(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
4040, Slot Width 8mm Aluminum Frames
MiSUMi Economy
(i)Caution
- LCF8-4040, LCFL8-4040 & LCFW8-4040 is ROHS compliant.
- LCF8-4040, LCFL8-4040 & LCFW8-4040 will be shipped from warehouse in Malaysia.
- Please note that vertical spraying line is used for spray coating process, groove area might not covered.
Part Number
Configured Part Number is shown.
Product overview
Domestic universal European standard profile with 8 mm groove width and 4040 side length aluminum profile.
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.
There are four main types to choose from: standard type (large and small R corners), light type, ultra-light type, and heavy type.
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.
There are four main types to choose from: standard type (large and small R corners), light type, ultra-light type, and heavy type.
Product feature
1. Complies with the GB industrial aluminum profile standard, with 8 to 10μ clear anodized surface for scratch resistance.
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
Dimensional drawing
| Type | Profile type |  Material |  Surface treatment | |
| Fixed type | Specified type | |||
| KLCF8 | LCF8 | Standard (standard core) | 6063-T5 | Clear anodized |
| - | LCFY8 | Standard yellow (standard core) | Painted yellow | |
| KLCFW8 | LCFW8 | Heavy duty (standard core) | Clear anodized | |
| - | LCFNL8 | Light type (standard core) | Clear anodized | |
| KLCFM8 | LCFM8 | Round corner (lightweight core) | Clear anodized | |
| KLCFB8 | LCFB8 | Black (lightweight core) | Black anodizing | |
| KLCFS8 | LCFS8 | Sandblasting (lightweight core) | Sandblasting anodizing | |
| KLCFL8 | LCFL8 | Lightweight (lightweight core) | Clear anodized | |
| - | LCFLY8 | Lightweight yellow (lightweight core) | Painted yellow | |
| KLCFSL8 | LCFSL8 | Ultra-lightweight (lightweight core) | Clear anodized | |
Specification overview
[Specification]
The specification table includes information such as the specified length range, unit, weight/meter, and inertial intercept.
Any length from 50 to 4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.
The specification table includes information such as the specified length range, unit, weight/meter, and inertial intercept.
| Part Number |
| LCF8-4040-1000 |
Type ( type) |  Profile cross-section |  Total length L | Profile type | Weight kg/m | Cross-sectional moment of inertia | |||
| Fixed type | Specified type | Fixed type | Specified type | Lx (cm4) | Ly (cm4) | |||
| KLCF8 | LCF8 | 4040 | 4000 | 50–4000 (specified unit 0.5 mm) | Standard (standard core) | 1.54 | 9.7 | 9.7 |
| - | LCFY8 | Standard yellow (standard core) | ||||||
| KLCFW8 | LCFW8 | Heavy type (standard core) | 1.74 | 10.2 | 10.2 | |||
| - | LCFNL8 | Light type (standard core) | 1.1 | 5.5 | 5.5 | |||
| KLCFM8 | LCFM8 | Round corner (lightweight core) | 1.28 | 8.28 | 8.28 | |||
| KLCFB8 | LCFB8 | Black (lightweight core) | ||||||
| KLCFS8 | LCFS8 | Sandblasting (lightweight core) | ||||||
| KLCFL8 | LCFL8 | Lightweight (lightweight core) | 1.12 | 9.25 | 9.25 | |||
| - | LCFLY8 | Lightweight yellow (lightweight core) | ||||||
| KLCFSL8 | LCFSL8 | Ultra-lightweight (lightweight core) | 0.89 | 5.06 | 5.07 | |||
Any length from 50 to 4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| LCF8-4040-[50-3000/1] |
| LCFB8-4040-[50-2800/0.5] |
| LCFL8-4040-[50-3000/1] |
| LCFLY8-4040-[50-2800/0.5] |
| LCFM8-4040-[50-2800/0.5] |
| LCFNL8-4040-[50-2800/0.5] |
| LCFS8-4040-[50-2800/0.5] |
| LCFSL8-4040-[50-2800/0.5] |
| LCFW8-4040-[50-3000/1] |
| LCFY8-4040-[50-2800/0.5] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Surface Treatment | Extrusion Type | Type | Overall Length L (Effective Length) | Weight (kg/m) | Wall Thickness (t) (mm) | Feature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 2 Day(s) | 10 | Clear Anodize Processing | ① Standard (standard core) | Standard Core | 50 ～ 3000 | 1.55 | 1.622 | - | ||
- | 1 Piece(s) | 12 Day(s) or more | - | Black Anodize Treatment | ⑥ Black (lightweight core) | Light Core | 50 ～ 2800 | 1.27 | - | - | ||
- | 1 Piece(s) | 2 Day(s) | - | Clear Anodize Processing | ⑧ Lightweight (lightweight core) | Light Core | 50 ～ 3000 | 1.12 | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | - | [Baked Finish (Yellow)] Baked Yellow Paint | ⑨ Lightweight Yellow (lightweight core) | Light Core | 50 ～ 2800 | 1.12 | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | - | Clear Anodize Processing | ⑤ Round corner (lightweight core) | Light Core | 50 ～ 2800 | 1.27 | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | - | Clear Anodize Processing | ④ Lightweight (standard core) | Standard Core | 50 ～ 2800 | 1.06 | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | - | Clear Anodize Processing | ⑦ Sandblasting (lightweight core) | Light Core | 50 ～ 2800 | 1.27 | - | Sand Balst Finished | ||
- | 1 Piece(s) | 7 Day(s) or more | - | Clear Anodize Processing | ⑩ Ultra-lightweight (lightweight core) | Light Core | 50 ～ 2800 | 0.89 | - | - | ||
- | 1 Piece(s) | 2 Day(s) | - | Clear Anodize Processing | ③ Heavy type (standard core) | Standard Core | 50 ～ 3000 | 1.9 | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | - | [Baked Finish (Yellow)] Baked Yellow Paint | ② Standard yellow (standard core) | Standard Core | 50 ～ 2800 | 1.55 | - | - |
Loading...
Precaution
1. The profile surface is covered with a protective film. Due to adhesion from the glue, a small amount of aluminum debris may remain. This is not a quality problem, and all aluminum debris will be removed once the protective film is taken off.
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
Alteration
| Alteration name | Example of alteration code | Specification drawing | Machining content / corresponding accessory |
| End face tapping (center hole) | LTP/RTP/TPW |  | Threaded holes machined on the end of the aluminum profile Accessories used for this alteration: Cup head bolt |
| 45-degree cutting | L□T45/R□T45 |  | 45-degree angle cutting |
| Open wrench hole at fixed position | LWP/RWP |  | Concealed connection Accessories used for this alteration: Cup head bolt Elastic fastener |
| Drill countersunk hole at specified position | Z8/XA |  | Drill a counterbored hole at any specified position on the left end face Accessories used for this alteration: Cup head bolt |
| S hole | LSH/RSH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Whistle (built-in connection) |
| M hole | LMH/RMH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Riveted connector (internal connection) |
Application example
Related product
| Recommended product 1 | Recommended product 2 | Recommended product 3 |
| Economy European standard 30 series aluminum profile, groove width 8 mm | Economy single side tabbed bracket, special for aluminum profile | Economy PVC plate, polyvinyl chloride plate, straight |
 |  |  |
Basic Information
| Standard Extrusion Size(mm) | 40 | Number of Slotted Surfaces | Four-Side Slots | Extrusion Series | MISUMI Economy Series LCF 30/40/50/60 (Slot Width 8 mm) |
|---|---|---|---|---|---|
| Extrusion Type | Square Shape | Surface Milled | Not Provided | Material | 6063-T5 |
| L Dimension Fixed, Specified | Specified |
Specification/Dimensions
-
Surface Treatment
- Clear Anodize Processing
- Black Anodize Treatment
- Baked Finish (Yellow)
-
Extrusion Type
- ① Standard (standard core)
- ② Standard yellow (standard core)
- ③ Heavy type (standard core)
- ④ Lightweight (standard core)
- ⑤ Round corner (lightweight core)
- ⑥ Black (lightweight core)
- ⑦ Sandblasting (lightweight core)
- ⑧ Lightweight (lightweight core)
- ⑨ Lightweight Yellow (lightweight core)
- ⑩ Ultra-lightweight (lightweight core)
-
Type
- Light Core
- Standard Core
-
Overall Length L (Effective Length)
-
type
- LCF8-4040
- LCFB8-4040
- LCFL8-4040
- LCFLY8-4040
- LCFM8-4040
- LCFNL8-4040
- LCFS8-4040
- LCFSL8-4040
- LCFW8-4040
- LCFY8-4040
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 7 Day(s) or Less
- 12 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can aluminum alloy profiles be cut to a specified length? What is the cutting precision?
- Answer: Any length between from 50mm can be specified for cutting, Cutting tolerance is L ±0.5mm.
- Question: What is the difference between the pre-assembled nut and post-assembled nut?
- Answer: The pre-assembled nut must be installed from the end of the profile for use in new equipment. The post-assembled nut can be placed in the profile slot from any position for use in additional equipment.
Additional Products in this Category
- 3030, Slot Width 8mm Aluminum Frames
- 6060 / 6090 / 6630 , Slot Width 8mm Aluminum Frames
- 3060 / 3090 / 30120 / 30160 , Slot Width 8mm Aluminum Frames
- 4080 / 4060 / 40120 / 40160, Slot Width 8mm Aluminum Frames
- 3030 Aluminum Frames Slot Width 8
- 4040 Aluminum Frames Slot Width 8
- 4080 Aluminum Frames Slot Width 8
- 3060 Aluminum Frames Slot Width 8
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy