(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
3030, Slot Width 8mm Aluminum Frames
MiSUMi Economy
- RoHS
(i)Caution
- LCF8-3030 & LCFW8-3030 is ROHS compliant.
- LCF8-3030 & LCFW8-3030 will be shipped from warehouse in Malaysia.
- For the selection of SAME SIDE 45-Degree Cutting, please note that the length tolerance cannot be guaranteed.
Part Number
Configured Part Number is shown.
Product overview
Domestic universal European standard profile with 8 mm groove width and 3030 side length.
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.
Suitable for structures such as small equipment hood, cabinet, and display column.
Standard and heavy-duty 4-sided groove, 2-side groove, and crowned type are available for selection.
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.
Suitable for structures such as small equipment hood, cabinet, and display column.
Standard and heavy-duty 4-sided groove, 2-side groove, and crowned type are available for selection.
Product feature
1. Complies with the GB industrial aluminum profile standard, with 8 to 10μ clear anodized surface for scratch resistance.
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
Dimensional drawing
| Type | Profile type |  Material |  Surface treatment | |
| Fixed type | Specified type | |||
| KLCF8 | LCF8 | Standard | 6063-T5 | Clear anodized |
| KLCFB8 | LCFB8 | Black | Black anodizing | |
| KLCFS8 | LCFS8 | Sandblasting | Sandblasting anodizing | |
| KLCFW8 | LCFW8 | Heavy type | Clear anodized | |
| KLCFL8 | LCFL8 | Light type | Clear anodized | |
| KLCFLY8 | LCFLY8 | Yellow | Yellow painted | |
| - | LCFT8 | 2-side groove | Clear anodized | |
| KLCFF8 | LCFF8 | 3-side groove | Clear anodized | |
| KLCFR8 | LCFR8 | Semicircular | Clear anodized | |
Specification overview
[Specification]
The specification table includes information such as the specified length range, unit, weight/meter, and inertial intercept.
Any length from 50 to 4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.
The specification table includes information such as the specified length range, unit, weight/meter, and inertial intercept.
| Part Number |
| LCFL8-3030-1000 |
Type ( Type) |  Profile cross-section |  Total length L | Profile type | Weight kg/m | Cross-sectional moment of inertia | |||
| Fixed type | Specified type | Fixed type | Specified type | Lx (cm4) | Ly (cm4) | |||
| KLCF8 | LCF8 | 3030 | 4000 | 50–4000 (specified unit 0.5 mm) | Standard | 0.83 | 2.86 | 2.85 |
| KLCFB8 | LCFB8 | Black | 0.87 | |||||
| KLCFS8 | LCFS8 | Sandblasting | ||||||
| KLCFW8 | LCFW8 | Heavy type | 0.88 | 3.35 | 3.35 | |||
| KLCFL8 | LCFL8 | Light type | 0.66 | 1.67 | 1.67 | |||
| KLCFLY8 | LCFLY8 | Yellow | ||||||
| - | LCFT8 | 2-side groove | 0.98 | 2.98 | 2.98 | |||
| KLCFF8 | LCFF8 | 3-side groove | 0.95 | 2.91 | 3.12 | |||
| KLCFR8 | LCFR8 | Semicircular | 0.92 | 2.52 | 2.52 | |||
Any length from 50 to 4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| LCF8-3030-[50-3000/1] |
| LCFB8-3030-[50-2800/0.5] |
| LCFF8-3030-[50-2800/0.5] |
| LCFL8-3030-[50-2800/0.5] |
| LCFLY8-3030-[50-2800/0.5] |
| LCFR8-3030-[50-2800/0.5] |
| LCFS8-3030-[50-2800/0.5] |
| LCFT8-3030-[50-2800/0.5] |
| LCFW8-3030-[50-3000/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Number of Slotted Surfaces | Surface Treatment | Extrusion Type | Extrusion Type | Overall Length L (Effective Length) | Weight (kg/m) | Wall Thickness (t) (mm) | Feature |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 2 Day(s) | Four-Side Slots | Clear Anodize Processing | Square Shape | ① Standard | 50 ～ 3000 | 0.87 | 2 | - | ||
- | 1 Piece(s) | 7 Day(s) or more | Four-Side Slots | Black Anodize Treatment | Square Shape | ② Black | 50 ～ 2800 | 0.87 | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | Three-Side Slots | Clear Anodize Processing | Square Shape | ⑧ 3-side groove | 50 ～ 2800 | 1.04 | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | Four-Side Slots | Clear Anodize Processing | Square Shape | ⑤ Lightweight | 50 ～ 2800 | 0.63 | - | - | ||
- | 1 Piece(s) | 12 Day(s) or more | Four-Side Slots | [Baked Finish (Yellow)] Baked Yellow Paint | Square Shape | ⑥ Yellow | 50 ～ 2800 | 0.63 | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | Two-Side Slots | Clear Anodize Processing | R Shape | ⑨ Semicircular | 50 ～ 2800 | 0.92 | - | - | ||
- | 1 Piece(s) | 7 Day(s) or more | Four-Side Slots | Sandblasting | Square Shape | ③ Sandblasting | 50 ～ 2800 | 0.87 | - | Sand Blast Finished | ||
- | 1 Piece(s) | 7 Day(s) or more | Two-Side Slots | Clear Anodize Processing | Square Shape | ⑦ 2-side groove | 50 ～ 2800 | 0.98 | - | - | ||
- | 1 Piece(s) | 2 Day(s) | Four-Side Slots | Clear Anodize Processing | Square Shape | ④ Heavyweight | 50 ～ 3000 | 0.88 | - | - |
Loading...
Precaution
1. The profile surface is covered with a protective film. Due to adhesion from the glue, a small amount of aluminum debris may remain. This is not a quality problem, and all aluminum debris will be removed once the protective film is taken off.
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
Alteration
| Alteration name | Example of alteration code | Specification drawing | Machining content / corresponding accessory |
| End face tapping (center hole) | LTP/RTP/TPW |  | Threaded holes machined on the end of the aluminum profile Accessories used for this alteration: Cup head bolt |
| 45-degree cutting | L□T45/R□T45 |  | 45-degree angle cutting |
| Open wrench hole at fixed position | LWP/RWP |  | Concealed connection Accessories used for this alteration: Cup head bolt Elastic fastener |
| Drill countersunk hole at specified position | Z8/XA |  | Drill a counterbored hole at any specified position on the left end face Accessories used for this alteration: Cup head bolt |
| S hole | LSH/RSH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Whistle (built-in connection) |
| M hole | LMH/RMH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Riveted connector (internal connection) |
Application example
With the 3030 series profile, you can easily and simply assemble small frames, covers, racks, and other modules for automation equipment.
Related product
| Recommended product 1 | Recommended product 2 | Recommended product 3 |
| Economy European standard 40 series aluminum profile, groove width 8 mm | Economy single side tabbed bracket, special for aluminum profile | Economy PVC plate, polyvinyl chloride plate, straight |
 |  |  |
Basic Information
| Standard Extrusion Size(mm) | 30 | Extrusion Series | MISUMI Economy Series LCF 30/40/50/60 (Slot Width 8 mm) | Surface Milled | Not Provided |
|---|---|---|---|---|---|
| Material | 6063-T5 | L Dimension Fixed, Specified | Specified |
Specification/Dimensions
-
Number of Slotted Surfaces
-
Four-Side Slots -
Three-Side Slots -
Two-Side Slots
-
-
Surface Treatment
- Clear Anodize Processing
- Black Anodize Treatment
- Baked Finish (Yellow)
- Sandblasting
-
Extrusion Type
-
Square Shape -
R Shape
-
-
Extrusion Type
- ⑦ 2-side groove
- ⑧ 3-side groove
- ① Standard
- ② Black
- ③ Sandblasting
- ④ Heavyweight
- ⑤ Lightweight
- ⑥ Yellow
- ⑨ Semicircular
-
Overall Length L (Effective Length)
-
type
- LCF8-3030
- LCFB8-3030
- LCFF8-3030
- LCFL8-3030
- LCFLY8-3030
- LCFR8-3030
- LCFS8-3030
- LCFT8-3030
- LCFW8-3030
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 7 Day(s) or Less
- 12 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can aluminum alloy profiles be cut to a specified length? What is the cutting precision?
- Answer: Any length between 50 and 6000(mm) can be specified (Can be specified down to 0.5mm increments) for cutting, and the cutting tolerance is within ±0.5mm.
- Question: What is the difference between the pre-mounted nut and post-mounted nut?
- Answer: To install the nut first, you need to install it from the end of the profile first, and then fix it with an external screw. The post-mounted nut can be placed in the profile groove from the groove surface and fixed in conjunction with other accessories. Suitable for use when adding accessories to the profile.
Additional Products in this Category
- 6060 / 6090 / 6630 , Slot Width 8mm Aluminum Frames
- 4040, Slot Width 8mm Aluminum Frames
- 120120 , Slot Width 8mm Aluminum Frames
- 100100, Slot Width 8mm Aluminum Frames
- 4080 / 4060 / 40120 / 40160, Slot Width 8mm Aluminum Frames
- 3030 Aluminum Frames Slot Width 8
- 4040 Aluminum Frames Slot Width 8
- 4080 Aluminum Frames Slot Width 8
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy