.20}	4.4	24.7	13.5
			60	19.85	1.7	24	23.52	{2.40}	4.8	24.7	13.5
			65	19.85	1.7	26	25.48	{2.60}	5.2	24.7	13.5
			70	19.85	1.7	28	27.44	{2.80}	5.6	24.7	13.5
			80	19.85	1.7	32	31.36	{3.20}	6.4	24.7	13.5
			90	19.85	1.7	36	35.28	{3.60}	7.2	24.7	13.5
			100	19.85	1.7	40	39.2	{4.00}	8	24.7	13.5

[ ! ] Both ends are not ground for * marked types; both ends are ground for others.
[ ! ] Usage Count: 1 million times

■SL-VUT·SH-VUT·SHD-VUT: Fmax. (allowable deflection) = L × 40%, Spring Constant *Refer to the spring constant table

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Reference
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Pitch	Solid Length	Total Coils
SL-VUT SH-VUT SHD-VUT	3	—	10*	4.35	0.5	4	5.88	{0.60}	1.3	4.8	8.5
			15*	4.45	0.55	6	8.82	{0.90}	1.4	6.8	11.3
			20	4.55	0.6	8	11.76	{1.20}	1.4	9.5	14.8
			25	4.65	0.65	10	14.7	{1.50}	1.4	12.7	18.5
			30	4.75	0.7	12	17.64	{1.80}	1.3	17.2	23.5
SL-VUT SH-VUT SHD-VUT	4	—	10*	5.45	0.55	4	5.88	{0.60}	1.7	4.3	6.8
			15	5.55	0.6	6	8.82	{0.90}	2.1	5.7	8.5
			20	5.75	0.7	8	11.76	{1.20}	1.6	10	13.3
			25	5.75	0.7	10	14.7	{1.50}	2	10	13.3
			30	5.95	0.8	12	17.64	{1.80}	1.5	16.8	20
SL-VUT SH-VUT SHD-VUT	5	—	10	6.65	0.65	4	7.84	{0.80}	2.3	4.4	5.8
			15	6.85	0.75	6	11.76	{1.20}	2.1	7	8.3
			20	6.95	0.8	8	15.68	{1.60}	2.3	8.8	10
			25	6.95	0.8	10	19.6	{2.00}	2.9	8.8	10
			30	7.15	0.9	12	23.52	{2.40}	2.3	13.8	14.3
			35	7.15	0.9	14	27.44	{2.80}	2.7	13.8	14.3
			40	7.35	1	16	31.36	{3.20}	2.1	20.5	19.5
			45	7.35	1	18	35.28	{3.60}	2.4	20.5	19.5
			50	7.55	1.1	20	39.2	{4.00}	2	28.9	25.3
SL-VUT SH-VUT SHD-VUT	6	—	10	7.85	0.75	4	7.84	{0.80}	2.2	5.1	5.8
			15	7.95	0.8	6	11.76	{1.20}	2.6	6.4	7
			20	8.15	0.9	8	15.68	{1.60}	2.3	9.7	9.8
			25	8.15	0.9	10	19.6	{2.00}	2.9	9.7	9.8
			30	8.15	0.9	12	23.52	{2.40}	3.6	9.7	9.8
			35	8.35	1	14	27.44	{2.80}	2.8	14.5	13.5
			40	8.35	1	16	31.36	{3.20}	3.3	14.5	13.5
			45	8.55	1.1	18	35.28	{3.60}	2.6	20.9	18
			50	8.55	1.1	20	39.2	{4.00}	2.9	20.9	18
			55	8.75	1.2	22	43.12	{4.40}	2.4	29.4	23.5
			60	8.75	1.2	24	47.04	{4.80}	2.6	29.4	23.5
SL-VUT SH-VUT SHD-VUT	8	—	20	10.35	1	8	15.68	{1.60}	3.2	8.5	7.5
			25	10.35	1	10	19.6	{2.00}	4.1	8.5	7.5
			30	10.75	1.2	12	23.52	{2.40}	2.5	16.5	12.8
			35	10.75	1.2	14	27.44	{2.80}	3	16.5	12.8
			40	10.75	1.2	16	31.36	{3.20}	3.4	16.5	12.8
			45	10.75	1.2	18	35.28	{3.60}	3.9	16.5	12.8
			50	10.75	1.2	20	39.2	{4.00}	4.4	16.5	12.8
			55	11.15	1.4	22	43.12	{4.40}	2.7	30.5	20.8
			60	11.15	1.4	24	47.04	{4.80}	3	30.5	20.8
			65	11.15	1.4	26	50.96	{5.20}	3.3	30.5	20.8
			70	11.15	1.4	28	54.88	{5.60}	3.5	30.5	20.8
			80	11.15	1.4	32	62.72	{6.40}	4.1	30.5	20.8
SL-VUT SH-VUT SHD-VUT	10	—	20	12.65	1.1	8	15.68	{1.60}	4.1	8	6.3
			25	12.65	1.1	10	19.6	{2.00}	5.3	8	6.3
			30	12.85	1.2	12	23.52	{2.40}	4.6	10.8	8
			35	12.85	1.2	14	27.44	{2.80}	5.4	10.8	8
			40	13.05	1.3	16	31.36	{3.20}	4.6	14.3	10
			45	13.05	1.3	18	35.28	{3.60}	5.3	14.3	10
			50	13.25	1.4	20	39.2	{4.00}	4.4	18.9	12.5
			55	13.25	1.4	22	43.12	{4.40}	4.9	18.9	12.5
			60	13.25	1.4	24	47.04	{4.80}	5.4	18.9	12.5
			65	13.45	1.5	26	50.96	{5.20}	4.5	24.8	15.5
			70	13.45	1.5	28	54.88	{5.60}	4.9	24.8	15.5
			80	13.45	1.5	32	62.72	{6.40}	5.7	24.8	15.5
SL-VUT SH-VUT SHD-VUT	12	—	25	15.05	1.3	10	19.6	{2.00}	4.4	10.4	7
			30	15.05	1.3	12	23.52	{2.40}	5.4	10.4	7
			35	15.05	1.3	14	27.44	{2.80}	6.4	10.4	7
			40	15.25	1.4	16	31.36	{3.20}	5.7	13.3	8.5
			45	15.25	1.4	18	35.28	{3.60}	6.4	13.3	8.5
			50	15.45	1.5	20	39.2	{4.00}	5.6	16.9	10.3
			55	15.45	1.5	22	43.12	{4.40}	6.3	16.9	10.3
			60	15.45	1.5	24	47.04	{4.80}	6.9	16.9	10.3
			65	15.85	1.7	26	50.96	{5.20}	4.7	27.2	15
			70	15.85	1.7	28	54.88	{5.60}	5.1	27.2	15
			80	15.85	1.7	32	62.72	{6.40}	5.8	27.2	15
			90	15.85	1.7	36	70.56	{7.20}	6.6	27.2	15
SL-VUT SH-VUT SHD-VUT	16	—	35	19.65	1.6	14	27.44	{2.80}	6.3	12.8	7
			40	19.65	1.6	16	31.36	{3.20}	7.3	12.8	7
			45	19.65	1.6	18	35.28	{3.60}	8.3	12.8	7
			50	19.85	1.7	20	39.2	{4.00}	7.4	15.8	8.3
			55	19.85	1.7	22	43.12	{4.40}	8.2	15.8	8.3
			60	19.85	1.7	24	47.04	{4.80}	9	15.8	8.3
			65	20.05	1.8	26	50.96	{5.20}	7.9	19.4	9.8
			70	20.05	1.8	28	54.88	{5.60}	8.5	19.4	9.8
			80	20.45	2	32	62.72	{6.40}	6.7	28.5	13.3
			90	20.45	2	36	70.56	{7.20}	7.6	28.5	13.3
			100	20.45	2	40	78.4	{8.00}	8.5	28.5	13.3

[ ! ] Both ends are not ground for * marked types; both ends are ground for others.
[ ! ] Usage Count: 1 million times

■SL-VUM·SH-VUM·SHD-VUM: Fmax. (allowable deflection) = L × 35%, Spring Constant: 2.94 N/mm [0.30 kgf/mm]

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Reference
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Pitch	Solid Length	Total Coils
SL-VUM SH-VUM SHD-VUM	5	—	15	6.95	0.8	5.3	15.39	{1.57}	2.3	6.8	7.5
			20	7.15	0.9	7	20.58	{2.10}	1.8	11.7	12
			25	7.15	0.9	8.8	25.68	{2.62}	2.3	11.7	12
			30	7.35	1	10.5	30.87	{3.15}	2.4	14.5	13.5
			35	7.35	1	12.3	35.97	{3.67}	2.8	14.5	13.5
			40	7.35	1	14	41.16	{4.20}	3.2	14.5	13.5
			45	7.55	1.1	15.8	46.26	{4.72}	2.5	22	19
			50	7.55	1.1	17.5	51.45	{5.25}	2.8	22	19
SL-VUM SH-VUM SHD-VUM	6	—	15	8.15	0.9	5.3	15.39	{1.57}	2.3	7.7	7.5
			20	8.15	0.9	7	20.58	{2.10}	3	7.7	7.5
			25	8.35	1	8.8	25.68	{2.62}	2.8	11	10
			30	8.35	1	10.5	30.87	{3.15}	3.3	11	10
			35	8.35	1	12.3	35.97	{3.67}	3.9	11	10
			40	8.75	1.2	14	41.16	{4.20}	2.6	21	16.5
			45	8.75	1.2	15.8	46.26	{4.72}	2.9	21	16.5
			50	8.75	1.2	17.5	51.45	{5.25}	3.2	21	16.5
			55	8.95	1.3	19.3	56.55	{5.77}	2.6	29.9	22
			60	8.95	1.3	21	61.74	{6.30}	2.9	29.9	22
SL-VUM SH-VUM SHD-VUM	8	—	20	10.55	1.1	7	20.58	{2.10}	3.3	8.8	7
			25	10.55	1.1	8.8	25.68	{2.62}	4.2	8.8	7
			30	10.55	1.1	10.5	30.87	{3.15}	5	8.8	7
			35	10.95	1.3	12.3	35.97	{3.67}	3.5	15.6	11
			40	10.95	1.3	14	41.16	{4.20}	4	15.6	11
			45	10.95	1.3	15.8	46.26	{4.72}	4.5	15.6	11
			50	10.95	1.3	17.5	51.45	{5.25}	5	15.6	11
			55	11.35	1.5	19.3	56.55	{5.77}	3.3	27.8	17.5
			60	11.35	1.5	21	61.74	{6.30}	3.6	27.8	17.5
			65	11.35	1.5	22.8	66.84	{6.82}	3.9	27.8	17.5
			70	11.35	1.5	24.5	72.03	{7.35}	4.2	27.8	17.5
			80	11.35	1.5	28	82.32	{8.40}	4.8	27.8	17.5
SL-VUM SH-VUM SHD-VUM	10	—	20	12.85	1.2	7	20.58	{2.10}	4	8.4	6
			25	13.05	1.3	8.8	25.68	{2.62}	4.2	10.4	7
			30	13.05	1.3	10.5	30.87	{3.15}	5	10.4	7
			35	13.05	1.3	12.3	35.97	{3.67}	5.8	10.4	7
			40	13.45	1.5	14	41.16	{4.20}	3.8	18.8	11.5
			45	13.45	1.5	15.8	46.26	{4.72}	4.3	18.8	11.5
			50	13.45	1.5	17.5	51.45	{5.25}	4.8	18.8	11.5
			55	13.45	1.5	19.3	56.55	{5.77}	5.2	18.8	11.5
			60	13.45	1.5	21	61.74	{6.30}	5.7	18.8	11.5
			65	13.85	1.7	22.8	66.84	{6.82}	4.3	28.9	16
			70	13.85	1.7	24.5	72.03	{7.35}	4.7	28.9	16
			80	13.85	1.7	28	82.32	{8.40}	5.3	28.9	16
SL-VUM SH-VUM SHD-VUM	12	—	25	15.25	1.4	8.8	25.68	{2.62}	5	9.8	6
			30	15.25	1.4	10.5	30.87	{3.15}	6	9.8	6
			35	15.25	1.4	12.3	35.97	{3.67}	7	9.8	6
			40	15.65	1.6	14	41.16	{4.20}	5	16	9
			45	15.65	1.6	15.8	46.26	{4.72}	5.6	16	9
			50	15.65	1.6	17.5	51.45	{5.25}	6.3	16	9
			55	15.65	1.6	19.3	56.55	{5.77}	6.9	16	9
			60	16.05	1.8	21	61.74	{6.30}	5.5	23.4	12
			65	16.05	1.8	22.8	66.84	{6.82}	5.9	23.4	12
			70	16.05	1.8	24.5	72.03	{7.35}	6.4	23.4	12
			80	16.05	1.8	28	82.32	{8.40}	7.3	23.4	12
			90	16.05	1.8	31.5	92.61	{9.45}	8.2	23.4	12
SL-VUM SH-VUM SHD-VUM	16	—	35	20.05	1.8	12.3	35.97	{3.67}	5.8	14.4	7
			40	20.05	1.8	14	41.16	{4.20}	6.7	14.4	7
			45	20.05	1.8	15.8	46.26	{4.72}	7.5	14.4	7
			50	20.05	1.8	17.5	51.45	{5.25}	8.3	14.4	7
			55	20.05	1.8	19.3	56.55	{5.77}	9.2	14.4	7
			60	20.85	2.2	21	61.74	{6.30}	5.5	28.6	12
			65	20.85	2.2	22.8	66.84	{6.82}	5.9	28.6	12
			70	20.85	2.2	24.5	72.03	{7.35}	6.4	28.6	12
			80	20.85	2.2	28	82.32	{8.40}	7.3	28.6	12
			90	20.85	2.2	31.5	92.61	{9.45}	8.2	28.6	12
			100	20.85	2.2	35	102.9	{10.50}	9.1	28.6	12

[ ! ] Both ends are ground for all sizes.
[ ! ] Usage Count: 1 million times

■SL-VUH·SH-VUH·SHD-VUH: Fmax. (allowable deflection) = L × Fa%, Spring Constant *Refer to the spring constant table

Part Number				O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Reference			Fa %
Type	D	—	L	O.D. D₁ (Reference Value)	Wire Dia. d	F max.	N{kgf} max.		Pitch	Solid Length	Total Coils	Fa %
SL-VUH SH-VUH SHD-VUH	3	—	10	4.55	0.6	3	8.82	{ 0.90}	1.3	5.7	8.5	30
			15	4.65	0.65	4.5	13.23	{ 1.35}	1.6	7.5	10.5
			20	4.85	0.75	6	17.64	{ 1.80}	1.3	12.8	16
			25	4.95	0.8	7.5	22.05	{ 2.25}	1.3	16.6	19.8
			30	4.95	0.8	8.4	24.7	{ 2.52}	1.6	16.6	19.8	28
SL-VUH SH-VUH SHD-VUH	4	—	10	5.75	0.7	3	8.82	{ 0.90}	1.4	6.2	7.8	30
			15	5.75	0.7	4.5	13.23	{ 1.35}	2.3	6.2	7.8
			20	5.95	0.8	6	17.64	{ 1.80}	1.9	9.8	11.3
			25	5.95	0.8	7.5	22.05	{ 2.25}	2.5	9.8	11.3
			30	6.15	0.9	9	26.46	{ 2.70}	2	15.1	15.8
SL-VUH SH-VUH SHD-VUH	5	—	10	7.05	0.85	3	17.64	{ 1.80}	2.5	5.4	5.3	30
			15	7.35	1	4.5	26.46	{ 2.70}	2.1	9	8	30
			20	7.35	1	5.6	32.93	{ 3.36}	3	9	8	28
			25	7.55	1.1	7.5	44.1	{ 4.50}	2.6	12.7	10.5	30
			30	7.55	1.1	7.8	45.86	{ 4.68}	3.2	12.7	10.5	26
			35	7.95	1.3	10.5	61.74	{ 6.30}	2.1	23.1	16.8	30
			40	7.95	1.3	10.8	63.5	{ 6.48}	2.5	23.1	16.8	27
			45	7.95	1.3	11.25	66.15	{ 6.75}	2.8	23.1	16.8	25
			50	8.15	1.4	12.5	73.5	{ 7.50}	2.4	30.8	21	25
SL-VUH SH-VUH SHD-VUH	6	—	10	8.15	0.9	3	17.64	{ 1.80}	3.2	5	4.5	30
			15	8.55	1.1	4.5	26.46	{ 2.70}	2.3	9.4	7.5
			20	8.55	1.1	6	35.28	{ 3.60}	3.2	9.4	7.5
			25	8.95	1.3	7.5	44.1	{ 4.50}	2.4	16	11.3
			30	8.95	1.3	9	52.92	{ 5.40}	2.9	16	11.3
			35	9.15	1.4	10.5	61.74	{ 6.30}	2.6	21.4	14.3
			40	9.15	1.4	12	70.56	{ 7.20}	3	21.4	14.3
			45	9.35	1.5	13.5	79.38	{ 8.10}	2.6	28.5	18
			50	9.35	1.5	14	82.32	{ 8.40}	2.9	28.5	18	28
			55	9.35	1.5	14.3	84.08	{ 8.58}	3.2	28.5	18	26
			60	9.55	1.6	15	88.2	{ 9.00}	2.8	36.8	22	25
SL-VUH SH-VUH SHD-VUH	8	—	20	10.95	1.3	6	35.28	{ 3.60}	3.6	10.1	6.8	30
			25	11.15	1.4	7.5	44.1	{ 4.50}	3.5	13	8.3
			30	11.15	1.4	9	52.92	{ 5.40}	4.3	13	8.3
			35	11.55	1.6	10.5	61.74	{ 6.30}	3.1	20.8	12
			40	11.55	1.6	12	70.56	{ 7.20}	3.6	20.8	12
			45	11.55	1.6	13.5	79.38	{ 8.10}	4.1	20.8	12
			50	11.95	1.8	15	88.2	{ 9.00}	3	32.9	17.3
			55	11.95	1.8	16.5	97.02	{ 9.90}	3.3	32.9	17.3
			60	11.95	1.8	18	105.84	{10.80}	3.6	32.9	17.3
			65	11.95	1.8	18.2	107.02	{10.92}	4	32.9	17.3	28
			70	11.95	1.8	18.9	111.13	{11.34}	4.3	32.9	17.3	27
			80	12.35	2	24	141.12	{14.40}	3.4	49.5	23.8	30
SL-VUH SH-VUH SHD-VUH	10	—	20	13.65	1.6	6	58.86	{ 6.00}	4.8	10.4	5.5	30
			25	14.05	1.8	7.5	73.58	{ 7.50}	4	14.9	7.3
			30	14.25	1.9	9	88.29	{ 9.00}	4.1	17.6	8.3
			35	14.25	1.9	10.5	103.01	{10.50}	4.9	17.6	8.3
			40	14.65	2.1	12	117.72	{12.00}	3.9	25.2	11
			45	14.65	2.1	13.5	132.44	{13.50}	4.5	25.2	11
			50	14.65	2.1	14	137.34	{14.00}	5	25.2	11	28
			55	14.65	2.1	14.3	140.28	{14.30}	5.6	25.2	11	26
			60	15.25	2.4	15.6	153.04	{15.60}	4	39.6	15.5
			65	15.25	2.4	16.9	165.79	{16.90}	4.4	39.6	15.5
			70	15.25	2.4	18.2	178.54	{18.20}	4.8	39.6	15.5
			80	15.45	2.5	20.8	204.05	{20.80}	4.6	47.5	18
SL-VUH SH-VUH SHD-VUH	12	—	25	16.25	1.9	7.5	73.58	{ 7.50}	5.3	13.3	6	30
			30	16.25	1.9	9	88.29	{ 9.00}	6.5	13.3	6
			35	16.65	2.1	10.5	103.01	{10.50}	5.3	18.4	7.8
			40	16.65	2.1	12	117.72	{12.00}	6.2	18.4	7.8
			45	17.05	2.3	13.5	132.44	{13.50}	5	25.3	10
			50	17.05	2.3	15	147.15	{15.00}	5.6	25.3	10
			55	17.05	2.3	16.5	161.87	{16.50}	6.3	25.3	10
			60	17.65	2.6	18	176.58	{18.00}	4.5	39	14
			65	17.65	2.6	19.5	191.3	{19.50}	4.9	39	14
			70	17.65	2.6	20.3	199.14	{20.30}	5.4	39	14	29
			80	18.05	2.8	21.6	211.9	{21.60}	4.7	52.5	17.8	27
			90	18.05	2.8	22.5	220.73	{22.50}	5.3	52.5	17.8	25
SL-VUH SH-VUH SHD-VUH	16	—	35	21.45	2.5	10.5	103.01	{10.50}	5.7	20.7	7.3	30
			40	21.45	2.5	12	117.72	{12.00}	6.6	20.7	7.3
			45	21.45	2.5	13.5	132.44	{13.50}	7.6	20.7	7.3
			50	21.45	2.5	15	147.15	{15.00}	8.5	20.7	7.3
			55	22.05	2.8	16.5	161.87	{16.50}	6.3	30.1	9.8
			60	22.05	2.8	18	176.58	{18.00}	7	30.1	9.8
			65	22.05	2.8	19.5	191.3	{19.50}	7.6	30.1	9.8
			70	22.45	3	21	206.01	{21.00}	6.4	39	12
			80	22.45	3	24	235.44	{24.00}	7.4	39	12
			90	22.85	3.2	27	264.87	{27.00}	6.6	49.6	14.5
			100	22.85	3.2	30	294.3	{30.00}	7.4	49.6	14.5

[ ! ] Both ends are ground for all sizes.
[ ! ] Usage Count: 1 million times

● How to calculate the number of coils (reference value):
Total coils = solid length / wire diameter (d) - 1
Number of active coils = total coils - 2
* The values of the number of coils are for reference only. There may be some variations depending on the lot.
[ ! ] The values of solid length are for reference only. There may be some variations depending on the lot.
Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).

■Spring Constant (N/mm) [kgf/mm]

Type

SL-VUY

SL-VUR

SL-VUF

SL-VUL

SL-VUT

SL-VUM

SL-VUH

SH-VUY

SH-VUR

SH-VUF

SH-VUL

SH-VUT

SH-VUM

SH-VUH

SHD-VUY

SHD-VUR

SHD-VUF

SHD-VUL

SHD-VUT

SHD-VUM

SHD-VUH

0.098
{0.01}

0.29
{0.03}

0.49
{0.05}

0.98
{0.10}

1.47
{0.15}

2.94
{0.30}

1.96
{0.20}

2.94
{0.30}

5.88
{0.60}

0.196
{0.02}

9.81
{1.00}

Fmax.

F = L × Fa%

F=L × 60%

F=L × 45%

F=L × 40%

F=L × 35%

F = L × Fa%

Cautions/Prohibitions

Operating Temperature

Stainless Steel: -10 to 100°C
* Load value attenuates when tension springs are used in temperature higher than above, although it depends on other conditions.
* If you plan to use it in the environment with temperature difference or humidity such as outdoors, stainless steel is recommended.
* Heat resistant springs are also available. For the details, see the catalog of "Standard Components for Plastic Mold".

Standard Usage Count

Approx. 1 million times
* The above number is just a standard. The usage count varies depending on the direction of tension, operating temperature, environment, and deflection.
It is recommended to use the springs within the range of the allowable deflection F max.(mm).

Others

·Round Wire Coil Springs are manufactured based on the following diametric tolerance priorities given. I.D. Selectable Type: I.D. tolerance prioritized / O.D. Selectable Type: O.D. tolerance prioritized.
·Stainless steel springs are also magnetic. Please be careful.

Cleaning Process
· Degreasing (Part Number: SL-□□)

Working Environment: General environment
Alkaline warm pure water		Ultrasonic pure water cleaning after cleaning with pure water *3 times		Dry		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaningRo water cleaning		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean benchin a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		Electrolytic polishing with an electrolytic polishing layer　according to the material		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean benchin a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
SHD-VUF5-40
SHD-VUF5-45
SHD-VUF5-50
SHD-VUF6-15
SHD-VUF6-20
SHD-VUF6-25
SHD-VUF6-30
SHD-VUF6-35
SHD-VUF6-40
SHD-VUF6-45
SHD-VUF6-50
SHD-VUF6-55
SHD-VUF6-60
SHD-VUF8-20
SHD-VUF8-25
SHD-VUF8-30
SHD-VUF8-35
SHD-VUF8-40
SHD-VUF8-45
SHD-VUF8-50
SHD-VUF8-55
SHD-VUF8-60
SHD-VUF8-65
SHD-VUF8-70
SHD-VUF8-80
SHD-VUF10-20
SHD-VUF10-25
SHD-VUF10-30
SHD-VUF10-35
SHD-VUF10-40
SHD-VUF10-45
SHD-VUF10-50
SHD-VUF10-55
SHD-VUF10-60
SHD-VUF10-65
SHD-VUF10-70
SHD-VUF10-80
SHD-VUF12-25
SHD-VUF12-30
SHD-VUF12-35
SHD-VUF12-40
SHD-VUF12-45
SHD-VUF12-50
SHD-VUF12-55
SHD-VUF12-60
SHD-VUF12-65
SHD-VUF12-70
SHD-VUF12-80
SHD-VUF12-90
SHD-VUF16-35
SHD-VUF16-40
SHD-VUF16-45
SHD-VUF16-50
SHD-VUF16-55
SHD-VUF16-60
SHD-VUF16-65
SHD-VUF16-70
SHD-VUF16-80
SHD-VUF16-90
SHD-VUF16-100
SHD-VUL5-10
SHD-VUL5-15
SHD-VUL5-20
SHD-VUL5-25
SHD-VUL5-30
SHD-VUL5-35
SHD-VUL5-40
SHD-VUL5-45
SHD-VUL5-50
SHD-VUL6-15
SHD-VUL6-20
SHD-VUL6-25
SHD-VUL6-30
SHD-VUL6-35
SHD-VUL6-40
SHD-VUL6-45
SHD-VUL6-50
SHD-VUL6-55
SHD-VUL6-60
SHD-VUL8-20
SHD-VUL8-25
SHD-VUL8-30
SHD-VUL8-35
SHD-VUL8-40
SHD-VUL8-45
SHD-VUL8-50
SHD-VUL8-55
SHD-VUL8-60
SHD-VUL8-65
SHD-VUL8-70

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Free Length L (mm)	Inner Dia. D-2d (or D) (Ø)	Outer Dia. D (or D1) (Ø)	Height with the max. load applied ([Free Length] – [Allowable Deflection]) (mm)	Spring Constant (N/mm)	Allowable Load (Configurable Range) (N)	Max. Load (N)	Wire Dia. (Ø)	Solid Length (mm)	Cleaning Method	Applications	End Face State	Total Coils Nt *Reference Value	Allowable Deflection (mm)	Total Number of Turns N
MYR 37.31	1 Piece(s)	Available	6 Day(s) or more	40	5	6.75	22	0.49	8.51~16.00	8.82	0.7	16.1	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	22	18	-
MYR 37.31	1 Piece(s)	Available	6 Day(s) or more	45	5	6.75	24.75	0.49	8.51~16.00	9.9	0.7	16.1	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	22	20.25	-
MYR 37.31	1 Piece(s)	Available	6 Day(s) or more	50	5	6.75	27.5	0.49	8.51~16.00	10.98	0.7	16.1	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	22	22.5	-
MYR 35.00	1 Piece(s)	Available	6 Day(s) or more	15	6	7.55	8.25	0.49	1.51~4.50	3.33	0.6	6	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	9	6.75	-
MYR 35.00	1 Piece(s)	Available	6 Day(s) or more	20	6	7.55	11	0.49	1.51~4.50	4.41	0.6	6	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	9	9	-
MYR 35.00	1 Piece(s)	Available	6 Day(s) or more	25	6	7.55	13.75	0.49	4.51~8.50	5.49	0.6	6	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	9	11.25	-
MYR 35.00	1 Piece(s)	Available	6 Day(s) or more	30	6	7.55	16.5	0.49	4.51~8.50	6.57	0.6	6	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	9	13.5	-
MYR 37.69	1 Piece(s)	Available	6 Day(s) or more	35	6	7.75	19.25	0.49	4.51~8.50	7.64	0.7	10.5	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	14	15.75	-
MYR 37.69	1 Piece(s)	Available	6 Day(s) or more	40	6	7.75	22	0.49	8.51~16.00	8.82	0.7	10.5	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	14	18	-
MYR 37.69	1 Piece(s)	Available	6 Day(s) or more	45	6	7.75	24.75	0.49	8.51~16.00	9.9	0.7	10.5	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	14	20.25	-
MYR 37.69	1 Piece(s)	Available	6 Day(s) or more	50	6	7.95	27.5	0.49	8.51~16.00	10.98	0.8	18.4	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	22	22.5	-
MYR 37.69	1 Piece(s)	Available	6 Day(s) or more	55	6	7.95	30.25	0.49	8.51~16.00	12.05	0.8	18.4	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	22	24.75	-
MYR 37.69	1 Piece(s)	Available	6 Day(s) or more	60	6	7.95	33	0.49	8.51~16.00	13.23	0.8	18.4	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	22	27	-
MYR 35.00	1 Piece(s)	Available	6 Day(s) or more	20	8	9.75	11	0.49	1.51~4.50	4.41	0.7	6	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	7.5	9	-
MYR 35.00	1 Piece(s)	Available	6 Day(s) or more	25	8	9.75	13.75	0.49	4.51~8.50	5.49	0.7	6	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	7.5	11.25	-
MYR 35.00	1 Piece(s)	Available	6 Day(s) or more	30	8	9.75	16.5	0.49	4.51~8.50	6.57	0.7	6	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	7.5	13.5	-
MYR 39.23	1 Piece(s)	Available	6 Day(s) or more	35	8	9.95	19.25	0.49	4.51~8.50	7.64	0.8	10	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	11.5	15.75	-
MYR 39.23	1 Piece(s)	Available	6 Day(s) or more	40	8	9.95	22	0.49	8.51~16.00	8.82	0.8	10	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	11.5	18	-
MYR 39.23	1 Piece(s)	Available	6 Day(s) or more	45	8	9.95	24.75	0.49	8.51~16.00	9.9	0.8	10	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	11.5	20.25	-
MYR 39.23	1 Piece(s)	Available	6 Day(s) or more	50	8	9.95	27.5	0.49	8.51~16.00	10.98	0.8	10	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	11.5	22.5	-
MYR 41.92	1 Piece(s)	Available	6 Day(s) or more	55	8	10.35	30.25	0.49	8.51~16.00	12.05	1	24	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	23	24.75	23
MYR 41.92	1 Piece(s)	Available	6 Day(s) or more	60	8	10.35	33	0.49	8.51~16.00	13.23	1	24	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	23	27	23
MYR 41.92	1 Piece(s)	Available	6 Day(s) or more	65	8	10.35	35.75	0.49	8.51~16.00	14.31	1	24	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	23	29.25	23
MYR 41.92	1 Piece(s)	Available	6 Day(s) or more	70	8	10.35	38.5	0.49	8.51~16.00	15.39	1	24	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	23	31.5	23
MYR 41.92	1 Piece(s)	Available	6 Day(s) or more	80	8	10.35	44	0.49	16.01~30.00	17.64	1	24	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	23	36	23
MYR 35.38	1 Piece(s)	Available	6 Day(s) or more	20	10	12.05	11	0.49	1.51~4.50	4.41	0.8	6.4	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	7	9	-
MYR 35.38	1 Piece(s)	Available	6 Day(s) or more	25	10	12.05	13.75	0.49	4.51~8.50	5.49	0.8	6.4	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	7	11.25	-
MYR 40.00	1 Piece(s)	Available	6 Day(s) or more	30	10	12.05	16.5	0.49	4.51~8.50	6.57	0.8	6.4	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	7	13.5	-
MYR 40.00	1 Piece(s)	Available	6 Day(s) or more	35	10	12.25	19.25	0.49	4.51~8.50	7.64	0.9	9.9	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	10	15.75	-
MYR 40.00	1 Piece(s)	Available	6 Day(s) or more	40	10	12.25	22	0.49	8.51~16.00	8.82	0.9	9.9	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	10	18	-
MYR 40.00	1 Piece(s)	Available	6 Day(s) or more	45	10	12.25	24.75	0.49	8.51~16.00	9.9	0.9	9.9	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	10	20.25	-
MYR 40.00	1 Piece(s)	Available	6 Day(s) or more	50	10	12.25	27.5	0.49	8.51~16.00	10.98	0.9	9.9	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	10	22.5	-
MYR 43.08	1 Piece(s)	Available	6 Day(s) or more	55	10	12.65	30.25	0.49	8.51~16.00	12.05	1.1	21.5	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	18.5	24.75	-
MYR 43.08	1 Piece(s)	Available	6 Day(s) or more	60	10	12.65	33	0.49	8.51~16.00	13.23	1.1	21.5	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	18.5	27	-
MYR 43.08	1 Piece(s)	Available	6 Day(s) or more	65	10	12.65	35.75	0.49	8.51~16.00	14.31	1.1	21.5	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	18.5	29.25	-
MYR 43.08	1 Piece(s)	Available	6 Day(s) or more	70	10	12.65	38.5	0.49	8.51~16.00	15.39	1.1	21.5	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	18.5	31.5	-
MYR 43.08	1 Piece(s)	Available	6 Day(s) or more	80	10	12.65	44	0.49	16.01~30.00	17.64	1.1	21.5	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	18.5	36	-
MYR 40.00	1 Piece(s)	Available	6 Day(s) or more	25	12	14.45	13.75	0.49	4.51~8.50	5.49	1	10	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	9	11.25	-
MYR 40.00	1 Piece(s)	Available	6 Day(s) or more	30	12	14.45	16.5	0.49	4.51~8.50	6.57	1	10	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	9	13.5	-
MYR 41.92	1 Piece(s)	Available	6 Day(s) or more	35	12	14.45	19.25	0.49	4.51~8.50	7.64	1	10	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	9	15.75	-
MYR 41.92	1 Piece(s)	Available	6 Day(s) or more	40	12	14.45	22	0.49	8.51~16.00	8.82	1	10	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	9	18	-
MYR 41.92	1 Piece(s)	Available	6 Day(s) or more	45	12	14.45	24.75	0.49	8.51~16.00	9.9	1	10	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	9	20.25	-
MYR 41.92	1 Piece(s)	Available	6 Day(s) or more	50	12	14.65	27.5	0.49	8.51~16.00	10.98	1.1	14.9	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	12.5	22.5	-
MYR 43.08	1 Piece(s)	Available	6 Day(s) or more	55	12	14.65	30.25	0.49	8.51~16.00	12.05	1.1	14.9	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	12.5	24.75	-
MYR 43.08	1 Piece(s)	Available	6 Day(s) or more	60	12	14.65	33	0.49	8.51~16.00	13.23	1.1	14.9	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	12.5	27	-
MYR 43.08	1 Piece(s)	Available	6 Day(s) or more	65	12	14.65	35.75	0.49	8.51~16.00	14.31	1.1	14.9	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	12.5	29.25	-
MYR 43.08	1 Piece(s)	Available	6 Day(s) or more	70	12	14.85	38.5	0.49	8.51~16.00	15.39	1.2	21.6	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	17	31.5	-
MYR 45.00	1 Piece(s)	Available	6 Day(s) or more	80	12	14.85	44	0.49	16.01~30.00	17.64	1.2	21.6	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	17	36	-
MYR 45.00	1 Piece(s)	Available	6 Day(s) or more	90	12	14.85	49.5	0.49	16.01~30.00	19.8	1.2	21.6	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	17	40.5	-
MYR 41.92	1 Piece(s)	Available	6 Day(s) or more	35	16	18.85	19.25	0.49	4.51~8.50	7.64	1.2	11.4	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	8.5	15.75	-
MYR 41.92	1 Piece(s)	Available	6 Day(s) or more	40	16	18.85	22	0.49	8.51~16.00	8.82	1.2	11.4	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	8.5	18	-
MYR 41.92	1 Piece(s)	Available	6 Day(s) or more	45	16	18.85	24.75	0.49	8.51~16.00	9.9	1.2	11.4	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	8.5	20.25	-
MYR 41.92	1 Piece(s)	Available	6 Day(s) or more	50	16	18.85	27.5	0.49	8.51~16.00	10.98	1.2	11.4	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	8.5	22.5	-
MYR 45.00	1 Piece(s)	Available	6 Day(s) or more	55	16	19.05	30.25	0.49	8.51~16.00	12.05	1.3	16.3	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	11.5	24.75	-
MYR 45.00	1 Piece(s)	Available	6 Day(s) or more	60	16	19.05	33	0.49	8.51~16.00	13.23	1.3	16.3	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	11.5	27	-
MYR 46.92	1 Piece(s)	Available	6 Day(s) or more	65	16	19.05	35.75	0.49	8.51~16.00	14.31	1.3	16.3	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	11.5	29.25	-
MYR 46.92	1 Piece(s)	Available	6 Day(s) or more	70	16	19.25	38.5	0.49	8.51~16.00	15.39	1.4	21	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	14	31.5	-
MYR 49.23	1 Piece(s)	Available	6 Day(s) or more	80	16	19.25	44	0.49	16.01~30.00	17.64	1.4	21	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	14	36	-
MYR 49.23	1 Piece(s)	Available	6 Day(s) or more	90	16	19.25	49.5	0.49	16.01~30.00	19.8	1.4	21	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	14	40.5	-
MYR 49.23	1 Piece(s)	Available	6 Day(s) or more	100	16	19.25	55	0.49	16.01~30.00	22.05	1.4	21	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	14	45	-
MYR 35.00	1 Piece(s)	Available	6 Day(s) or more	10	5	6.55	6	0.98	1.51~4.50	3.92	0.6	4.8	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	7	4	-
MYR 35.00	1 Piece(s)	Available	6 Day(s) or more	15	5	6.55	9	0.98	4.51~8.50	5.88	0.6	4.8	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	7	6	-
MYR 35.00	1 Piece(s)	Available	6 Day(s) or more	20	5	6.55	12	0.98	4.51~8.50	7.84	0.6	4.8	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	7	8	-
MYR 35.00	1 Piece(s)	Available	6 Day(s) or more	25	5	6.75	15	0.98	8.51~16.00	9.8	0.7	9.1	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	12	10	-
MYR 35.00	1 Piece(s)	Available	6 Day(s) or more	30	5	6.75	18	0.98	8.51~16.00	11.76	0.7	9.1	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	12	12	-
MYR 37.69	1 Piece(s)	Available	6 Day(s) or more	35	5	6.75	21	0.98	8.51~16.00	13.72	0.7	9.1	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	12	14	-
MYR 37.69	1 Piece(s)	Available	6 Day(s) or more	40	5	6.95	24	0.98	8.51~16.00	15.68	0.8	16	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	19	16	-
MYR 37.69	1 Piece(s)	Available	6 Day(s) or more	45	5	6.95	27	0.98	16.01~30.00	17.64	0.8	16	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	19	18	-
MYR 37.69	1 Piece(s)	Available	6 Day(s) or more	50	5	6.95	30	0.98	16.01~30.00	19.6	0.8	16	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	19	20	-
MYR 35.38	1 Piece(s)	Available	6 Day(s) or more	15	6	7.75	9	0.98	4.51~8.50	5.88	0.7	6.3	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	8	6	-
MYR 35.38	1 Piece(s)	Available	6 Day(s) or more	20	6	7.75	12	0.98	4.51~8.50	7.84	0.7	6.3	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	8	8	-
MYR 35.38	1 Piece(s)	Available	6 Day(s) or more	25	6	7.95	15	0.98	8.51~16.00	9.8	0.8	10.4	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	12	10	-
MYR 35.38	1 Piece(s)	Available	6 Day(s) or more	30	6	7.95	18	0.98	8.51~16.00	11.76	0.8	10.4	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	12	12	-
MYR 38.08	1 Piece(s)	Available	6 Day(s) or more	35	6	7.95	21	0.98	8.51~16.00	13.72	0.8	10.4	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	12	14	-
MYR 38.08	1 Piece(s)	Available	6 Day(s) or more	40	6	8.15	24	0.98	8.51~16.00	15.68	0.9	16.2	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	17	16	-
MYR 38.08	1 Piece(s)	Available	6 Day(s) or more	45	6	8.15	27	0.98	16.01~30.00	17.64	0.9	16.2	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	17	18	-
MYR 38.08	1 Piece(s)	Available	6 Day(s) or more	50	6	8.15	30	0.98	16.01~30.00	19.6	0.9	16.2	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	17	20	-
MYR 38.08	1 Piece(s)	Available	6 Day(s) or more	55	6	8.15	33	0.98	16.01~30.00	21.56	0.9	16.2	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	17	22	-
MYR 38.08	1 Piece(s)	Available	6 Day(s) or more	60	6	8.15	36	0.98	16.01~30.00	23.52	0.9	16.2	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	17	24	-
MYR 35.38	1 Piece(s)	Available	6 Day(s) or more	20	8	10.15	12	0.98	4.51~8.50	7.84	0.9	9.5	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	9.5	8	-
MYR 35.38	1 Piece(s)	Available	6 Day(s) or more	25	8	10.15	15	0.98	8.51~16.00	9.8	0.9	9.5	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	9.5	10	-
MYR 35.38	1 Piece(s)	Available	6 Day(s) or more	30	8	10.35	18	0.98	8.51~16.00	11.76	1	14	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	13	12	-
MYR 39.62	1 Piece(s)	Available	6 Day(s) or more	35	8	10.35	21	0.98	8.51~16.00	13.72	1	14	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	13	14	-
MYR 39.62	1 Piece(s)	Available	6 Day(s) or more	40	8	10.35	24	0.98	8.51~16.00	15.68	1	14	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	13	16	-
MYR 39.62	1 Piece(s)	Available	6 Day(s) or more	45	8	10.35	27	0.98	16.01~30.00	17.64	1	14	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	13	18	-
MYR 39.62	1 Piece(s)	Available	6 Day(s) or more	50	8	10.35	30	0.98	16.01~30.00	19.6	1	14	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	13	20	-
MYR 42.31	1 Piece(s)	Available	6 Day(s) or more	55	8	10.35	33	0.98	16.01~30.00	21.56	1	14	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	13	22	-
MYR 42.31	1 Piece(s)	Available	6 Day(s) or more	60	8	10.75	36	0.98	16.01~30.00	23.52	1.2	28.8	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	23	24	23
MYR 42.31	1 Piece(s)	Available	6 Day(s) or more	65	8	10.75	39	0.98	16.01~30.00	25.48	1.2	28.8	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	23	26	23
MYR 42.31	1 Piece(s)	Available	6 Day(s) or more	70	8	10.75	42	0.98	16.01~30.00	27.44	1.2	28.8	Electrolytic Polishing + Precision Cleaning	General / For Clean Environments / For Vacuum Equipment	With Grinding	23	28	23

Basic Information

Material	SUS304-WPB	Type	Round Wire	Characteristics/Applications	Clean washed
Environmentally friendly	RoHS Compliant (10 Substances)

Configure

795 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Free Length L(mm)
10

15

20

25

30

35

40

45

50

55

60

65

70

80

90

100
Clear
Inner Dia. D-2d (or D)(Ø)
5

6

8

10

12

16
Clear
Outer Dia. D (or D1)(Ø)
6.15

6.25

6.35

6.45

6.55

6.75

6.95

7.15

7.35

7.45

7.55

7.65

7.75

7.95

8.15

8.35

8.75

8.95

9.65

9.75

9.95

10.15

10.35

10.55

10.75

10.95

11.35

11.85

11.95

12.05

12.25

12.45

12.65

12.85

13.05

13.45

13.85

14.05

14.25

14.45

14.65

14.85

15.25

15.65

15.85

16.05

18.45

18.65

18.85

19.05

19.25

19.45

19.85

20.05

20.85
Clear
Height with the max. load applied ([Free Length] – [Allowable Deflection])(mm)
6

6.25

8

8.25

9

9.75

10

11

12

13

13.75

14

15

16

16.25

16.5

18

19.25

19.5

20

21

22

22.75

24

24.75

26

27

27.5

28

29.25

30

30.25

32

32.5

33

35.75

36

38.5

39

40

42

42.25

44

45.5

48

49.5

52

54

55

58.5

60

65
Clear
Spring Constant(N/mm)
0.098

0.29

0.49

0.98

1.96

2.94
Clear
Allowable Load (Configurable Range)(N)
- 1.51~4.50
- 4.51~8.50
- 8.51~16.00
- 16.01~30.00
- 30.01~50.00
- 50.01~73.00
- 73.01~107.00
Clear
Max. Load(N)
1.84

2.65

3.33

3.53

3.92

4.41

5.29

5.49

5.88

6.17

6.57

7.06

7.64

7.84

7.94

8.82

9.7

9.8

9.9

10.58

10.59

10.98

11.47

11.76

12.05

12.35

12.36

12.6

13.23

13.72

14.11

14.12

14.31

15.39

15.68

15.88

17.64

19.6

19.8

20.58

21.56

22.05

23.52

25.48

25.68

27.44

30.87

31.36

35.28

35.97

39.2

41.16

46.26

51.45

56.55

61.74

62.72

66.84

72.03

82.32

92.61

102.90
Clear
Wire Dia.(Ø)
0.4

0.45

0.5

0.55

0.6

0.65

0.7

0.75

0.8

0.9

1

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

2.2
Clear
Solid Length(mm)
4.3

4.8

5

5.6$8.6

5.8

6

6.3

6.4

6.8

6.8$7.5

7.2

7.2$6.6

7.5

7.7

8.3$7.5

8.4

8.5

8.8

9.0$10.2

9.1

9.1$9.8

9.5

9.6$11.0

9.8

9.9

10

10.4

10.5

11

11.3

11.4

11.7

12.6

12.7

13.2

13.3$14.3

13.8$15.6

14

14.4

14.5

14.9

15.6

15.8

16

16.1

16.2

16.3

16.8

17

18

18.2

18.4

18.8

21

21.5

21.6

21.7

22

23.4

24

24.7

25.3

25.4

26

27.2

27.8

28.6

28.8

28.9

29.9
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Clear
Applications
- General
- For Clean Environments
- For Vacuum Equipment
Clear
End Face State
- With Grinding
- Without Grinding
Clear
Total Coils Nt *Reference Value
6

7

7.5

8

8.5

9

9.5

10

10.5

11

11.5

12

12.5

13

13.5

14

14.5

15

16

16.5

17

17.5

18.5

19

19.5

19.75

20

21

22

23

25

31
Clear
type
- SH-VUF
- SH-VUL
- SH-VUM
- SH-VUR
- SH-VUT
- SH-VUY
- SHD-VUF
- SHD-VUL
- SHD-VUM
- SHD-VUR
- SHD-VUT
- SHD-VUY
- SL-VUF
- SL-VUL
- SL-VUM
- SL-VUR
- SL-VUT
- SL-VUY
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]Round Wire Coil Springs - I.D. Referenced (Part Numbers)

(i)Caution

Specification Table

Cautions/Prohibitions

Part Number

Basic Information

Configure

Specification/Dimensions

Free Length L(mm)

Inner Dia. D-2d (or D)(Ø)

Outer Dia. D (or D1)(Ø)

Height with the max. load applied ([Free Length] – [Allowable Deflection])(mm)

Spring Constant(N/mm)

Allowable Load (Configurable Range)(N)

Max. Load(N)

Wire Dia.(Ø)

Solid Length(mm)

Cleaning Method

Applications

End Face State

Total Coils Nt *Reference Value

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm