Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Miniature Linear Guides Long Blocks

Volume Discount

MiSUMi Economy

Miniature Linear Guides Long Blocks
These linear guides or linear slides are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 40 and 670
● Assembly Height (mm.): 8, 10, 13, and 16
● Option: Set (Rail + Block) / Block only
● Material: Rail- Bearing Steel, Block - SUS440C
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

RoHS

(i)Caution

Please expect longer LT for alteration ZA or ZB.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

Economy Miniature Linear Guide - Long Block

PrecisionVersatilityCost-effective

- Rail lengths available in multiple options

- Multiple assembly heights available

- Options for rail and block set or block only

- Constructed with Carbon Steel for durability

- Economical choice compared to standard MISUMI products

Economy Miniature Linear Guide - Long Block

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Linear guides (also known as slide rails or linear slides) are designed for precise linear motion and are used in high-precision applications. They provide higher load capacity and motion accuracy than linear bearings of the same size.
These guides use rolling elements (such as steel balls) instead of an intermediate medium, allowing for smooth, precise movement even under high load conditions. They are commonly used in equipment like CNC machines, robotics, and automated systems.

Product Comparison

	MISUMI Standard Product SSELB8-100	Economy Series E-GMLG7H-100
Material	Stainless Steel	Carbon Steel
Hardness	56HRC up	58HRC up
Basic Rated Load C (Dynamic) (kN)	1.6	1.37
Basic Rated Load Co (Static) (kN)	2.4	1.96
Static Allowable Moment MA/MB (N・m)	7.5	4.8
Static Allowable Moment MC (N・m)	9	7.64
Height H Tolerance Difference (μm)	±20	±20
Height H Pair Variation Difference (μm)	15	40
Width N Tolerance Difference (μm)	±25	±25
Width N Pair Variation Difference (μm)	20	40
Running Parallelism Guarantee (μm)*	7	15
Preload Management	Y	N
RoHS10	Compliant	Compliant

*Running parallelism varies by rail length.

Dimensional Drawing

■ Material

Type	Material		Rail Surface Treatment	Hardness	Preload
	Guide Rail	Block
*E－MLG	Bearing Steel	Stainless Steel	-	58-62HRC	Z0 Ordinary Grade No Gap Type
E－GMLG			Vacuum evaporated chrome plating
E－SMLG	Stainless Steel		-	55-58HRC
E－MLGB	-	Stainless Steel	-	-

*Set Item of Type "E-MLG" in not avaiable in some countries becuase of the concern of "rust"
E-GMLG and E-SMLG are recommendable type for long use.

Specification Table

■ Component kit

Part Number		Length L (1mm increments)	Block Dimensions (mm)									Guide Rail Dimensions (mm)
Type	Nominal Model	Length L (1mm increments)	W	B	B₁	L₁	L₂	C	M×ℓ	H₂	Gn	WR	HR	N	H	H₁	Counterbore d×D×h	P	E
E－SMLG	3H	15～300	8	－	4	10.7	14	5.5	M2×1.3	－	－	3	2.6	2.5	4	1	M1.6	10	Please refer to the L specified size calculation table
E－SMLG	5H	20～600	12	8	2	12.7	19	－	M2×1.5	1.1	Φ1	5	3.7	3.5	6	1	2.4×3.4×0.8	15
*E－MLG E－GMLG E－SMLG	7H	40～900	17	12	2.5	20.75	30.71	13	M2×2.5	1.5	Φ1.2	7	4.8	5	8	1.5	2.4×4.2×2.3	15
	9H	45～900	20	15	2.5	28.5	39.9	16	M3×3	1.8	Φ1.4	9	6.5	5.5	10	2	3.6×6×3.5	20
	12H	60～900	27	20	3.5	30.8	44.78	20	M3×3.5	2.5	Φ2	12	8	7.5	13	3	3.6×6×4.5	25
	15H	70～900	32	25	3.5	41.8	57.96	25	M3×4	3	M3	15	10	8.5	16	4	3.6×6×4.5	40
E－SMLG	20H	70～1500	40	30	5	52.3	67.7	30	M4×6	4.1	Φ2.2	20	11	10	20	5	6×9.5×5.5	60

*Set Item of Type "C-MLG" in not avaiable in some countries becuase of the concern of "rust".
E-GMLG and E-SMLG are recommendable type for long use.

■ Block only

Part Number		Block Dimensions (mm)
Type	Nominal Model	W	B	B₁	L₁	L₂	C	M×ℓ	H₂	Gn
E－MLGB	3H	8	－	4	10.7	14	5.5	M2×1.3	－	－
	5H	12	8	2	12.7	19	－	M2×1.5	1.1	Φ1
	7H	17	12	2.5	20.75	30.71	13	M2×2.5	1.5	Φ1.2
	9H	20	15	2.5	28.5	39.9	16	M3×3	1.8	Φ1.4
	12H	27	20	3.5	30.8	44.78	20	M3×3.5	2.5	Φ2
	15H	32	25	3.5	41.8	57.96	25	M3×4	3	M3
	20H	40	30	5	52.3	67.7	30	M4×6	4.1	Φ2.2

The dimensional tolerance of L length is ±1mm and

the dimensional tolerance of E end distance is ±0.5mm

E-MLGB is a common block that can be used in E-MLG, E-GMLG, and E-SMLG.

■ L Detailed dimension of dimension specified type
Dimension L specified type cuts both ends of the rail equally. Refer to the table below for the number of mounting holes (M) of the slide rail at this time.
In addition, E dimension is calculated with the formula below.
Economy series Linear Guide Length Specified Type E Dimension Calculation Formula

Economy series Linear Guide Length Specified Type E Dimension Calculation Formula

L : Guide Rail length
M: Guide Rail mounting holes
P: Guide Rail holes pitch

■ Economical Miniature Linear Guide - Standard Guide -

Nominal Model	3H	5H	7H	9H	12H	15H	20H	Number of mounting holes M
L	14~24	25~35	-	45~47	-	70~87	90~149	2
	25~34	36~50	40~50	48~67	60~82	88~127	150~209	3
	35~44	51~65	51~65	68~87	83~107	128~167	210~269	4
	45~54	66~80	66~80	88~107	108~132	168~207	270~329	5
	55~64	81~95	81~95	108~127	133~157	208~247	330~389	6
	65~74	96~110	96~110	128~147	158~182	248~287	390~449	7
	75~84	111~125	111~125	148~167	183~207	288~327	450~509	8
	85~94	126~140	126~140	168~187	208~232	328~367	510~569	9
	95~104	141~155	141~155	188~207	233~257	368~407	570~629	10
	105~114	156~170	156~170	208~227	258~282	408~447	630~689	11
	115~124	171~185	171~185	228~247	283~307	448~487	690~749	12
	125~134	186~200	186~200	248~267	308~332	488~527	750~809	13
	135~144	201~215	201~215	268~287	333~357	528~567	810~869	14
	145~154	216~230	216~230	288~307	358~382	568~607	870~929	15
	155~164	231~245	231~245	308~327	383~407	608~647	930~989	16
	165~174	246~260	246~260	328~347	408~432	648~687	990~1049	17
	175~184	261~275	261~275	348~367	433~457	688~727	1050~1109	18
	185~194	276~290	276~290	368~387	458~482	728~767	1110~1169	19
	195~204	291~305	291~305	388~407	483~507	768~807	1170~1229	20
	205~214	306~320	306~320	408~427	508~532	808~847	1230~1289	21
	215~224	321~335	321~335	428~447	533~557	848~887	1290~1349	22
	225~234	336~350	336~350	448~467	558~582	888~900	1350~1409	23
	235~244	351~365	351~365	468~487	583~607	-	1470~1500	24
	245~254	366~380	366~380	488~507	608~632		-	25
	255~264	381~395	381~395	508~527	633~657			26
	265~274	396~410	396~410	528~547	658~682			27
	275~284	411~425	411~425	548~567	683~707			28
	285~294	426~440	426~440	568~587	708~732			29
	295~300	441~455	441~455	588~607	733~757			30
	-	456~470	456~470	608~627	758~782			31
P	10	15	15	20	25	40	60

Nominal Model	5H	7H	9H	12H	15H	20H	Number of mounting holes M
L	471~485	471~485	628~647	783~807	-	-	32
	486~500	486~500	648~667	808~832			33
	501~515	501~515	668~687	833~857			34
	516~530	516~530	688~707	858~882			35
	531~545	531~545	708~727	883~900			36
	546~560	546~560	728~747	-			37
	561~575	561~575	748~767				38
	576~590	576~590	768~787				39
	591~600	591~605	788~807				40
	-	606~620	808~827				41
		621~635	828~847				42
		636~650	848~867				43
		651~665	868~887				44
		666~680	888~900				45
		681~695	-				46
		696~710					47
		711~725					48
		726~740					49
		741~755					50
		756~770					51
		771~785					52
		786~800					53
		801~815					54
		816~830					55
		831~845					56
		846~860					57
		861~875					58
		876~890					59
		891~900					60
P	15	15	20	25	40	60	-

Alterations

Code

Spec.

Change to Tapped Holes

Ordering code: MC
Change counterbored holes for fixing a guide to tapped holes.

Nominal size	MC
7	M3
9,12	M4
15	M5

2-Block Specifications

1 block added to 1-block product to ship as 2 block item.

If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.

3-Block Specifications

2 blocks added to 1-block product to ship as 3 block item.

If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.

4-Block Specifications

3 blocks added to 1-block product to ship as 4 block item.

If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.

Preload adjustment

Change Z0: zero preload to
ZF: Normal clearance
Z1: Light preload
Z2: Medium preload

Rail End Cut

Left End Cut
ES

Specify the edge distance in 0.5 mm increments. When the specified edge distance exceeds or is close to the hole spacing, cutting may result in hole breakage.

EB + ES = 2E. In cases where cutting is not feasible, distribute the dimensions evenly according to the standards.

Right End Cut
EB

Precision Benchmark

●Dimensional Precision

Unit：μm

Linear Guide Type	Precision Criteria	MISUMI Standard Products
Miniature Linear Guide	Height H Tolerance	±40
	Height H Pair Variation	40
	Width N Tolerance	±40
	Width N Pair Variation	40

*Compared to 2022, the accuracy of Economy series products has been improved.

●Running Parallelism

Rail Length (mm)	Accuracy grade (μm)
50 or Less	16
50-80	18
80-125	21
125-200	21
200-250	22
250-315	23
315-400	25
400-500	26
500-630	28
630-800	30
800-900	32

Diagram of Dimensional Precision of the Linear Guide

[Running Parallelism]
The values in the table are all measured after the slide rail is fixed on the reference base.
When moving the slider within the full length of the slide rail, measure the change of the block upper surface C relative to the slide rail bottom surface A and the change of the block reference surface D relative to the slide rail reference surface B.

Diagram of Running Parallelism of the Linear Guide

Diagram of Running Parallelism of the Linear Guide

Allowable Load

Nominal model	Basic Rated Load		Static Allowable Moment		Mass
Nominal model	C(Dynamic） kN	Co（Static） kN	M_A・M_B N.m	M_C N.m	Blocks kg	Guide Rails kg/m
3H	0.29	0.56	0.88	1.07	0.0012	0.054
5H	0.47	0.9	2.05	2.35	0.0045	0.12
7H	1.37	1.96	4.8	7.64	0.0124	0.22
9H	2.55	4.02	18.62	19.6	0.0215	0.38
12H	3.72	5.88	36.26	38.22	0.044	0.65
15H	6.37	9.11	57.82	73.5	0.0847	1.06
20H	8.5	12.9	85	131.3	0.185	1.53

Product Features

Feature 1: New construction, greatly reducing noise and improving smoothness.
Feature 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve high precision positioning of the control device.
Feature 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature 5: It is suitable for high speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.

Usage Method

■ About use
① MISUMI's linear guide is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ If you have anti-rust requirements, please choose the Vacuum Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
MISUMI Miniature Linear Guide Slider Precautions

■ About maintenance (supply of grease)
① Grease forms an oil film on the surface of the linear guide ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
② Recommend grease filling interval:
Usually every 6 months.
For longer moving distance, 3 months, or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
*The above is the grease injection interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.

Precautions

For normal use, the installation of the linear guide needs to meet the following four points:

① Whether the shape of the mounting surface produces interference
Flatness of MISUMI mounting surface

② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
MISUMI parallelism error tolerance

③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
Allowable height error tolerance of linear-guides

Allowable height error tolerance of linear-guides

④ Use the standard
Installation method of linear guides

installation method Click

here for the detailed installation method

Example of Use

Mechanism Name: 4 times stroke slide
Feature 1: suitable for medium frequency driving and positioning.
Feature 2: transfer the light workpiece on the worktable according to 4 times the distance of the cylinder stroke.

For details, click

here

Application Industries

Medical		Smart phone

Robotics		Electronic & Electrical Appliances

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
E-GMLG7H-[40-900/1]
E-GMLG9H-[45-900/1]
E-GMLG12H-[60-900/1]
E-GMLG15H-[70-900/1]
E-MLG7H-[40-900/1]
E-MLG9H-[45-900/1]
E-MLG12H-[60-900/1]
E-MLG15H-1200
E-MLG15H-[70-900/1]
E-MLGB7H
E-MLGB9H
E-MLGB12H
E-MLGB15H
E-SMLG3H-[14-300/1]
E-SMLG5H-[25-1000/1]
E-SMLG7H-[40-900/1]
E-SMLG9H-[45-900/1]
E-SMLG12H-[60-900/1]
E-SMLG15H-[70-900/1]
E-SMLG20H-[80-1000/1]

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Rail Length L (mm)	Assembly Height H (mm)	Nominal Part Number	Rail Type	Set / Single Item	No. of Blocks (mm)	Basic Load Rating: Dynamic Load (N)	Basic Load Rating: Static Load (N)	Allowable Static Moment MA (N・m)	Allowable Static Moment MB (N・m)	Allowable Static Moment MC (N・m)	Guide Rail Surface Treatment	L Dimension Type	Applicable Linear Guide	Rail Material (Surface Treatment)	Rail Surface Treatment
-	1 Piece(s)		5 Day(s)	40 ～ 900	8	7H	Standard Rail	Set	1	1.37	1.96	4.8	4.8	7.64	Vacuum Evaporation Chrome	Specified Type	-	Carbon Steel (Bearing Steel)	Vacuum evaporated chrome plating
-	1 Piece(s)		5 Day(s)	45 ～ 900	10	9H	Standard Rail	Set	1	2.55	4.02	18.62	18.62	19.6	Vacuum Evaporation Chrome	Specified Type	-	Carbon Steel (Bearing Steel)	Vacuum evaporated chrome plating
-	1 Piece(s)		5 Day(s)	60 ～ 900	13	12H	Standard Rail	Set	1	3.72	5.88	36.26	36.26	38.22	Vacuum Evaporation Chrome	Specified Type	-	Carbon Steel (Bearing Steel)	Vacuum evaporated chrome plating
-	1 Piece(s)		5 Day(s)	70 ～ 900	16	15H	Standard Rail	Set	1	6.37	9.11	57.82	57.82	73.5	Vacuum Evaporation Chrome	Specified Type	-	Carbon Steel (Bearing Steel)	Vacuum evaporated chrome plating
-	1 Piece(s)		10 Day(s) or more	40 ～ 900	8	7H	Standard Rail	Set	1	1.37	1.96	4.8	4.8	7.64	N/A	Specified Type	-	Carbon Steel (Bearing Steel)	none
-	1 Piece(s)		10 Day(s) or more	45 ～ 900	10	9H	Standard Rail	Set	1	2.55	4.02	18.62	18.62	19.6	N/A	Specified Type	-	Carbon Steel (Bearing Steel)	none
-	1 Piece(s)		10 Day(s) or more	60 ～ 900	13	12H	Standard Rail	Set	1	3.72	5.88	36.26	36.26	38.22	N/A	Specified Type	-	Carbon Steel (Bearing Steel)	none
-	1 Piece(s)		10 Day(s) or more	-	16	15H	Standard Rail	Set	1	6.37	9.11	57.82	57.82	73.5	N/A	Specified Type	-	Carbon Steel (Bearing Steel)	none
-	1 Piece(s)		10 Day(s) or more	70 ～ 900	16	15H	Standard Rail	Set	1	6.37	9.11	57.82	57.82	73.5	N/A	Specified Type	-	Carbon Steel (Bearing Steel)	none
MYR 43.99	1 Piece(s)	Available	9 Day(s) or more	-	8	7H	-	Block Only	-	1.37	1.96	4.8	4.8	7.64	-	-	E-GMLG7H / E-SMLG7H	-	-
MYR 43.99	1 Piece(s)	Available	9 Day(s) or more	-	10	9H	-	Block Only	-	2.55	4.02	18.62	18.62	19.6	-	-	E-GMLG9H / E-SMLG9H	-	-
MYR 49.22	1 Piece(s)	Available	1 Day(s) or more	-	13	12H	-	Block Only	-	3.72	5.88	36.26	36.26	38.22	-	-	E-GMLG12H / E-SMLG12H	-	-
MYR 57.91	1 Piece(s)	Available	1 Day(s) or more	-	16	15H	-	Block Only	-	6.37	9.11	57.82	57.82	73.5	-	-	E-GMLG15H / E-SMLG15H	-	-
-	1 Piece(s)		10 Day(s) or more	14 ～ 300	4	3 / 3H	Standard Rail	Set	1	0.29	0.56	1.07	1.07	0.88	N/A	Specified Type	-	Stainless Steel	none
-	1 Piece(s)		6 Day(s) or more	25 ～ 1000	6	5 / 5H	Standard Rail	Set	1	0.47	0.9	2.05	2.05	2.35	N/A	Specified Type	-	Stainless Steel	none
-	1 Piece(s)		5 Day(s)	40 ～ 900	8	7H	Standard Rail	Set	1	1.37	1.96	4.8	4.8	7.64	N/A	Specified Type	-	Stainless Steel	none
-	1 Piece(s)		5 Day(s)	45 ～ 900	10	9H	Standard Rail	Set	1	2.55	4.02	18.62	18.62	19.6	N/A	Specified Type	-	Stainless Steel	none
-	1 Piece(s)		5 Day(s)	60 ～ 900	13	12H	Standard Rail	Set	1	3.72	5.88	36.26	36.26	38.22	N/A	Specified Type	-	Stainless Steel	none
-	1 Piece(s)		5 Day(s)	70 ～ 900	16	15H	Standard Rail	Set	1	6.37	9.11	57.82	57.82	73.5	N/A	Specified Type	-	Stainless Steel	none
-	1 Piece(s)		7 Day(s) or more	80 ～ 1000	20	20H	Standard Rail	Set	1	8.5	12.9	85	85	131.3	N/A	Specified Type	-	Stainless Steel	none

Basic Information

Block Type(mm)	Long Block	Preload(N・m)	Normal Clearance	Accuracy Standards(N・m)	Standard Grade
Material	Stainless Steel	Ball Arrangement	Miniature Type	Retainer	N/A
Lubrication Type(mm)	Lubrication Applied	Rolling Element	Ball	Lubrication Type	Lithium Grease Filled
Block Material (Surface Treatment)	Stainless Steel

Configure

20 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Rail Length L(mm)
[14-1000/1mm Unit(s)]
Clear
Assembly Height H(mm)
4

6

8

10

13

16

20
Clear
Nominal Part Number
3

3H

5

5H

7H

9H

12H

15H

20H
Clear
Rail Type
- Standard Rail
Clear
Set / Single Item
- Set
- Block Only
Clear
No. of Blocks(mm)
1
Clear
Guide Rail Surface Treatment
- N/A
- Vacuum Evaporation Chrome
Clear
L Dimension Type
- Specified Type
Clear
Applicable Linear Guide
E-GMLG7H / E-SMLG7H

E-GMLG9H / E-SMLG9H

E-GMLG12H / E-SMLG12H

E-GMLG15H / E-SMLG15H
Clear
Rail Material (Surface Treatment)
- Carbon Steel (Bearing Steel)
- Stainless Steel
Clear
Rail Surface Treatment
- Vacuum evaporated chrome plating
- none
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

1 Day(s) or Less

5 Day(s) or Less

6 Day(s) or Less

7 Day(s) or Less

9 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Can linear guides or sliders be purchased separately?: Answer: Taking into account the accuracy of products, single slider models clearly indicated in the catalog can be purchased, and no others can be purchased.
Question: Can the stainless steel guide rails be guaranteed not to rust?: Answer: Stainless steel is a product that has a certain antirust function compared to carbon steel, but it cannot be guaranteed that it will never rust. Depending on the operating environment, there may also be short-term rust.
Question: What problems should be paid attention to when the linear guide is installed vertically?: Answer: Attention should be paid to prevent the slider from falling off and causing the balls to fall off during installation.
Question: What does micro preloading in linear guide mean?: Answer: MISUMI's linear guides control the clearance by selecting the size of the internal ball. Through the negative clearance, the rigidity is improved and the elastic displacement is reduced. This is preloading. Generally speaking, the life and accuracy of the micro preloading type will be better than that of the standard clearance type.
Question: Linear guide indicators include basic dynamic load rating and basic static load rating. Which indicator is the reference when selecting?: Answer: The basic dynamic load rating is used to calculate the rail life, and the basic static load rating is used to calculate the maximum allowable load.
Question: Can the corresponding linear guide products be selected according to the third-party guide rail model?: Answer: MISUMI offers third-party brand replacement services, so as long as the third party product model is given, we can replace it with corresponding MISUMI model. For details, please contact the customer service email or call the customer service phone.
Question: Can the rail or slider be repaired if it is damaged?: Answer: Repair service is not provided, re-purchase is recommended.
Question: Can linear guide length be arbitrarily specified?: Answer: It can be specified arbitrarily. However, MISUMI linear guides are divided into length fixed type and length specified type, and in case of length specified type, the length dimensions for length fixed type cannot be specified.

Check other FAQ (5 items) Hide

Additional Products in this Category

Tech Support

: Technical Inquiry

Miniature Linear Guides	Medium Load linear guide	Heavy Load linear guide

Typical model: SSEBZ10-55	Typical model: SVR24-280	Typical model: SXR24-280

How can we improve?

Miniature Linear Guides Long Blocks

(i)Caution

Economy Miniature Linear Guide - Long Block

Part Number

Basic Information

Configure

Specification/Dimensions

Rail Length L(mm)

Assembly Height H(mm)

Nominal Part Number

Rail Type

Set / Single Item

No. of Blocks(mm)

Guide Rail Surface Treatment

L Dimension Type

Applicable Linear Guide

Rail Material (Surface Treatment)

Rail Surface Treatment

CAD

Days to Ship

Specify Alterations

Frequently asked question (FAQ)

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm