(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Economy Type Post-Assembly Insertion Screws for 6 (Slot Width 8mm) Aluminum Frames
- Volume Discount
Economy type post-assembly insertion screws for 6 Series aluminum extrusions.
Part Number
Configured Part Number is shown.
Dimensional Drawing of Nuts
*with conductive function
Specification Table of Nuts
| Nuts Model | − | L |
| HATL6-6 | − | 17 |
・To check the latest price, please click the "Check Price" button after confirming the model number.
| Nuts Model | L | H | Compatible Frames (Series) | Reference tightening torque (N・m) |
| HATL6-6 | 13 | 12.0 | 6 Series | 11.7 |
| 17 | 17.0 | |||
| twenty two | 22.0 |
Specifications/Overview of Nuts
- This product is a Nuts integrated with a Nuts, reducing the amount of work required to tighten the Nuts.
- Economy post-insertion Nuts are approximately 50% cheaper thanconventional products (HATLSN) due to changes in material. They can be purchased at low cost.
- The conductive Nuts has a protrusion.
- When installed, the protrusions peel off the anodized coating on the aluminum frame, making it conductive.
How to Use of Nuts
- This product is a post-insertion Nuts. It can be installed from the groove after assembly.
- The Nuts can be seen even after being inserted into the frame groove, making it easy to position them with the joining parts and connect the brackets.
Selection Support Information of Nuts
■ Compatible series
This product is compatible withMisumi 6 series (slot width 8 mm) aluminum frames.
6 Series
■ Difference between first-in and last-in
・MISUMI aluminum frame Nuts are available in a variety of types, including first-in and last-in. Use them according to your needs.
First-in: Install from the groove end face before assembly. They are wide and have little play inside the groove, making Nuts tightening easy.
To remove the Nuts, hook the hex wrench into the hole in the Nuts and turn it at right angles to the groove.
6 Series related parts of Nuts
| Product name | Aluminum frame | bracket | Blind Joint | Frame cap | Groove cover |
|---|---|---|---|---|---|
| photograph | |||||
| Product page | Here | Here | Here | Here | Here |
| Part Number |
|---|
| HATL6-6-13 |
| HATL6-6-17 |
| HATL6-6-22 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Thread Length L (mm) |
|---|---|---|---|---|---|---|
MYR 3.46 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 13 | |
MYR 3.46 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 17 | |
MYR 3.46 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 22 |
Loading...
Basic Information
| Nut Type | T-Nuts | Series | MISUMI 6 Series | Nominal of Thread M(mm) | M6 |
|---|---|---|---|---|---|
| Material | Steel | Function | Conductive | Lock | Not Provided |
| Material | SWRCH35K / Carbon Steel Wire |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- 5 Series (Groove Width 6 mm) Metal Stopper for 20/25/40 Square Pre-Assembly Insertion Square Nut
- For 6 Series (Slot Width 8mm) - Toothed Washers (Internal Teeth Type)
- Flanged Nuts - For 6 Series (Slot Width 8mm) Aluminum Frames
- Pre-Assembly Standard Nuts For Aluminum Frames
- Post-Assembly Insertion Nut (Aluminum) (with Lock Function)
- Square Nut (with Stainless Steel Galling Prevention, 50-piece Pack)
- F Nut 40
- Line8 T-Nut ST (TST)
Customers Who Viewed This Item Also Viewed
-
Economy Type Post-Assembly Insertion Screws for 5 (Slot Width 6mm) Aluminum FramesMISUMI
Standard Price : MYR 3.08
Days to Ship : 4 Day(s) or more
-
Economy Type Post-Assembly Insertion Screws for 8 (Slot Width 10mm) Aluminum FramesMISUMI
Standard Price : MYR 4.40
Days to Ship : 2 Day(s) or more
-
Post-Assembly Insertion Screw - For 8 Series (Slot Width 10mm) Aluminum FramesMISUMI
Standard Price : MYR 6.80-
Days to Ship : 1 Day(s) or more
-
Pre-Assembly Insertion Nuts - For 8 Series (Slot Width 10mm) Aluminum FramesMISUMI
Standard Price : MYR 11.40-
Days to Ship : 2 Day(s) or more
-
Pre-Assembly Insertion Nuts - For 6 Series (Slot Width 8mm) Aluminum FramesMISUMI
Standard Price : MYR 7.94-
Days to Ship : 2 Day(s) or more
-
Post Assembly Insertion Screw - For 6 Series (Slot Width 8mm) Aluminum FramesMISUMI
Standard Price : MYR 7.15-
Days to Ship : 2 Day(s) or more
-
Post Assembly Insertion Screw - For 5 Series (Slot Width 6mm) Aluminum FramesMISUMI
Standard Price : MYR 5.72-
Days to Ship : 4 Day(s) or more
-
Flanged Nuts - For 6 Series (Slot Width 8mm) Aluminum FramesMISUMI
Standard Price : MYR 2.01
Days to Ship : 2 Day(s) or more
-
Pre-Assembly Insertion Screw - For 5 Series (Slot Width 6mm) Aluminum FramesMISUMI
Standard Price : MYR 6.07
Days to Ship : 2 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy