(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
2020 / 4420, Slot Width 6mm Aluminum Frames
MiSUMi Economy
- RoHS
(i)Caution
- LCF6-2020 is ROHS compliant.
- LCF6-2020 will be shipped from warehouse in Malaysia.
Part Number
Configured Part Number is shown.
Product overview
Domestic universal European standard profile with 6 mm groove width and 2020 side length aluminum profile.
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.
Suitable for structures such as small equipment hood, cabinet, and display column.
Standard type and round corner type are available for selection
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.
Suitable for structures such as small equipment hood, cabinet, and display column.
Standard type and round corner type are available for selection
Product feature
1. Complies with the GB industrial aluminum profile standard, with 8 to 10μ clear anodized surface for scratch resistance.
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
Dimensional drawing
| Type | Profile type |  Material |  Surface treatment | |
| Fixed type | Specified type | |||
| KLCF6 | LCF6 | Standard | 6063-T5 | Clear anodized |
| KLCFB6 | LCFB6 | Black | Black anodizing | |
| - | LCFR6 | Semicircular | Clear anodized | |
| KLCFT6 | LCFT6 | Double-sided groove | Clear anodized | |
| - | LCF6 | Two-row groove | Clear anodized | |
Specification overview
[Specification]
The specification table includes information such as the specified length range, unit, weight/meter, and inertial intercept.
Any length from 50 to 4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.
The specification table includes information such as the specified length range, unit, weight/meter, and inertial intercept.
| Part Number |
| LCF6-2020-1000 |
Type ( type) |  Profile cross-section |  Total length L | Profile type | Weight kg/m | Cross-sectional moment of inertia | |||
| Fixed type | Specified type | Fixed type | Specified type | Lx (cm4) | Ly (cm4) | |||
| KLCF6 | LCF6 | 2020 | 4000 | 50–4000 (specified unit 0.5 mm) | Standard | 0.48 | 0.72 | 0.72 |
| KLCFB6 | LCFB6 | Black | ||||||
| - | LCFR6 | Semicircular | 0.6 | 0.6 | ||||
| KLCFT6 | LCFT6 | Double-sided groove | 0.55 | 0.73 | 0.83 | |||
| - | LCF6 | 4420 | Two-row groove | 1.21 | 8.93 | 8.93 | ||
Any length from 50 to 4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| LCF6-2020-[50-3000/1] |
| LCF6-4420-[50-2800/0.5] |
| LCFB6-2020-[50-2800/0.5] |
| LCFR6-2020-[50-2800/0.5] |
| LCFT6-2020-[50-2800/0.5] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Number of Slotted Surfaces | Surface Treatment | Extrusion Type | Extrusion Type | Overall Length L (Effective Length) | Weight (kg/m) | Wall Thickness (t) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 2 Day(s) | Four-Side Slots | Clear Anodize Processing | Square Shape | ① Standard | 50 ～ 3000 | 0.48 | 1.8 | ||
- | 1 Piece(s) | 7 Day(s) or more | Two-Side Slots | Clear Anodize Processing | Square Shape | ⑤ Two-row groove | 50 ～ 2800 | 1.13 | - | ||
- | 1 Piece(s) | 7 Day(s) or more | Four-Side Slots | Black Anodize Treatment | Square Shape | ② Black | 50 ～ 2800 | 0.48 | - | ||
- | 1 Piece(s) | 12 Day(s) or more | Two-Side Slots | Clear Anodize Processing | R Shape | ③ Semicircular | 50 ～ 2800 | 0.48 | - | ||
- | 1 Piece(s) | 12 Day(s) or more | Two-Side Slots | Clear Anodize Processing | Square Shape | ④ 2-side groove | 50 ～ 2800 | 0.55 | - |
Loading...
Application example
Related product
| Recommended product 1 | Recommended product 2 | Recommended product 3 |
| Economy European standard 40 series aluminum profile, groove width 8 mm | Economy single side tabbed bracket, special for aluminum profile | Economy PVC plate, polyvinyl chloride plate, straight |
 |  |  |
Precaution
1. The profile surface is covered with a protective film. Due to adhesion from the glue, a small amount of aluminum debris may remain. This is not a quality problem, and all aluminum debris will be removed once the protective film is taken off.
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
Alteration
| Alteration name | Example of alteration code | Specification drawing | Machining content / corresponding accessory |
| End face tapping (center hole) | LTP/RTP/TPW |  | Threaded holes machined on the end of the aluminum profile Accessories used for this alteration: Cup head bolt |
| 45-degree cutting | L□T45/R□T45 |  | 45-degree angle cutting |
| Open wrench hole at fixed position | LWP/RWP |  | Concealed connection Accessories used for this alteration: Cup head bolt Elastic fastener |
| Drill countersunk hole at specified position | Z8/XA |  | Drill a counterbored hole at any specified position on the left end face Accessories used for this alteration: Cup head bolt |
| S hole | LSH/RSH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Whistle (built-in connection) |
| M hole | LMH/RMH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Riveted connector (internal connection) |
Basic Information
| Standard Extrusion Size(mm) | 20 | Extrusion Series | MISUMI Economy Series LCF 20 (Slot Width 6 mm) | Surface Milled | Not Provided |
|---|---|---|---|---|---|
| Material | 6063-T5 | L Dimension Fixed, Specified | Specification |
Specification/Dimensions
-
Number of Slotted Surfaces
-
Four-Side Slots -
Two-Side Slots
-
-
Surface Treatment
-
Extrusion Type
-
Square Shape -
R Shape
-
-
Extrusion Type
- ④ 2-side groove
- ① Standard
- ② Black
- ③ Semicircular
- ⑤ Two-row groove
-
Overall Length L (Effective Length)
-
type
- LCF6-2020
- LCF6-4420
- LCFB6-2020
- LCFR6-2020
- LCFT6-2020
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 7 Day(s) or Less
- 12 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can aluminum alloy profiles be cut to a specified length? What is the cutting precision?
- Answer: Any length between 50 and 6000 (mm) can be specified (Can be specified down to 0.5mm increments) for cutting, and the cutting tolerance is ±0.5mm.
- Question: What is the difference between the pre-mounted nut and post-mounted nut?
- Answer: The pre-mounted nut must be installed from the end of the profile for use in new equipment. The post-mounted nut can be placed in the profile groove from any position for use in additional equipment.
Additional Products in this Category
- 2040 / 2060 / 2080, Slot Width 6mm Aluminum Frames
- 3060 / 3090 / 30120 / 30160 , Slot Width 8mm Aluminum Frames
- 4560, Slot Width 10mm Aluminum Frames
- 2525 / 2550, Slot Width 6mm Aluminum Frames
- 2020 Aluminum Frames Slot Width 6
- 1530 Door Frames, Slot Width 6/8mm
- 2040 Door Frames, Slot Width 8mm
- Sliding Door Dedicated Frames
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy