(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Sliding Door Dedicated Frames
MiSUMi Economy
- RoHS
(i)Caution
- Economy Series Cabinet Door / Window Dedicated Sealing Plate
Part Number
Configured Part Number is shown.
Product feature
1. Complies with the GB industrial aluminum profile standard, with 8 to 10μ clear anodized surface for scratch resistance.
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
Dimensional drawing
Sliding door dimensional drawing
| Type |  Material |  Surface treatment |
| LSDF-2 | 6063-T5 | Clear anodized |
| LSDF-3 | Clear anodized |
Specification overview
[Specification]
The specification table includes information such as the specified length range, unit, weight/meter, and inertial intercept.
*Any specified length between 50–4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.
The specification table includes information such as the specified length range, unit, weight/meter, and inertial intercept.
| Part Number |
| LSDF-2-1000 |
 Type |  Total length L | Profile type | Weight kg/m |
| LSDF-2 | 50–4000 (specified unit 0.5 mm) | 2 slots | 0.56 |
| LSDF-3 | 3 slots | 0.73 |
 | Type | - | L | - | (LTP·RTP·TPW) | |
| LSDF2 | - | 1000 | - | LTP |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| LSDF-2-[50-2800/0.5] |
| LSDF-3-[50-2800/0.5] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Extrusion Type | Overall Length (mm) | Weight (kg/m) |
|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) or more | ① 2-side groove | 50 ～ 2800 | 0.52 | ||
- | 1 Piece(s) | 7 Day(s) or more | ② 3-side groove | 50 ～ 2800 | 0.72 |
Loading...
Precaution
1. The profile surface is covered with a protective film. Due to adhesion from the glue, a small amount of aluminum debris may remain. This is not a quality problem, and all aluminum debris will be removed once the protective film is taken off.
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
| Accessory type | Recommended model 1 | Recommended model 2 | Recommended model 3 | Recommended model 4 |
| Nut | LNTN8-30-6-100P | LNHRN8-30-6-100P | LNSN8-30-6-100P | LTTB8-8-20-100P |
Alteration
| Alteration name | Example of alteration code | Specification drawing | Machining content / corresponding accessory |
| End face tapping (center hole) | LTP/RTP/TPW |  | Threaded holes machined on the end of the aluminum profile Accessories used for this alteration: Cup head bolt |
| Open wrench hole at fixed position | LWP/RWP |  | Concealed connection Accessories used for this alteration: Cup head bolt |
| Drill countersunk hole at specified position | Z8/XA |  | Drill a counterbored hole at any specified position on the left end face Accessories used for this alteration: Cup head bolt |
| S hole | LSH/RSH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Whistle (built-in connection) |
| M hole | LMH/RMH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Riveted connector (internal connection) |
Related product
| Recommended product 1 | Recommended product 2 | Recommended product 3 |
| Economy European standard 40 series aluminum profile, groove width 8 mm | Economy single side tabbed bracket for European standard profile with groove width of 10 mm aluminum profile | Economy PVC plate, polyvinyl chloride plate, straight |
 |  |  |
Basic Information
| Extrusion Type_ | LSDF (Sliding Door Dedeicated,Economy-Series) | Surface Treatment | Clear Anodize Processing | Extrusion Type | Rectangle Shape |
|---|---|---|---|---|---|
| Material | 6063-T5 | L Dimension Fixed, Specified | Specified |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What are the differences between the European standard aluminum profiles and the previous aluminum profiles of MISUMI, and how can they be distinguished?
-
Answer:
Differences:
① The slot width is different, and the European standard is a universal specification in China, with a slot width of 8mm for 3030 and 4040; The existing aluminum profiles of MISUMI are JIS Japanese standard specifications, with a slot width of 6mm for 3030 and 10mm for 4040, so the accessories are not universal.
② The materials are different. The European standard adopts 6063 material approved domestically; The existing aluminum profiles of MISUMI are made of Japanese specification 6N01 material.
(Read more below) - Question: What are the differences between the European standard aluminum profiles and the previous aluminum profiles of MISUMI, and how can they be distinguished?
-
Answer:
(continue) ③ The appearance standards are different. The European standard is an economic product, and there may be slight scratches, adhesion of aluminum debris, etc. on the surface. The existing aluminum profiles of MISUMI adopt JIS standard control, with higher cutting accuracy, no scratches or aluminum debris on the surface, and higher level of aesthetics and cleanliness.
Usage differentiation: For clean rooms, high-precision equipment, and other occasions with high appearance and precision requirements, it is recommended to use the existing aluminum profiles of MISUMI. - Question: Can aluminum alloy profiles be cut to a specified length? What is the cutting precision?
- Answer: Any length between 50 and 4000(mm) can be specified (Can be specified down to 0.5mm increments) for cutting, and the cutting tolerance is less than ±0.5mm.
- Question: What is the meaning of 6063-T5?
- Answer: The 6063 in the aluminum profile 6063-T5 is the grade of the aluminum alloy. The 6063 aluminum alloy is a medium strength heat treatable strengthening alloy in the AL-Mg-Si system, belonging to the sixth series alloy in the aluminum alloy. T5 is the classification identifier for heat treatment, and the first digit after the character T represents the basic type of heat treatment (from 1 to 10). T5 represents artificial aging after cooling from the forming temperature.
- Question: Can aluminum profiles be punched and processed?
- Answer: Common drilling, bevel cutting, and tapping processes in daily assembly are applicable, which are specified according to the alteration code.
- Question: What is the difference between the pre-mounted nut and post-mounted nut?
- Answer: The pre-mounted nut must be installed from the end of the profile for use in new equipment. The post-mounted nut can be placed in the profile groove from any position for use in additional equipment.
Additional Products in this Category
- 2020 / 4420, Slot Width 6mm Aluminum Frames
- 9090 , Slot Width 10mm Aluminum Frames
- 100100, Slot Width 10mm Aluminum Frames
- 2040 / 2060 / 2080, Slot Width 6mm Aluminum Frames
- 2525 / 2550, Slot Width 6mm Aluminum Frames
- 2020 Aluminum Frames Slot Width 6
- 1530 Door Frames, Slot Width 6/8mm
- 2040 Door Frames, Slot Width 8mm
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy