Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Cleaned & Packaged] Round Wire Coil Spring - O.D. Referenced, Stainless Steel, UY/UR/UF (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

·Degreasing (Anti-rust single packing)	: Part Number SL-□□
·Precision cleaning (Degassing double packing)	: Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

O.D. D

ø10 or Less 0 0.5 mm
ø12 or More 0 -0.8 mm

Free Length L

50 or Less ±1.5 mm
55 or More ±2.5 mm

Closed Ends (Both Ends Not Ground*)

Closed Ends (Both Ends Ground)

Type				Body Material	Cleaning Method
Max. Deflection (Fmax.)				Body Material	Cleaning Method
F = L × 70%	F = L × 75%	F = L × 60%	F = L × 45%	[M] Material	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-UV	SL-UY	SL-UR	SL-UF	SUS304−WPB (Spring constant ±10%)	Degreasing	General environment	Anti-rust packing	General environment
SH-UV	SH-UY	SH-UR	SH-UF		Precision cleaning	Class 1,000	Degassing double packing	Class 10
SHD-UV	SHD-UY	SHD-UR	SHD-UF		Electrolytic polishing + precision cleaning	Class 1,000	Degassing double packing	Class 10

[!] Maximum deflection differs from above for some sizes. See the specification table for details.
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-UY4-25

SH-UR13-60

SHD-UF8-70

■UV: Fmax. (allowable deflection) = L × Fa%

Part Number			d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UV SH-UV SHD-UV	3−	5	0.15	1.1	4	0.18 {0.018}	70
		10	0.18	2.5	7	0.35 {0.036}
		15	0.18	2.5	11	0.53 {0.054}
		20	0.20	3.3	14	0.70 {0.071}
		25	0.23	6.2	18	0.88 {0.089}
		30	0.23	6.2	21	1.05 {0.107}
	4−	5	0.18	1.2	4	0.18 {0.018}
		10	0.20	1.7	7	0.35 {0.036}
		15	0.23	3.0	11	0.53 {0.054}
		20	0.23	3.0	14	0.70 {0.071}
		25	0.26	4.9	18	0.88 {0.089}
		30	0.26	4.9	21	1.05 {0.107}
	5−	5	0.20	1.2	4	0.18 {0.018}
		10	0.23	1.8	7	0.35 {0.036}
		15	0.26	2.9	11	0.53 {0.054}
		20	0.29	4.5	14	0.70 {0.071}
		25	0.29	4.5	18	0.88 {0.089}
		30	0.29	4.5	21	1.05 {0.107}
	6−	10	0.26	2.0	7	0.35 {0.036}
		15	0.30	3.3	11	0.53 {0.054}
		20	0.30	3.3	14	0.70 {0.071}
		25	0.35	6.5	18	0.88 {0.089}
		30	0.35	6.5	21	1.05 {0.107}
		35	0.35	6.5	25	1.23 {0.125}
		40	0.35	6.5	28	1.40 {0.143}
	8−	10	0.30	1.9	7	0.35 {0.036}
		15	0.35	3.2	11	0.53 {0.054}
		20	0.35	3.2	14	0.70 {0.071}
		25	0.40	5.6	18	0.88 {0.089}
		30	0.40	5.6	21	1.05 {0.107}
		35	0.40	5.6	25	1.23 {0.125}
		40	0.45	9.3	28	1.40 {0.143}
		45	0.45	9.3	32	1.58 {0.161}
		50	0.45	9.3	35	1.75 {0.179}
	10−	10	0.35	2.2	7	0.35 {0.036}
		15	0.40	3.4	11	0.53 {0.054}
		20	0.40	3.4	14	0.70 {0.071}
		25	0.45	5.4	18	0.88 {0.090}
		30	0.45	5.4	21	1.05 {0.107}
		35	0.50	8.4	25	1.23 {0.125}
		40	0.50	8.4	28	1.40 {0.143}
		45	0.55	12.8	32	1.58 {0.161}
		50	0.55	12.8	35	1.75 {0.179}

[!] Both ends of UV, UY Type springs are not ground. [!] Usage Count: 1 million times

■UY: Fmax. (allowable deflection) = L × Fa%

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UY SH-UY SHD-UY	2-5	0.13	1.5	3	0.15 {0.015}	60
	10	0.13	1.5	6	0.29 {0.03}
	15	0.15	2.7	9	0.44 {0.045}
	20	0.15	2.7	12	0.59 {0.06}
	25	0.18	6.3	15	0.74 {0.075}
	30	0.18	6.3	18	0.88 {0.09}
	3-5	0.16	0.92	3.75	0.37 {0.0375}	75
	10	0.2	2	7.5	0.74 {0.075}
	15	0.23	3.45	11.25	1.10 {0.1125}
	20	0.23	3.45	15	1.47 {0.15}
	25	0.26	6.24	15	1.47 {0.15}	60
	30	0.26	6.24	18	1.77 {0.18}	60
	4-5	0.2	1.05	3.75	0.37 {0.0375}	75
	10	0.23	1.84	7.5	0.74 {0.075}
	15	0.26	2.86	11.25	1.10 {0.1125}
	20	0.29	4.64	15	1.47 {0.15}
	25	0.3	5.4	18.75	1.84 {0.1875}
	30	0.3	5.4	22.5	2.26 {0.23}
	5-5	0.23	1.15	3.75	0.37 {0.0375}	75
	10	0.26	1.82	7.5	0.74 {0.075}
	15	0.3	3.15	11.25	1.10 {0.1125}
	20	0.3	3.15	15	1.47 {0.15}
	25	0.32	4.16	18.75	1.84 {0.1875}
	30	0.32	4.16	22.5	2.26 {0.23}
	35	0.35	6	26.25	2.55 {0.26}
	40	0.35	6	30	2.94 {0.3}

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UY SH-UY SHD-UY	6-5	0.26	1.24	3.5	0.34 {0.035}	70
	10	0.3	2.1	7.5	0.74 {0.075}	75
	15	0.32	2.64	11.25	1.10 {0.1125}
	20	0.35	3.85	15	1.47 {0.15}
	25	0.38	5.32	18.75	1.84 {0.1875}
	30	0.4	6.8	22.5	2.21 {0.225}
	35	0.4	6.8	26.25	2.55 {0.26}
	40	0.4	6.8	30	2.94 {0.3}
	8-10	0.35	2.19	7.5	0.74 {0.075}	75
	15	0.4	3.4	11.25	1.10 {0.1125}
	20	0.4	3.4	15	1.47 {0.15}
	25	0.45	5.4	18.75	1.84 {0.1875}
	30	0.45	5.4	22.5	2.21 {0.225}
	35	0.5	8.3	26.25	2.55 {0.26}
	40	0.5	8.3	30	2.94 {0.3}
	45	0.5	8.3	33.75	3.33 {0.34}
	50	0.55	12.7	35	3.43 {0.35}	70
	10-10	0.5	3.25	6	1.18 {0.12}	60
	15	0.5	3.25	11.25	2.21 {0.225}	75
	20	0.55	4.4	15	2.94 {0.3}
	25	0.55	4.4	18.75	3.68 {0.375}
	30	0.6	6.15	22.5	4.41 {0.45}
	35	0.6	6.3	26.25	5.10 {0.52}
	40	0.6	6.3	30	5.88 {0.6}
	45	0.65	8.45	33.75	6.62 {0.675}
	50	0.65	8.45	37.5	7.35 {0.75}
	12-15	0.55	3.3	11.25	2.206 {0.225}	75
	20	0.55	3.3	15	2.942 {0.3}
	25	0.6	4.2	18.75	3.68 {0.375}
	30	0.65	5.53	22.5	4.41 {0.45}
	35	0.65	5.53	26.25	5.15 {0.525}
	40	0.7	7.35	30	5.88 {0.6}
	45	0.7	7.35	33.75	6.62 {0.675}
	50	0.7	7.35	37.5	7.35 {0.75}
	60	0.8	13.6	45	8.83 {0.9}
	70	0.8	13.6	52.5	10.30 {1.05}
	80	0.8	13.6	60	11.77 {1.2}
	13-15	0.6	3.75	10.5	2.06 {0.21}	70
	20	0.6	3.75	15	2.94 {0.3}	75
	25	0.65	4.9	18.75	3.68 {0.375}
	30	0.65	4.9	22.5	4.41 {0.45}
	35	0.7	6.3	26.25	5.15 {0.525}
	40	0.75	8.25	30	5.88 {0.6}
	45	0.75	8.25	33.75	6.62 {0.675}
	50	0.8	11.2	37.5	7.35 {0.75}
	60	0.8	11.2	45	8.83 {0.9}
	70	0.85	14.45	52.5	10.30 {1.05}
	80	0.85	14.45	60	11.77 {1.2}
	16-15	0.7	4.2	9	1.77 {0.18}	60
	20	0.7	4.2	15	2.94 {0.3}	75
	25	0.7	4.2	18.75	3.68 {0.375}
	30	0.75	5.44	22.5	4.41 {0.45}
	35	0.8	6.8	26.25	5.15 {0.525}
	40	0.8	6.8	30	5.88 {0.6}
	45	0.85	8.5	33.75	6.62 {0.675}
	50	0.9	10.8	37.5	7.35 {0.75}
	60	0.9	10.8	45	8.83 {0.9}
	70	1	17	52.5	10.30 {1.05}
	80	1	17	60	11.77 {1.2}
	20-20	0.9	5.4	12	3.53 {0.36}	60
	25	0.9	5.4	18.75	5.49 {0.56}	75
	30	0.9	5.4	22.5	6.62 {0.675}
	35	1	7.5	26.25	7.65 {0.78}
	40	1	7.5	30	8.83 {0.9}
45	1	7.5	33.75	9.90 {1.01}
50	1.1	11	37.5	11.03 {1.125}
60	1.1	11	45	13.24 {1.35}
70	1.2	15.6	52.5	15.45 {1.58}
80	1.2	15.6	60	17.65 {1.8}

[ ! ] Both ends of UY Type springs are not ground.
[!] Usage Count: 1 million times

■UR: Fmax. (allowable deflection) = L × Fa%

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UR SH-UR SHD-UR	2-5	0.18	2	2.5	0.49 {0.05}	50
	10	0.18	2	5	0.98 {0.1}
	15	0.23	6	7.5	1.5 {0.15}
	20	0.23	6	10	2.0 {0.2}
	25	0.26	11.2	12.5	2.5 {0.25}
	30	0.26	11.2	15	2.9 {0.3}
	3-5	0.23	1.6	3	0.9 {0.09}	60
	10	0.25	2.1	6	1.8 {0.18}
	15	0.3	4.5	9	2.6 {0.27}
	20	0.3	4.5	12	3.5 {0.36}
	25	0.32	6.4	15	4.4 {0.45}
	30	0.32	6.4	18	5.3 {0.54}
	35	0.35	9.8	21	6.2 {0.63}
	40	0.35	9.8	24	7.1 {0.72}
	4-5	0.26	1.4	3	0.9 {0.09}	60
	10	0.29	2	6	1.8 {0.18}
	15	0.32	3	9	2.6 {0.27}
	20	0.38	6.1	12	3.5 {0.36}
	25	0.38	6.1	15	4.4 {0.45}
	30	0.4	8	18	5.3 {0.54}
	35	0.4	8	21	6.2 {0.63}
	40	0.45	14.4	24	7.1 {0.72}
	45	0.45	14.4	27	7.9 {0.81}
	50	0.45	14.4	30	8.8 {0.9}
	60	0.5	23	36	10.6 {1.08}
	5-5	0.3	1.65	3	0.9 {0.09}	60
	10	0.35	2.71	6	1.8 {0.18}
	15	0.38	3.61	9	2.6 {0.27}
	20	0.38	3.61	12	3.5 {0.36}
	25	0.45	7.43	15	4.4 {0.45}
	30	0.45	7.43	18	5.3 {0.54}
	35	0.5	12.25	21	6.2 {0.63}
	40	0.5	12.25	24	7.1 {0.72}
	45	0.5	12.25	27	7.9 {0.81}
	50	0.55	19.53	30	8.8 {0.9}
	60	0.55	19.53	36	10.6 {1.08}
	6-5	0.32	1.5	3	0.9 {0.09}	60
	10	0.4	3	6	1.8 {0.18}
	15	0.4	3	9	2.6 {0.27}
	20	0.5	7	12	3.5 {0.36}
	25	0.5	7	15	4.4 {0.45}
	30	0.5	7	18	5.3 {0.54}
	35	0.55	11	21	6.2 {0.63}
	40	0.55	11	24	7.1 {0.72}
	45	0.6	17.4	27	7.9 {0.81}
	50	0.6	17.4	30	8.8 {0.9}
	60	0.65	23.4	36	10.6 {1.08}
	70	0.65	23.4	42	12.4 {1.26}
	8-10	0.45	2.6	6	1.8 {0.18}	60
	15	0.5	3.6	9	2.6 {0.27}
	20	0.5	3.6	12	3.5 {0.36}
	25	0.55	5.9	15	4.4 {0.45}
	30	0.65	10.4	18	5.3 {0.54}
	35	0.65	10.4	21	6.2 {0.63}
	40	0.7	15.4	24	7.1 {0.72}
	45	0.75	21	22	6.3 {0.66}	50
	50	0.75	21	27	7.8 {0.81}	55
	60	0.8	27.6	31	8.9 {0.93}	52
	70	0.8	27.6	40	11.6 {1.20}	57
	80	0.8	27.6	48	14.1 {1.44}	60

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UR SH-UR SHD-UR	10-10	0.55	3.3	6	1.8 {0.18}	60
	15	0.6	4.2	9	2.6 {0.27}
	20	0.65	6.2	12	3.5 {0.36}
	25	0.65	6.2	15	4.4 {0.45}
	30	0.7	8.4	18	5.3 {0.54}
	35	0.7	8.4	21	6.2 {0.63}
	40	0.7	8.4	24	7.1 {0.72}
	45	0.8	15.2	27	7.9 {0.81}
	50	0.8	15.2	30	8.8 {0.9}
	60	0.85	20.4	36	10.6 {1.08}
	70	0.85	20.4	42	12.4 {1.26}
	80	0.85	20.4	48	14.1 {1.44}
	12-15	0.6	3.5	9	2.6 {0.27}	60
	20	0.7	5.6	12	3.5 {0.36}
	25	0.7	5.6	15	4.4 {0.45}
	30	0.8	9.6	18	5.3 {0.54}
	35	0.8	9.6	21	6.2 {0.63}
	40	0.8	9.6	24	7.1 {0.72}
	45	0.9	16.2	27	7.9 {0.81}
	50	0.9	16.2	30	8.8 {0.9}
	60	0.9	16.2	36	10.6 {1.08}
	70	1	26	42	12.4 {1.26}
	80	1	26	48	14.1 {1.44}
	13-15	0.7	4.7	9	2.6 {0.27}	60
	20	0.7	4.7	12	3.5 {0.36}
	25	0.8	8	15	4.4 {0.45}
	30	0.8	8	18	5.3 {0.54}
	35	0.8	8	21	6.2 {0.63}
	40	0.9	12.8	24	7.1 {0.72}
	45	0.9	12.8	27	7.9 {0.81}
	50	0.9	12.8	30	8.8 {0.9}
	60	1	21	36	10.6 {1.08}
	70	1	21	42	12.4 {1.26}
	80	1	21	48	14.1 {1.44}
	16-15	0.75	4.3	9	2.6 {0.27}	60
	20	0.8	5.4	12	3.5 {0.36}
	25	0.9	7.7	15	4.4 {0.45}
	30	0.9	7.7	18	5.3 {0.54}
	35	1	12	21	6.2 {0.63}
	40	1	12	24	7.1 {0.72}
	45	1	12	27	7.9 {0.81}
	50	1.1	19	30	8.8 {0.9}
	60	1.1	19	36	10.6 {1.08}
	70	1.2	26.4	42	12.4 {1.26}
	80	1.2	26.4	48	14.1 {1.44}
	20-20	1	6	12	5.9 {0.6}	60
	25	1.1	7.7	15	7.4 {0.75}
	30	1.1	7.7	18	8.8 {0.9}
	35	1.2	10.8	21	10.3 {1.05}
	40	1.2	10.8	24	11.8 {1.2}
	45	1.3	14.3	27	13.2 {1.35}
	50	1.3	14.3	30	14.7 {1.5}
	60	1.4	19.6	36	17.7 {1.8}
	70	1.4	19.6	42	20.6 {2.1}
	80	1.5	27	48	23.5 {2.4}

[ ! ] Both ends of UR Type springs are not ground.
[!] Usage Count: 1 million times

■UF: Fmax. (allowable deflection) = L × 45%

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.
SL-UF SH-UF SHD-UF	2-5*	0.2	2.35	2.25	0.66 {0.068}
	10*	0.2	2.35	4.5	1.3 {0.14}
	15*	0.26	7.8	6.7	2.0 {0.20}
	20*	0.26	7.8	9	2.7 {0.27}
	25*	0.29	13.6	11.2	3.3 {0.34}
	30*	0.29	13.6	13.5	4.0 {0.41}
	3-5*	0.26	1.8	2.25	1.1 {0.11}
	10*	0.32	4.5	4.5	2.2 {0.22}
	15*	0.32	4.5	6.7	3.2 {0.33}
	20*	0.35	6.3	9	4.4 {0.45}
	25*	0.35	6.3	11.2	5.5 {0.56}
	30*	0.4	12.4	13.5	6.6 {0.67}
	35*	0.4	12.4	15.7	7.6 {0.78}
	40*	0.4	12.4	18	8.8 {0.9}
	4-5*	0.32	2	2.25	1.1 {0.11}
	10*	0.35	3	4.5	2.2 {0.22}
	15*	0.4	5.2	6.7	3.2 {0.33}
	20*	0.4	5.2	9	4.4 {0.45}
	25*	0.45	9.5	11.2	5.5 {0.56}
	30*	0.45	9.5	13.5	6.6 {0.67}
	35*	0.5	15.5	15.7	7.6 {0.78}
	40*	0.5	15.5	18	8.8 {0.9}
	45*	0.5	15.5	20	9.8 {1}
	50*	0.5	15.5	22.5	10.8 {1.1}
	60*	0.55	22.6	27	12.7 {1.3}
	5-5*	0.35	2.01	2.25	1.1 {0.11}
	10*	0.4	3.2	4.5	2.2 {0.23}
	15*	0.4	3.2	6.75	3.3 {0.34}
	20*	0.45	4.95	9	4.4 {0.45}
	25*	0.45	4.95	11.25	5.5 {0.56}
	30*	0.5	7.75	13.5	6.7 {0.68}
	35*	0.5	7.75	15.75	7.7 {0.79}
	40	0.6	19.5	18	8.8 {0.9}
	45	0.6	19.5	20.25	10 {1.01}
	50	0.6	19.5	22.5	11.2 {1.13}
	60	0.65	27.95	27	13.4 {1.35}
	6-5*	0.4	2.2	2.25	1.1 {0.11}
	10*	0.5	5	4.5	2.2 {0.22}
	15*	0.55	7.7	6.7	3.2 {0.33}
	20*	0.55	7.7	9	4.4 {0.45}
	25	0.6	10.8	11.2	5.5 {0.56}
	30	0.65	15.6	13.5	6.6 {0.67}
	35	0.65	15.6	15.7	7.6 {0.78}
	40	0.65	15.6	18	8.8 {0.9}
	45	0.65	15.6	20	9.8 {1}
	50	0.7	23.1	22.5	10.8 {1.1}
	60	0.7	23.1	27	12.7 {1.3}
	70	0.75	30.8	31.5	14.7 {1.5}
	8-10	0.6	5.4	4.5	2.2 {0.22}
	15	0.65	7.2	6.7	3.2 {0.33}
	20	0.7	10.5	9	4.4 {0.45}
	25	0.7	10.5	11.2	5.5 {0.56}
	30	0.75	13.5	13.5	6.6 {0.67}
	35	0.75	13.5	15.7	7.6 {0.78}
	40	0.8	18.4	18	8.8 {0.9}
	45	0.8	18.4	20	9.8 {1}
	50	0.8	18.4	22.5	10.8 {1.1}
	60	0.85	26.4	27	12.7 {1.3}
	70	0.85	26.4	31.5	14.7 {1.5}
	80	0.85	26.4	36	17.7 {1.8}

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.
SL-UF SH-UF SHD-UF	10-10	0.65	4.6	4.5	2.2 {0.22}
	15	0.65	4.6	6.7	3.2 {0.33}
	20	0.8	9.6	9	4.4 {0.45}
	25	0.8	9.6	11.2	5.5 {0.56}
	30	0.85	12.8	13.5	6.6 {0.67}
	35	0.85	12.8	15.7	7.6 {0.78}
	40	0.9	17	18	8.8 {0.9}
	45	0.9	17	20	9.8 {1}
	50	0.9	17	22.5	10.8 {1.1}
	60	1	28	27	12.7 {1.3}
	70	1	28	31.5	14.7 {1.5}
	80	1	28	36	17.7 {1.8}
	12-15	0.8	6.8	6.7	3.2 {0.33}
	20	0.8	6.8	9	4.4 {0.45}
	25	0.8	6.8	11.2	5.5 {0.56}
	30	0.9	10.8	13.5	6.6 {0.67}
	35	1	17	15.7	7.6 {0.78}
	40	1	17	18	8.8 {0.9}
	45	1	17	20	9.8 {1}
	50	1.1	26.4	22.5	10.8 {1.1}
	60	1.1	26.4	27	12.7 {1.3}
	70	1.1	26.4	31.5	14.7 {1.5}
	80	1.2	39.6	36	17.7 {1.8}
	13-15	0.8	5.6	6.7	3.2 {0.33}
	20	0.8	5.6	9	4.4 {0.45}
	25	0.85	7.2	11.2	5.5 {0.56}
	30	1	14	13.5	6.6 {0.67}
	35	1	14	15.7	7.6 {0.78}
	40	1	14	18	8.8 {0.9}
	45	1.1	21.5	20	9.8 {1}
	50	1.1	21.5	22.5	10.8 {1.1}
	60	1.1	21.5	27	12.7 {1.3}
	70	1.2	30	31.5	14.7 {1.5}
	80	1.2	30	36	17.7 {1.8}
	16-15	0.9	5.6	6.7	3.2 {0.33}
	20	1	7.7	9	4.4 {0.45}
	25	1	7.7	11.2	5.5 {0.56}
	30	1.1	12.1	13.5	6.6 {0.67}
	35	1.1	12.1	15.7	7.6 {0.78}
	40	1.2	18	18	8.8 {0.9}
	45	1.2	18	20	9.8 {1}
	50	1.2	18	22.5	10.8 {1.1}
	60	1.3	26	27	12.7 {1.3}
	70	1.3	26	31.5	14.7 {1.5}
	80	1.4	35	36	17.7 {1.8}
	20-20	1.2	7.2	9	8.8 {0.9}
	25	1.3	9.1	11.3	11.1 {1.13}
	30	1.4	11.9	13.5	13.2 {1.35}
	35	1.4	11.9	15.8	15.5 {1.58}
	40	1.5	15.8	18	17.7 {1.8}
	45	1.5	15.8	20.3	19.9 {2.03}
	50	1.6	20.8	22.5	22.1 {2.25}
	60	1.6	20.8	27	26.5 {2.7}
	70	1.7	26.4	31.5	30.9 {3.15}
	80	1.7	26.4	36	35.3 {3.6}

[ ! ] Both ends of * marked UF Type springs are not ground.
[!] Usage Count: 1 million times

kgf (load) = N⋅mm (spring constant) × 0.101972 × F (Deflection)
[kgf]=N × 0.101972

● How to calculate the number of coils (reference value):
Total coils = solid length / wire diameter (d) - 1
Number of active coils = total coils - 2
* The values of the number of coils are for reference only. There may be some variations depending on the lot.

[!] The values of solid length are for reference only. There may be some variations depending on the lot.
Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).

■Spring Constant (N/mm) [kgf/mm]
[ ! ] D12 is applicable to UY, UR, and UF Types only.

Type

SL-UV

SL-UY

SL-UR

SL-UF

SL-UM

SL-UH

SH-UV

SH-UY

SH-UR

SH-UF

SH-UM

SH-UH

SHD-UV

SHD-UY

SHD-UR

SHD-UF

SHD-UM

SHD-UH

0.05 {0.005}

0.2 {0.02}

0.3 {0.03}

0.05
{0.005}

0.098
{0.01}

0.29
{0.03}

0.49
{0.05}

2
{0.2}

2.9 {0.3}

2.9
{0.3}

5.9
{0.6}

0.2
{0.02}

9.8
{1.0}

0.3 {0.03}

0.5 {0.05}

0.98 {0.1}

4.9 {0.5}

14.7 {1.5}

Fmax.

F = L × 70%

F = L × Fa%

F = L × 45%

F = L × Fa%

Cleaning Process
·Degreasing (Part Number: SL-□□)

Working Environment: General environment
Alkaline warm pure water		Ultrasonic pure water cleaning after cleaning with pure water *3 times		Dry		Anti-rust single packing

·Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a class 10 clean environment

·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
SL-UF4-45
SL-UF4-50
SL-UF4-60
SL-UF5-40
SL-UF5-45
SL-UF5-50
SL-UF5-60
SL-UF6-40
SL-UF6-45
SL-UF6-50
SL-UF6-60
SL-UF6-70
SL-UF8-40
SL-UF8-45
SL-UF8-50
SL-UF8-60
SL-UF8-70
SL-UF10-40
SL-UF10-45
SL-UF10-50
SL-UF10-60
SL-UF10-70
SL-UF12-40
SL-UF12-45
SL-UF12-50
SL-UF12-60
SL-UF12-70
SL-UF13-40
SL-UF13-45
SL-UF13-50
SL-UF13-60
SL-UF13-70
SL-UF16-40
SL-UF16-45
SL-UF16-50
SL-UF16-60
SL-UF16-70
SL-UF20-20
SL-UF20-25
SL-UF20-30
SL-UF20-35
SL-UR4-50
SL-UR4-60
SL-UR5-50
SL-UR5-60
SL-UR6-50
SL-UR6-60
SL-UR6-70
SL-UR8-50
SL-UR8-60
SL-UR8-70
SL-UR8-80
SL-UR10-50
SL-UR10-60
SL-UR10-70
SL-UR10-80
SL-UR12-50
SL-UR12-60
SL-UR12-70
SL-UR12-80
SL-UR13-50
SL-UR13-60
SL-UR13-70
SL-UR13-80
SL-UR16-50
SL-UR16-60
SL-UR16-70
SL-UR16-80
SL-UR20-30
SL-UR20-35
SL-UR20-40
SL-UR20-45
SL-UR20-50
SL-UY12-60
SL-UY12-70
SL-UY12-80
SL-UY13-60
SL-UY13-70
SL-UY13-80
SL-UY16-60
SL-UY16-70
SL-UY16-80
SL-UY20-40
SL-UY20-45
SL-UY20-50
SL-UY20-60
SL-UY20-70

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Free Length L (mm)	Outer Dia. D (or D1) (Ø)	Spring Constant (N/mm)	Allowable Load (Configurable Range) (N)	Max. Load (N)	Wire Dia. (Ø)	Solid Length (mm)	Cleaning Method	Applications	Allowable Displacement (mm)	End Face State	Maximum Height when Loaded (Free Length, Allowable Deflection) (mm)
MYR 19.62	1 Piece(s)	Available	6 Day(s) or more	45	4	0.49	8.51~16.00	9.8	0.5	15.5	Degreasing	General	20	No Grinding	25
MYR 19.62	1 Piece(s)	Available	6 Day(s) or more	50	4	0.49	8.51~16.00	10.8	0.5	15.5	Degreasing	General	22.52	No Grinding	27.5
MYR 19.62	1 Piece(s)	Available	6 Day(s) or more	60	4	0.49	8.51~16.00	12.7	0.55	22.6	Degreasing	General	27	No Grinding	33
MYR 20.00	1 Piece(s)	Available	6 Day(s) or more	40	5	0.49	8.51~16.00	8.8	0.6	19.5	Degreasing	General	18	With Grinding	22
MYR 20.00	1 Piece(s)	Available	6 Day(s) or more	45	5	0.49	8.51~16.00	10	0.6	19.5	Degreasing	General	20.25	With Grinding	24.75
MYR 20.00	1 Piece(s)	Available	6 Day(s) or more	50	5	0.49	8.51~16.00	11.2	0.6	19.5	Degreasing	General	22.5	With Grinding	27.5
MYR 20.77	1 Piece(s)	Available	6 Day(s) or more	60	5	0.49	8.51~16.00	13.4	0.65	27.95	Degreasing	General	27	With Grinding	33
MYR 20.00	1 Piece(s)	Available	6 Day(s) or more	40	6	0.49	8.51~16.00	8.8	0.65	15.6	Degreasing	General	18	With Grinding	22
MYR 20.00	1 Piece(s)	Available	6 Day(s) or more	45	6	0.49	8.51~16.00	9.8	0.65	15.6	Degreasing	General	20	With Grinding	25
MYR 20.00	1 Piece(s)	Available	6 Day(s) or more	50	6	0.49	8.51~16.00	10.8	0.7	23.1	Degreasing	General	22.5	With Grinding	27.5
MYR 20.77	1 Piece(s)	Available	6 Day(s) or more	60	6	0.49	8.51~16.00	12.7	0.7	23.1	Degreasing	General	27	With Grinding	33
MYR 20.77	1 Piece(s)	Available	6 Day(s) or more	70	6	0.49	8.51~16.00	14.7	0.75	30.8	Degreasing	General	31.5	With Grinding	38.5
MYR 21.15	1 Piece(s)	Available	6 Day(s) or more	40	8	0.49	8.51~16.00	8.8	0.8	18.4	Degreasing	General	18	With Grinding	22
MYR 21.15	1 Piece(s)	Available	6 Day(s) or more	45	8	0.49	8.51~16.00	9.8	0.8	18.4	Degreasing	General	20	With Grinding	25
MYR 21.15	1 Piece(s)	Available	6 Day(s) or more	50	8	0.49	8.51~16.00	10.8	0.8	18.4	Degreasing	General	22.5	With Grinding	27.5
MYR 21.15	1 Piece(s)	Available	6 Day(s) or more	60	8	0.49	8.51~16.00	12.7	0.85	26.4	Degreasing	General	27	With Grinding	33
MYR 21.15	1 Piece(s)	Available	6 Day(s) or more	70	8	0.49	8.51~16.00	14.7	0.85	26.4	Degreasing	General	31.5	With Grinding	38.5
MYR 21.15	1 Piece(s)	Available	6 Day(s) or more	40	10	0.49	8.51~16.00	8.8	0.9	17	Degreasing	General	18	With Grinding	22
MYR 21.15	1 Piece(s)	Available	6 Day(s) or more	45	10	0.49	8.51~16.00	9.8	0.9	17	Degreasing	General	20	With Grinding	25
MYR 21.15	1 Piece(s)	Available	6 Day(s) or more	50	10	0.49	8.51~16.00	10.8	0.9	17	Degreasing	General	22.5	With Grinding	27.5
MYR 21.54	1 Piece(s)	Available	6 Day(s) or more	60	10	0.49	8.51~16.00	12.7	1	28	Degreasing	General	27	With Grinding	33
MYR 21.54	1 Piece(s)	Available	6 Day(s) or more	70	10	0.49	8.51~16.00	14.7	1	28	Degreasing	General	31.5	With Grinding	38.5
MYR 28.85	1 Piece(s)	Available	6 Day(s) or more	40	12	0.49	8.51~16.00	8.8	1	17	Degreasing	General	18	With Grinding	22
MYR 28.85	1 Piece(s)	Available	6 Day(s) or more	45	12	0.49	8.51~16.00	9.8	1	17	Degreasing	General	20	With Grinding	25
MYR 28.85	1 Piece(s)	Available	6 Day(s) or more	50	12	0.49	8.51~16.00	10.8	1.1	26.4	Degreasing	General	22.5	With Grinding	27.5
MYR 29.62	1 Piece(s)	Available	6 Day(s) or more	60	12	0.49	8.51~16.00	12.7	1.1	26.4	Degreasing	General	27	With Grinding	33
MYR 31.15	1 Piece(s)	Available	6 Day(s) or more	70	12	0.49	8.51~16.00	14.7	1.1	26.4	Degreasing	General	31.5	With Grinding	38.5
MYR 21.54	1 Piece(s)	Available	6 Day(s) or more	40	13	0.49	8.51~16.00	8.8	1	14	Degreasing	General	18	With Grinding	22
MYR 21.54	1 Piece(s)	Available	6 Day(s) or more	45	13	0.49	8.51~16.00	9.8	1.1	21.5	Degreasing	General	20	With Grinding	25
MYR 21.54	1 Piece(s)	Available	6 Day(s) or more	50	13	0.49	8.51~16.00	10.8	1.1	21.5	Degreasing	General	22.5	With Grinding	27.5
MYR 22.31	1 Piece(s)	Available	6 Day(s) or more	60	13	0.49	8.51~16.00	12.7	1.1	21.5	Degreasing	General	27	With Grinding	33
MYR 22.31	1 Piece(s)	Available	6 Day(s) or more	70	13	0.49	8.51~16.00	14.7	1.2	30	Degreasing	General	31.5	With Grinding	38.5
MYR 23.85	1 Piece(s)	Available	6 Day(s) or more	40	16	0.49	8.51~16.00	8.8	1.2	18	Degreasing	General	18	With Grinding	22
MYR 23.85	1 Piece(s)	Available	6 Day(s) or more	45	16	0.49	8.51~16.00	9.8	1.2	18	Degreasing	General	20	With Grinding	25
MYR 23.85	1 Piece(s)	Available	6 Day(s) or more	50	16	0.49	8.51~16.00	10.8	1.2	18	Degreasing	General	22.5	With Grinding	27.5
MYR 25.00	1 Piece(s)	Available	6 Day(s) or more	60	16	0.49	8.51~16.00	12.7	1.3	26	Degreasing	General	27	With Grinding	33
MYR 25.00	1 Piece(s)	Available	6 Day(s) or more	70	16	0.49	8.51~16.00	14.7	1.3	26	Degreasing	General	31.5	With Grinding	38.5
MYR 25.38	1 Piece(s)	Available	6 Day(s) or more	20	20	0.98	8.51~16.00	8.8	1.2	7.2	Degreasing	General	9	With Grinding	11
MYR 25.38	1 Piece(s)	Available	6 Day(s) or more	25	20	0.98	8.51~16.00	11.1	1.3	9.1	Degreasing	General	11.3	With Grinding	13.7
MYR 25.38	1 Piece(s)	Available	6 Day(s) or more	30	20	0.98	8.51~16.00	13.2	1.4	11.9	Degreasing	General	13.5	With Grinding	16.5
MYR 25.38	1 Piece(s)	Available	6 Day(s) or more	35	20	0.98	8.51~16.00	15.5	1.4	11.9	Degreasing	General	15.8	With Grinding	19.2
MYR 19.62	1 Piece(s)	Available	6 Day(s) or more	50	4	0.29	8.51~16.00	8.8	0.45	14.4	Degreasing	General	30	No Grinding	20
MYR 19.62	1 Piece(s)	Available	6 Day(s) or more	60	4	0.29	8.51~16.00	10.6	0.5	23	Degreasing	General	36	No Grinding	24
MYR 20.00	1 Piece(s)	Available	6 Day(s) or more	50	5	0.29	8.51~16.00	8.8	0.55	19.53	Degreasing	General	30	No Grinding	20
MYR 20.77	1 Piece(s)	Available	6 Day(s) or more	60	5	0.29	8.51~16.00	10.6	0.55	19.53	Degreasing	General	36	No Grinding	24
MYR 20.00	1 Piece(s)	Available	6 Day(s) or more	50	6	0.29	8.51~16.00	8.8	0.6	17.4	Degreasing	General	30	No Grinding	20
MYR 20.77	1 Piece(s)	Available	6 Day(s) or more	60	6	0.29	8.51~16.00	10.6	0.65	23.4	Degreasing	General	36	No Grinding	24
MYR 20.77	1 Piece(s)	Available	6 Day(s) or more	70	6	0.29	8.51~16.00	12.4	0.65	23.4	Degreasing	General	42	No Grinding	28
MYR 21.15	1 Piece(s)	Available	6 Day(s) or more	50	8	0.29	8.51~16.00	7.8	0.75	21	Degreasing	General	27	No Grinding	23
MYR 21.15	1 Piece(s)	Available	6 Day(s) or more	60	8	0.29	8.51~16.00	8.9	0.8	27.6	Degreasing	General	31	No Grinding	29
MYR 21.15	1 Piece(s)	Available	6 Day(s) or more	70	8	0.29	8.51~16.00	11.6	0.8	27.6	Degreasing	General	40	No Grinding	30
MYR 21.15	1 Piece(s)	Available	6 Day(s) or more	80	8	0.29	8.51~16.00	14.1	0.8	27.6	Degreasing	General	48	No Grinding	32
MYR 21.15	1 Piece(s)	Available	6 Day(s) or more	50	10	0.29	8.51~16.00	8.8	0.8	15.2	Degreasing	General	30	No Grinding	20
MYR 21.54	1 Piece(s)	Available	6 Day(s) or more	60	10	0.29	8.51~16.00	10.6	0.85	20.4	Degreasing	General	36	No Grinding	24
MYR 21.54	1 Piece(s)	Available	6 Day(s) or more	70	10	0.29	8.51~16.00	12.4	0.85	20.4	Degreasing	General	42	No Grinding	28
MYR 21.54	1 Piece(s)	Available	6 Day(s) or more	80	10	0.29	8.51~16.00	14.1	0.85	20.4	Degreasing	General	48	No Grinding	32
MYR 23.85	1 Piece(s)	Available	6 Day(s) or more	50	12	0.29	8.51~16.00	8.8	0.9	16.2	Degreasing	General	30	No Grinding	20
MYR 24.23	1 Piece(s)	Available	6 Day(s) or more	60	12	0.29	8.51~16.00	10.6	0.9	16.2	Degreasing	General	36	No Grinding	24
MYR 25.38	1 Piece(s)	Available	6 Day(s) or more	70	12	0.29	8.51~16.00	12.4	1	26	Degreasing	General	42	No Grinding	28
MYR 25.38	1 Piece(s)	Available	6 Day(s) or more	80	12	0.29	8.51~16.00	14.1	1	26	Degreasing	General	48	No Grinding	32
MYR 21.54	1 Piece(s)	Available	6 Day(s) or more	50	13	0.29	8.51~16.00	8.8	0.9	12.8	Degreasing	General	30	No Grinding	20
MYR 22.31	1 Piece(s)	Available	6 Day(s) or more	60	13	0.29	8.51~16.00	10.6	1	21	Degreasing	General	36	No Grinding	24
MYR 22.31	1 Piece(s)	Available	6 Day(s) or more	70	13	0.29	8.51~16.00	12.4	1	21	Degreasing	General	42	No Grinding	28
MYR 22.31	1 Piece(s)	Available	6 Day(s) or more	80	13	0.29	8.51~16.00	14.1	1	21	Degreasing	General	48	No Grinding	32
MYR 23.85	1 Piece(s)	Available	6 Day(s) or more	50	16	0.29	8.51~16.00	8.8	1.1	19	Degreasing	General	30	No Grinding	20
MYR 25.00	1 Piece(s)	Available	6 Day(s) or more	60	16	0.29	8.51~16.00	10.6	1.1	19	Degreasing	General	36	No Grinding	24
MYR 25.00	1 Piece(s)	Available	6 Day(s) or more	70	16	0.29	8.51~16.00	12.4	1.2	26.4	Degreasing	General	42	No Grinding	28
MYR 25.00	1 Piece(s)	Available	6 Day(s) or more	80	16	0.29	8.51~16.00	14.1	1.2	26.4	Degreasing	General	48	No Grinding	32
MYR 25.77	1 Piece(s)	Available	6 Day(s) or more	30	20	0.5	8.51~16.00	8.8	1.1	7.7	Degreasing	General	18	No Grinding	12
MYR 25.77	1 Piece(s)	Available	6 Day(s) or more	35	20	0.5	8.51~16.00	10.3	1.2	10.8	Degreasing	General	21	No Grinding	14
MYR 25.77	1 Piece(s)	Available	6 Day(s) or more	40	20	0.5	8.51~16.00	11.8	1.2	10.8	Degreasing	General	24	No Grinding	16
MYR 26.54	1 Piece(s)	Available	6 Day(s) or more	45	20	0.5	8.51~16.00	13.2	1.3	14.3	Degreasing	General	27	No Grinding	18
MYR 26.54	1 Piece(s)	Available	6 Day(s) or more	50	20	0.5	8.51~16.00	14.7	1.3	14.3	Degreasing	General	30	No Grinding	20
MYR 30.00	1 Piece(s)	Available	6 Day(s) or more	60	12	0.2	8.51~16.00	8.83	0.8	13.6	Degreasing	General	45	No Grinding	15
MYR 31.15	1 Piece(s)	Available	6 Day(s) or more	70	12	0.2	8.51~16.00	10.3	0.8	13.6	Degreasing	General	52.5	No Grinding	17.5
MYR 31.15	1 Piece(s)	Available	6 Day(s) or more	80	12	0.2	8.51~16.00	11.77	0.8	13.6	Degreasing	General	60	No Grinding	20
MYR 28.08	1 Piece(s)	Available	6 Day(s) or more	60	13	0.2	8.51~16.00	8.83	0.8	11.2	Degreasing	General	45	No Grinding	15
MYR 29.62	1 Piece(s)	Available	6 Day(s) or more	70	13	0.2	8.51~16.00	10.3	0.85	14.45	Degreasing	General	52.5	No Grinding	17.5
MYR 29.62	1 Piece(s)	Available	6 Day(s) or more	80	13	0.2	8.51~16.00	11.77	0.85	14.45	Degreasing	General	60	No Grinding	20
MYR 28.46	1 Piece(s)	Available	6 Day(s) or more	60	16	0.2	8.51~16.00	8.83	0.9	10.8	Degreasing	General	45	No Grinding	15
MYR 31.54	1 Piece(s)	Available	6 Day(s) or more	70	16	0.2	8.51~16.00	10.3	1	17	Degreasing	General	52.5	No Grinding	17.5
MYR 31.54	1 Piece(s)	Available	6 Day(s) or more	80	16	0.2	8.51~16.00	11.77	1	17	Degreasing	General	60	No Grinding	20
MYR 29.62	1 Piece(s)	Available	6 Day(s) or more	40	20	0.3	8.51~16.00	8.83	1	7.5	Degreasing	General	30	No Grinding	10
MYR 29.62	1 Piece(s)	Available	6 Day(s) or more	45	20	0.3	8.51~16.00	9.9	1	7.5	Degreasing	General	33.75	No Grinding	11.25
MYR 29.62	1 Piece(s)	Available	6 Day(s) or more	50	20	0.3	8.51~16.00	11.03	1.1	11	Degreasing	General	37.5	No Grinding	12.5
MYR 30.38	1 Piece(s)	Available	6 Day(s) or more	60	20	0.3	8.51~16.00	13.24	1.1	11	Degreasing	General	45	No Grinding	15
MYR 35.00	1 Piece(s)	Available	6 Day(s) or more	70	20	0.3	8.51~16.00	15.45	1.2	15.6	Degreasing	General	52.5	No Grinding	17.5

Basic Information

Type	Round Wire	Characteristics/Applications	Clean washed	Environmentally friendly	RoHS Compliant (10 Substances)

Configure

267 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Free Length L(mm)
5

10

15

20

25

30

35

40

45

50

60

70

80
Clear
Outer Dia. D (or D1)(Ø)
2

3

4

5

6

8

10

12

13

16

20
Clear
Spring Constant(N/mm)
0.05

0.098

0.2

0.29

0.3

0.49

0.5

0.98
Clear
Max. Load(N)
0.15

0.18

0.29

0.34

0.35

0.37

0.44

0.49

0.53

0.59

0.66

0.7

0.74

0.88

0.9

0.98

1.05

1.1

1.18

1.23

1.3

1.4

1.47

1.5

1.58

1.75

1.77

1.8

1.84

2

2.06

2.2

2.206

2.21

2.26

2.5

2.55

2.6

2.7

2.9

2.94

2.942

3.2

3.3

3.33

3.43

3.5

3.53

3.68

4

4.4

4.41

5.1

5.15

5.3

5.49

5.5

5.88

5.9

6.2

6.3

6.6

6.62

6.7

7.1

7.35

7.4

7.6

7.65

7.7

7.8

7.9

8.8

8.83

8.9

9.8

9.9

10

10.3

10.6

10.8

11.03

11.1

11.2

11.6

11.77

11.8

12.4

12.7

13.2

13.24

13.4

14.1

14.7

15.45

15.5

17.65

17.7

19.9

20.6

22.1

23.5

26.5

30.9

35.3
Clear
Wire Dia.(Ø)
0.13

0.15

0.16

0.18

0.2

0.23

0.25

0.26

0.29

0.3

0.32

0.35

0.38

0.4

0.45

0.5

0.55

0.6

0.65

0.7

0.75

0.8

0.85

0.9

1

1.1

1.2

1.3

1.4

1.5

1.6

1.7
Clear
Solid Length(mm)
0.92

1.05

1.1

1.15

1.2

1.24

1.4

1.5

1.6

1.65

1.7

1.8

1.82

1.84

1.9

2

2.01

2.1

2.19

2.2

2.35

2.5

2.6

2.64

2.7

2.71

2.86

2.9

3

3.15

3.2

3.25

3.3

3.4

3.45

3.5

3.6

3.61

3.75

3.85

4.16

4.2

4.3

4.4

4.5

4.6

4.64

4.7

4.9

4.95

5

5.2

5.32

5.4

5.44

5.53

5.6

5.9

6

6.1

6.15

6.2

6.24

6.3

6.4

6.5

6.8

7

7.2

7.35

7.43

7.5

7.7

7.75

7.8

8

8.25

8.3

8.4

8.45

8.5

9.1

9.3

9.5

9.6

9.8

10.4

10.5

10.8

11

11.2

11.9

12

12.1

12.25

12.4

12.7

12.8

13.5

13.6

14

14.3

14.4

14.45

15.2

15.4

15.5

15.6

15.8

16.2

17

17.4

18

18.4

19

19.5

19.53

19.6

20.4

20.8

21

21.5

22.6

23

23.1

23.4

26

26.4

27

27.6

27.95

28

30

30.8

35

39.6
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Clear
Applications
- General
- For Clean Environments
- For Vacuum Equipment
Clear
Allowable Displacement(mm)
2.25

2.5

3

3.5

3.75

4.5

5

6

6.7

6.75

7.5

9

10

10.5

11.2

11.25

11.3

12

12.5

13.5

15

15.7

15.75

15.8

18

18.75

20

20.25

20.3

21

22

22.5

22.52

24

26.25

27

30

31

31.5

33.75

35

36

37.5

40

42

45

48

52.5

60
Clear
End Face State
- No Grinding
- With Grinding
Clear
Maximum Height when Loaded (Free Length, Allowable Deflection)(mm)
1.25

1.5

2

2.5

2.75

3.75

4

4.5

5

5.5

6

6.25

7.5

8

8.25

8.3

8.75

10

11

11.25

12

12.5

13.7

13.75

13.8

14

15

16

16.5

17.5

18

19.2

19.25

19.3

20

22

23

24

24.7

24.75

25

27.5

28

29

30

32

33

38.5

44
Clear
type
- SH-UF
- SH-UR
- SH-UV
- SH-UY
- SHD-UF
- SHD-UR
- SHD-UV
- SHD-UY
- SL-UF
- SL-UR
- SL-UV
- SL-UY
Clear
Allowable Load (Configurable Range)(N)
- Up to 1.50
- 1.51~4.50
- 4.51~8.50
- 8.51~16.00
- 16.01~30.00
- 30.01~50.00
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Cleaned & Packaged] Round Wire Coil Spring - O.D. Referenced, Stainless Steel, UY/UR/UF (Part Numbers)

(i)Caution

Specification Table

Part Number

Basic Information

Configure

Specification/Dimensions

Free Length L(mm)

Outer Dia. D (or D1)(Ø)

Spring Constant(N/mm)

Max. Load(N)

Wire Dia.(Ø)

Solid Length(mm)

Cleaning Method

Applications

Allowable Displacement(mm)

End Face State

Maximum Height when Loaded (Free Length, Allowable Deflection)(mm)

type

Allowable Load (Configurable Range)(N)

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm