Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Miniature Linear Guides Standard (Part Numbers)

Volume Discount

MiSUMi Economy

Miniature Linear Guides Standard
These linear guides or linear slides are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 170 and 345
● Assembly Height (mm.): 8, 10, 13 and 16
● Rail Type : Standard Rail
● Option: Set (Rail + Block) / Block only
● Material: Carbon Steel and Stainless Steel
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

RoHS

(i)Caution

This item is without surface treatment (possible risk to get rusty). If you care about surface treatment, please refer series E-GMLG.
Please expect longer LT for alteration ZA or ZB.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

Economy Miniature Linear Guide

MiniatureLinear GuidePrecision

- Customizable Rail Length For Versatile Applications

- Smooth And Precise Linear Motion

- Suitable For High Precision Equipment

- Available In Carbon Steel And Stainless Steel

- Cost-Effective Solution Without Compromising Performance

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Linear guide rails, also known as slide rails, linear guides, or linear slide rails, are used for linear reciprocating motion applications. They have a higher rated load than linear bearings while maintaining the same volume of moving components, as well as linear motion accuracy. They can also bear a certain amount of torque load, enabling high-precision linear movement under high load conditions.
Linear guide rails are used to support and guide moving parts, allowing them to move in a reciprocating linear motion along a specified direction. They are mainly used in mechanical structures that require high precision. The moving and fixed components of the linear guide rail do not use an intermediate medium, but instead employ rolling steel balls.

Product Comparison

■ Comparison with Similar MISUMI Product

	Similar MISUMI Product SSEB10-115	Economy Series E-GMLG9-115
Material	Stainless Steel	Rail:Carbon Steel Block:Stainless Steel
Hardness	56HRC up	58HRC up
Basic Rated Load C (Dynamic) (kN)	1.5	1.86
Basic Rated Load Co (Static) (kN)	2.5	2.55
Static Allowable Moment MA/MB (N・m)	5.1	7.35
Static Allowable Moment MC (N・m)	10.2	11.76
Height H Tolerance Difference (μm)	±20	±20
Height H Pair Variation Difference (μm)	15	40
Width N Tolerance Difference (μm)	±25	±25
Width N Pair Variation Difference (μm)	20	40
Running Parallelism Guarantee (μm)*	7	15
Preload Management	Y	N
Model No. Selection Reference	Height H Reference	Rail Width W_R Reference
RoHS10	Compliant	Compliant

*Running parallelism varies by rail length.

Dimensional Drawing

■ Material

Type	Material		Rail Surface Treatment	Hardness	Preload/ Clearance
	Guide Rail	Block
*C-MLG	Bearing Steel	Stainless Steel	-	58-62HRC	Z0 Normal (No clearance)
E-GMLG			Vacuum evaporated chrome plating
E-SMLG	Stainless Steel		-	55-58HRC
C-MLGB	-	Stainless Steel	-	-

*Set Item of Type "C-MLG" in not avaiable in some countries becuase of the concern of "rust"
E-GMLG and E-SMLG are recommendable type for long use.

Specification Table

■Component Kit

Part Number		L (Specified Length)	Block Dimension (mm)									Guide Rail Dimension (mm)
Type	Nominal	L (Specified Length)	W	B	B₁	L₁	L₂	C	M×ℓ	H₂	Gn	WR	HR	N	H	H₁	Counterbore d×D×h	P	E
E-SMLG (Stainless Steel)	3	14~300	8	－	4	6.7	10	3.5	M1.6×1.3	－	－	3	2.6	2.5	4	1	M1.6	10	Please refer to the L Specified Dimension Calculation Table
E-SMLG (Stainless Steel)	5	14~300	12	8	2	10.7	14	－	M2×1.5	1.1	Φ1	5	3.7	3.5	6	1	2.4×3.4×0.8	15
*C-MLG (Carbon Steel) E-GMLG (Carbon Steel) E-SMLG (Stainless Steel)	7	25~900	17	12	2.5	12.5	22.54	8	M2×2.5	1.5	Φ1.2	7	4.8	5	8	1.5	2.4×4.2×2.3	15
	9	34~900	20	15	2.5	17.5	29.1	10	M3×3	1.8	Φ1.4	9	6.5	5.5	10	2	3.6×6×3.5	20
	12	45~900	27	20	3.5	20.1	33.9	15	M3×3.5	2.5	Φ2	12	8	7.5	13	3	3.6×6×4.5	25
	15	60~1000	32	25	3.5	25.1	41.4	20	M3×4	3	M3	15	10	8.5	16	4	3.6×6×4.5	40
E-SMLG (Stainless Steel)	20	80~1000	40	30	5	34.6	50	25	M4×6	4.1	Φ2.2	20	11	10	20	5	6×9.5×5.5	60

The dimensional tolerance for length L is ±1mm.

The dimensional tolerance for end distance E is ±0.5mm.

*Set Item of Type "C-MLG" in not avaiable in some countries becuase of the concern of "rust".
E-GMLG and E-SMLG are recommendable type for long use.

■Single Block

Part Number		Block Dimension (mm)
Type	Nominal	W	B	B₁	L₁	L₂	C	M×ℓ	H₂	Gn
C-MLGB	3	8	－	4	6.7	10	3.5	M1.6×1.3	－	－
	5	12	8	2	10.7	14	－	M2×1.5	1.1	Φ1
	7	17	12	2.5	12.5	22.54	8	M2×2.5	1.5	Φ1.2
	9	20	15	2.5	17.5	29.1	10	M3×3	1.8	Φ1.4
	12	27	20	3.5	20.1	33.9	15	M3×3.5	2.5	Φ2
	15	32	25	3.5	25.1	41.4	20	M3×4	3	M3
	20	40	30	5	34.6	50	25	M4×6	4.1	Φ2.2

For nominal size 3/5/20, both ends of the block are black in color.

■ Allowable Load

Nominal	Basic Rated Load		Static Allowable Moment		Mass
Nominal	C (Dynamic) kN	Co (Static) kN	M_A・M_B N.m	M_C N.m	Block kg	Rail kg/m
3	0.186	0.31	0.039	0.588	0.0008	0.054
5	0.333	0.549	1.666	1.078	0.0035	0.12
7	0.98	1.24	2.84	4.7	0.008	0.2
9	1.86	2.55	7.35	11.76	0.0139	0.38
12	2.84	3.92	13.72	25.48	0.03	0.65
15	4.61	5.59	21.56	45.08	0.0532	1.06
20	6.64	9.07	44.11	92.15	0.122	1.53

■ Detailed dimension of L dimension specified type
Dimension L specified type cuts both ends of the rail equally. Refer to the table below for the number of mounting holes (M) of the rail at this time.
In addition, Dimension E's calculation formula is as follows
"E" calculation formula
Economic type Linear Guide Length Specified Type Dimension E Calculation Formula

Economic type Linear Guide Length Specified Type Dimension E Calculation Formula

Economy series Miniature Linear Guide - Standard Guide Type -

Nominal	3	5	7	9	12	15	20	Number of mounting holes M
L	14~24	25~35	25~35	34~47	45~57	60~87	90~149	2
	25~34	36~50	36~50	48~67	58~82	88~127	150~209	3
	35~44	51~65	51~65	68~87	83~107	128~167	210~269	4
	45~54	66~80	66~80	88~107	108~132	168~207	270~329	5
	55~64	81~95	81~95	108~127	133~157	208~247	330~389	6
	65~74	96~110	96~110	128~147	158~182	248~287	390~449	7
	75~84	111~125	111~125	148~167	183~207	288~327	450~509	8
	85~94	126~140	126~140	168~187	208~232	328~367	510~569	9
	95~104	141~155	141~155	188~207	233~257	368~407	570~629	10
	105~114	156~170	156~170	208~227	258~282	408~447	630~689	11
	115~124	171~185	171~185	228~247	283~307	448~487	690~749	12
	125~134	186~200	186~200	248~267	308~332	488~527	750~809	13
	135~144	201~215	201~215	268~287	333~357	528~567	810~869	14
	145~154	216~230	216~230	288~307	358~382	568~607	870~929	15
	155~164	231~245	231~245	308~327	383~407	608~647	930~989	16
	165~174	246~260	246~260	328~347	408~432	648~687	990~1049	17
	175~184	261~275	261~275	348~367	433~457	688~727	1050~1109	18
	185~194	276~290	276~290	368~387	458~482	728~767	1110~1169	19
	195~204	291~305	291~305	388~407	483~507	768~807	1170~1229	20
	205~214	306~320	306~320	408~427	508~532	808~847	1230~1289	21
	215~224	321~335	321~335	428~447	533~557	848~887	1290~1349	22
	225~234	336~350	336~350	448~467	558~582	888~927	1350~1409	23
	235~244	351~365	351~365	468~487	583~607	928~967	1470~1500	24
	245~254	366~380	366~380	488~507	608~632	968~1000	-	25
	255~264	381~395	381~395	508~527	633~657	-		26
	265~274	396~410	396~410	528~547	658~682			27
	275~284	411~425	411~425	548~567	683~707			28
	285~294	426~440	426~440	568~587	708~732			29
	295~300	441~455	441~455	588~607	733~757			30
	-	456~470	456~470	608~627	758~782			31
P	10	15	15	20	25	40	60	-

Nominal	5	7	9	12	15	20	Number of mounting holes M
L	471~485	471~485	628~647	783~807	-	-	32
	486~500	486~500	648~667	808~832			33
	501~515	501~515	668~687	833~857			34
	516~530	516~530	688~707	858~882			35
	531~545	531~545	708~727	883~900			36
	546~560	546~560	728~747	-			37
	561~575	561~575	748~767				38
	576~590	576~590	768~787				39
	591~600	591~605	788~807				40
	-	606~620	808~827				41
		621~635	828~847				42
		636~650	848~867				43
		651~665	868~887				44
		666~680	888~900				45
		681~695	-				46
		696~710					47
		711~725					48
		726~740					49
		741~755					50
		756~770					51
		771~785					52
		786~800					53
		801~815					54
		816~830					55
		831~845					56
		846~860					57
		861~875					58
		876~890					59
		891~900					60
P	15	15	20	25	40	60	-

Alterations

Code

Spec.

Change to Tapped Holes

Ordering code: MC
Change counterbored holes for fixing a guide to tapped holes.

Nominal size	MC
7	M3
9,12	M4
15	M5

2-Block Specifications

1 block added to 1-block product to ship as 2 block item.

If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.

3-Block Specifications

2 blocks added to 1-block product to ship as 3 block item.

If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.

4-Block Specifications

3 blocks added to 1-block product to ship as 4 block item.

If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.

Preload adjustment

Change to
ZF: Normal clearance
Z1: Light preload
Z2: Medium preload
*Z0: zero preload (This is standard setting and there is no need to specify)

Low temperature
black chrome plating (rail)

The rail undergoes low temperature black chrome plating surface treatment

Rail End Cut

Left End Cut
ES

Specify the edge distance in 0.5 mm increments. When the specified edge distance exceeds or is close to the hole spacing, cutting may result in hole breakage.

EB + ES = 2E. In cases where cutting is not feasible, distribute the dimensions evenly according to the standards.

Right End Cut
EB

*The precision of the Economy series products has been improved.

Precision Benchmark

●Dimensional Precision

Dimensional Precision Type	Precision Standard	Misumi
Miniature	Height H Tolerance	±40
	Height H Pair Variation	40
	Width N Tolerance	±40
	Width N Pair Variation	40

●Running Parallelism

Rail Length (mm)	Accuracy grade (μm)
Less than 50	12
50-80	13
80-125	15
125-200	15
200-250	16
250-315	17
315-400	18
400-500	19
500-630	20
630-800	22
800-900	23

[Running Parallelism]
The values in the table are measured after the slide rail is fixed on the base.
When moving the slider within the entire length of the slide rail, measure the change of the upper surface C of the slider relative to the bottom surface A of the slide rail, and the change of the reference surface D of the slider relative to the reference surface B of the slide rail.
When moving the sliding block within the entire length of the slide rail, measure the change of the upper surface C of the slider relative to the bottom surface A of the slide rail, and the change of the reference surface D of the slider relative to the reference surface B of the slide rail.

Product Features

Feature 1: New construction, greatly reducing noise and improving smoothness.
Feature 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve high precision positioning of the device.
Feature 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature 5: It is suitable for high-speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.

Precautions

For normal use, the installation of the linear guide needs to meet the following four points:

① Whether the shape of the mounting surface produces interference
Whether the mounting surface produces interference

② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
Flatness of MISUMI mounting surface

③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
MISUMI parallelism error tolerance

④ Use the standard installation method
Installation method of linear guides

Click

here for the detailed installation method

Maintenance (supply of grease)
Grease forms an oil film on the surface of the linear guide ball and rolling surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the
service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
Miniature: Lithium Soap based Grease
Recommended grease filling interval: Usually every 3 months
Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.

Usage Method

■ About use
① MISUMI's linear guide is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ Economy series Miniature linear guide rail adopts bearing steel. If you have anti-rust requirements, please choose the Low Temp. Black Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
MISUMI Miniature Linear Guide Slider Precautions

MISUMI Miniature Linear Guide Slider Precautions

■ About maintenance (supply of grease)
① Grease forms an oil film on the surface of the linear guide ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
Miniature Linear Guide: Lithium Soap-based Grease (MULTEMP Grease PS2)
Medium· and Heavy Duty Linear Guide: Lithium Soap-based Grease (Showa Shell Petroleum Albania Grease S2)
② Recommended Grease Injection Interval:
Usually every 6 months.
For longer moving distance, 3 months, or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
*The above is the grease injection interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.

Example of Use

Mechanism Name: 4 times stroke slide
Feature 1: suitable for medium frequency driving and positioning.
Feature 2: transfer the light workpiece on the worktable according to 4 times the distance of the cylinder stroke.

For details, click

here

Application Industries

Medical		Smart phone

Robotics		Electronic & Electrical Appliances

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
C-MLGB7
C-MLGB9
C-MLGB12
C-MLGB15
E-GMLG7-[25-900/1]
E-GMLG9-520
E-GMLG9-[35-900/1]
E-GMLG12-[45-900/1]
E-GMLG15-[70-900/1]
E-SMLG3-[14-300/1]
E-SMLG5-[21-500/1]
E-SMLG7-[25-900/1]
E-SMLG9-[35-900/1]
E-SMLG12-[45-900/1]
E-SMLG15-[70-900/1]
E-SMLG20-[80-1000/1]
E-SMLGB7

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Rail Length L (mm)	Assembly Height H (mm)	Nominal Part Number	Rail Type	Set / Single Item	Material	No. of Blocks (mm)	Basic Load Rating: Dynamic Load (N)	Basic Load Rating: Static Load (N)	Allowable Static Moment MA (N・m)	Allowable Static Moment MB (N・m)	Allowable Static Moment MC (N・m)	Guide Rail Surface Treatment	L Dimension Type	Applicable Linear Guide	H Dimension	Rail Width WR (mm)	Rail Material (Surface Treatment)	Rail Surface Treatment
MYR 35.63	1 Piece(s)	Available	1 Day(s) or more	-	8	7	-	Block Only	Stainless Steel	-	0.98	1.24	2.84	2.84	4.7	-	-	C-MLG7 / E-GMLG7 / E-SMLG7	8	-	-	-
MYR 35.63	1 Piece(s)	Available	1 Day(s) or more	-	10	9	-	Block Only	Stainless Steel	-	1.86	2.55	7.35	7.35	11.76	-	-	C-MLG9 / E-GMLG9 / E-SMLG9	10	-	-	-
MYR 40.09	1 Piece(s)	Available	1 Day(s) or more	-	13	12	-	Block Only	Stainless Steel	-	2.84	3.92	13.72	13.72	25.48	-	-	C-MLG12 / E-GMLG12 / E-SMLG12	13	12	-	-
MYR 49.00	1 Piece(s)	Available	1 Day(s) or more	-	16	15	-	Block Only	Stainless Steel	-	4.61	5.59	21.56	21.56	45.08	-	-	C-MLG15 / E-GMLG15 / E-SMLG15	16	-	-	-
-	1 Piece(s)		5 Day(s)	25 ～ 900	8	7	Standard Rail	Set	Carbon Steel	1	0.98	1.24	2.84	2.84	4.7	-	Specified Type	-	8	7	Carbon Steel (Bearing Steel)	Vacuum evaporated chrome plating
-	1 Piece(s)		5 Day(s)	520	10	9	Standard Rail	Set	Carbon Steel	1	1.86	2.55	7.35	7.35	11.76	-	Specified Type	-	10	9	Carbon Steel (Bearing Steel)	Vacuum evaporated chrome plating
-	1 Piece(s)		5 Day(s)	35 ～ 900	10	9	Standard Rail	Set	Carbon Steel	1	1.86	2.55	7.35	7.35	11.76	-	Specified Type	-	10	9	Carbon Steel (Bearing Steel)	Vacuum evaporated chrome plating
-	1 Piece(s)		5 Day(s)	45 ～ 900	13	12	Standard Rail	Set	Carbon Steel	1	2.84	3.92	13.72	13.72	25.48	-	Specified Type	-	13	12	Carbon Steel (Bearing Steel)	Vacuum evaporated chrome plating
-	1 Piece(s)		5 Day(s)	70 ～ 900	16	15	Standard Rail	Set	Carbon Steel	1	4.61	5.59	21.56	21.56	45.08	-	Specified Type	-	16	15	Carbon Steel (Bearing Steel)	Vacuum evaporated chrome plating
-	1 Piece(s)		10 Day(s) or more	14 ～ 300	4	3	Standard Rail	Set	Stainless Steel	1	0.186	0.31	0.039	0.039	0.588	N/A	Specified Type	-	4	3	Stainless Steel	none
-	1 Piece(s)		10 Day(s) or more	21 ～ 500	6	5	Standard Rail	Set	Stainless Steel	1	0.333	0.549	1.078	1.078	1.666	N/A	Specified Type	-	6	5	Stainless Steel	none
-	1 Piece(s)		5 Day(s)	25 ～ 900	8	7	Standard Rail	Set	Stainless Steel	1	0.98	1.24	2.84	2.84	4.7	N/A	Specified Type	-	8	7	Stainless Steel	none
-	1 Piece(s)		5 Day(s)	35 ～ 900	10	9	Standard Rail	Set	Stainless Steel	1	1.86	2.55	7.35	7.35	11.76	N/A	Specified Type	-	10	9	Stainless Steel	none
-	1 Piece(s)		5 Day(s)	45 ～ 900	13	12	Standard Rail	Set	Stainless Steel	1	2.84	3.92	13.72	13.72	25.48	N/A	Specified Type	-	13	12	Stainless Steel	none
-	1 Piece(s)		5 Day(s)	70 ～ 900	16	15	Standard Rail	Set	Stainless Steel	1	4.61	5.59	21.56	21.56	45.08	N/A	Specified Type	-	16	15	Stainless Steel	none
-	1 Piece(s)		7 Day(s) or more	80 ～ 1000	20	20	Standard Rail	Set	Stainless Steel	1	6.64	9.07	44.11	44.11	92.15	N/A	Specified Type	-	20	20	Stainless Steel	none
MYR 58.56	1 Piece(s)		11 Day(s) or more	-	8	7	-	Block Only	Stainless Steel	-	0.98	1.24	2.84	2.84	4.7	-	-	C-MLG7 / E-GMLG7 / E-SMLG7	8	-	-	-

Basic Information

Block Type(mm)	Standard Block	Preload(N・m)	Normal Clearance	Accuracy Standards(N・m)	Standard Grade
Ball Arrangement	Miniature Type	Retainer	N/A	Lubrication Type(mm)	Lubrication Applied
Rolling Element	Ball	Lubrication Type	Lithium Grease Filled	Block Material (Surface Treatment)	Stainless Steel

Configure

17 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Rail Length L(mm)
520
[14-1000/1mm Unit(s)]
Clear
Assembly Height H(mm)
4

6

8

10

13

16

20
Clear
Nominal Part Number
3

5

7

9

12

15

20
Clear
Rail Type
- Standard Rail
Clear
Set / Single Item
- Set
- Block Only
Clear
Material
- Carbon Steel
- Stainless Steel
Clear
No. of Blocks(mm)
1
Clear
Guide Rail Surface Treatment
- N/A
Clear
L Dimension Type
- Specified Type
Clear
Applicable Linear Guide
C-MLG7 / E-GMLG7 / E-SMLG7

C-MLG9 / E-GMLG9 / E-SMLG9

C-MLG12 / E-GMLG12 / E-SMLG12

C-MLG15 / E-GMLG15 / E-SMLG15
Clear
H Dimension
- 4
- 6
- 8
- 10
- 13
- 16
- 20
Clear
Rail Width WR(mm)
- 3
- 5
- 7
- 9
- 12
- 15
- 20
Clear
Rail Material (Surface Treatment)
- Carbon Steel (Bearing Steel)
- Stainless Steel
Clear
Rail Surface Treatment
- Vacuum evaporated chrome plating
- none
Clear
type
- C-MLGB
- E-GMLG
- E-SMLG
- E-SMLGB
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

1 Day(s) or Less

5 Day(s) or Less

7 Day(s) or Less

10 Day(s) or Less

11 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Can linear guides or sliders be purchased separately?: Answer: Taking into account the accuracy of products, single slider models clearly indicated in the catalog can be purchased, and no others can be purchased.
Question: Can the stainless steel guide rails be guaranteed not to rust?: Answer: Stainless steel is a product that has a certain antirust function compared to carbon steel, but it cannot be guaranteed that it will never rust. Depending on the operating environment, there may also be short-term rust.
Question: What problems should be paid attention to when the linear guide is installed vertically?: Answer: Attention should be paid to prevent the slider from falling off and causing the balls to fall off during installation.
Question: What does micro preloading in linear guide mean?: Answer: MISUMI's linear guides control the clearance by selecting the size of the internal ball. Through the negative clearance, the rigidity is improved and the elastic displacement is reduced. This is preloading. Generally speaking, the life and accuracy of the micro preloading type will be better than that of the standard clearance type.
Question: Linear guide indicators include basic dynamic load rating and basic static load rating. Which indicator is the reference when selecting?: Answer: The basic dynamic load rating is used to calculate the rail life, and the basic static load rating is used to calculate the maximum allowable load.
Question: Can the corresponding linear guide products be selected according to the third-party guide rail model?: Answer: MISUMI offers third-party brand replacement services, so as long as the third party product model is given, we can replace it with corresponding MISUMI model. For details, please contact the customer service email or call the customer service phone.
Question: Can the rail or slider be repaired if it is damaged?: Answer: Repair service is not provided, re-purchase is recommended.
Question: Can linear guide length be arbitrarily specified?: Answer: It can be specified arbitrarily. However, MISUMI linear guides are divided into length fixed type and length specified type, and in case of length specified type, the length dimensions for length fixed type cannot be specified.

Check other FAQ (5 items) Hide

Additional Products in this Category

Tech Support

: Technical Inquiry

Miniature linear guide rail	Medium Load linear guide	Heavy Load linear guide

Typical model: SSEBZ10-55	Typical model: SVR24-280	Typical model: SXR24-280

How can we improve?

Miniature Linear Guides Standard (Part Numbers)

(i)Caution

Economy Miniature Linear Guide

Part Number

Basic Information

Configure

Specification/Dimensions

Rail Length L(mm)

Assembly Height H(mm)

Nominal Part Number

Rail Type

Set / Single Item

Material

No. of Blocks(mm)

Guide Rail Surface Treatment

L Dimension Type

Applicable Linear Guide

H Dimension

Rail Width WR(mm)

Rail Material (Surface Treatment)

Rail Surface Treatment

type

CAD

Days to Ship

Specify Alterations

Frequently asked question (FAQ)

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm