(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Bushings for Inspection Components - Stepped and Threaded for Taper Pins - For Tapered (Round)
[Features]·Bushing that can be used in combination with a stepped male thread taper pin.
Part Number
Configured Part Number is shown.
[ ! ]1. Press Fit Type has a 1 ~ 3mm guide part. (D -0.03/-0.05)
[ ! ]2. When wall is 2mm or less {(D−P)/2≤2}, R is 0.5. [ ! ]3. When S=M, I.D. of S dimension will have thread runout.
[ ! ]2. When wall is 2mm or less {(D−P)/2≤2}, R is 0.5. [ ! ]3. When S=M, I.D. of S dimension will have thread runout.
| [ M ] Material | [ H ] Hardness | [ S ] Surface Treatment | Fixing Method | Type | ||
| Round | Dowel Pin | |||||
| S+0.03 +0.01 | SH7 | S+0.03 +0.01 | ||||
| SKS93 Equivalent | 50~60HRC | - | Standard | KJBW | KJBHW | KJBKW |
| Press Fit | KJBPW | KJBPHW | - | |||
| SKS93 Equivalent | 50~60HRC | Electroless Nickel Plating | Standard | KJBWM | KJBHWM | - |
Specifications
| Part Number | - | P | - | S | - | M | - | L | - | L1 | - | B | ||||
| Type | Material Code | D | ||||||||||||||
| KJBW10 | - | P8.00 | - | S5 | - | M4 | - | L8 | - | 4 | - | B10 | ||||
| S | H7 |
| 3~6 | +0.012 0 |
| 7~10 | +0.015 0 |
| 11~18 | +0.018 0 |
| 19 | +0.021 0 |
| Part Number | P | S(S≤P-1) | M | L | L1 | B | R | Compliance with Standard | ||||||||||||
| Type | D | Round | Dowel Pin | |||||||||||||||||
| Straight | S +0.03 +0.01 | SH7 | S +0.03 +0.01 | |||||||||||||||||
| Round | Dowel Pin | KJBW KJBPW | KJBWM | KJBHW KJBPHW | KJBHWM | KJBKW | ||||||||||||||
| S+0.03 +0.01 | SH7 | S+0.03 +0.01 | 0.01mm Increment | 1mm Increment | Selection | 1mm Increment | 1mm Increment | 1mm Increment | ||||||||||||
| KJBW | KJBHW | KJBKW | 8 | 4.00~ 6.00 | 3~ 5 | 3 | 4 | 3~25 (L≤Px2.5) | 3~25 (L+L1≤Sx2.5) | 5~25 (M≤B≤Mx3) For M3 (D8) (M≤B≤Mx2) When S=M L1+B≤Mx3 | 1.0 | ● | ● | ● | ● | - | ||||
| 10 | 5.00~ 8.00 | 4~ 7 | 4 | 5 | 6 | 3~25 (L≤Px3) No R for 3, 4 | 3≤L1<25-L (L+L1≤Sx3) | 2.0 | ● | ● | ● | ● | - | |||||||
| KJBPW | KJBPHW | 12 | 5.00~10.00 | 4~ 9 | 4 | 5 | 6 | 8 | 2.0 | ● | ● | ● | ● | ● | ||||||
| 16 | 8.00~14.00 | 4~13 | 4 | 5 | 6 | 8 | 10 | 12 | 2.0 | ● | ● | ● | ● | ● | ||||||
| KJBWM | KJBHWM | 20 | 10.00~18.00 | 6~17 | 4 | 5 | 6 | 8 | 10 | 12 | 2.0 | ● | ● | ● | ● | ● | ||||
| 25 | 15.00~23.00 | 8~19 | 4 | 5 | 6 | 8 | 10 | 12 | 2.0 | ● | ● | ● | ● | ● | ||||||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| KJBHW8-P[4-6/0.01]-S[3-5/1]-M[3,4]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBHW10-P[5-8/0.01]-S[4-7/1]-M[4,5,6]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBHW12-P[5-10/0.01]-S[4-9/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBHW16-P[8-14/0.01]-S[4-13/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBHW20-P[10-18/0.01]-S[6-17/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBHW25-P[15-23/0.01]-S[8-19/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBHWM8-P[4-6/0.01]-S[3-5/1]-M[3,4]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBHWM10-P[5-8/0.01]-S[4-7/1]-M[4,5,6]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBHWM12-P[5-10/0.01]-S[4-9/1]-M[4,5,6,8]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBHWM16-P[8-14/0.01]-S[4-13/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBHWM20-P[10-18/0.01]-S[6-17/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBHWM25-P[15-23/0.01]-S[8-19/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBKW10-P[5-8/0.01]-S[4-7/1]-M[4,5,6]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBKW12-P[5-10/0.01]-S[4-9/1]-M[4,5,6,8]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBKW16-P[8-14/0.01]-S[4-13/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBKW20-P[10-18/0.01]-S[6-17/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBKW25-P[15-23/0.01]-S[8-19/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBPHW8-P[4-6/0.01]-S[3-5/1]-M[3,4]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBPHW10-P[5-8/0.01]-S[4-7/1]-M[4,5,6]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBPHW12-P[5-10/0.01]-S[4-9/1]-M[4,5,6,8]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBPHW16-P[8-14/0.01]-S[4-13/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBPHW20-P[10-18/0.01]-S[6-17/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBPHW25-P[15-23/0.01]-S[8-19/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBPW8-P[4-6/0.01]-S[3-5/1]-M[3,4]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBPW10-P[5-8/0.01]-S[4-7/1]-M[4,5,6]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBPW12-P[5-10/0.01]-S[4-9/1]-M[4,5,6,8]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBPW16-P[8-14/0.01]-S[4-13/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBPW20-P[10-18/0.01]-S[6-17/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBPW25-P[15-23/0.01]-S[8-19/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBW8-P[4-6/0.01]-S[3-5/1]-M[3,4]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBW10-P[5-8/0.01]-S[4-7/1]-M[4,5,6]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBW12-P[5-10/0.01]-S[4-9/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBW16-P[8-14/0.01]-S[4-13/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBW20-P[10-18/0.01]-S[6-17/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBW25-P[15-23/0.01]-S[8-19/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBWM8-P[4-6/0.01]-S[3-5/1]-M[3,4]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBWM10-P[5-8/0.01]-S[4-7/1]-M[4,5,6]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBWM12-P[5-10/0.01]-S[4-9/1]-M[4,5,6,8]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBWM16-P[8-14/0.01]-S[4-13/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBWM20-P[10-18/0.01]-S[6-17/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| KJBWM25-P[15-23/0.01]-S[8-19/1]-M[4,5,6,8,10,12]-L[3-25/1]-[3-22/1]-B[5-25/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | O.D. Tolerance | Surface Treatment | Type | I.D. Tolerance | Bushing Dia. D (Ø) | B (mm) | I.D. P (Ø) | L (mm) | L1 (mm) | S (mm) | Screw Dia. Selection (Coarse) [M] (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Round, Straight, Standard | H7 | 8 | 5 ～ 25 | 4 ～ 6 | 3 ～ 25 | 3 ～ 22 | 3 ～ 5 | 3 ～ 4 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Round, Straight, Standard | H7 | 10 | 5 ～ 25 | 5 ～ 8 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Round, Straight, Standard | H7 | 12 | 5 ～ 25 | 5 ～ 10 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Round, Straight, Standard | H7 | 16 | 5 ～ 25 | 8 ～ 14 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Round, Straight, Standard | H7 | 20 | 5 ～ 25 | 10 ～ 18 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Round, Straight, Standard | H7 | 25 | 5 ～ 25 | 15 ～ 23 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard | H7 | 8 | 5 ～ 25 | 4 ～ 6 | 3 ～ 25 | 3 ～ 22 | 3 ～ 5 | 3 ～ 4 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard | H7 | 10 | 5 ～ 25 | 5 ～ 8 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard | H7 | 12 | 5 ～ 25 | 5 ～ 10 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 8 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard | H7 | 16 | 5 ～ 25 | 8 ～ 14 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard | H7 | 20 | 5 ～ 25 | 10 ～ 18 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard | H7 | 25 | 5 ～ 25 | 15 ～ 23 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Standard | Not Provided | Dowel Pin, Anti-rotation, Straight, Standard | +0.03/+0.01 | 10 | 5 ～ 25 | 5 ～ 8 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Dowel Pin, Anti-rotation, Straight, Standard | +0.03/+0.01 | 12 | 5 ～ 25 | 5 ～ 10 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Dowel Pin, Anti-rotation, Straight, Standard | +0.03/+0.01 | 16 | 5 ～ 25 | 8 ～ 14 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Dowel Pin, Anti-rotation, Straight, Standard | +0.03/+0.01 | 20 | 5 ～ 25 | 10 ～ 18 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Dowel Pin, Anti-rotation, Straight, Standard | +0.03/+0.01 | 25 | 5 ～ 25 | 15 ～ 23 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Press Fit | Not Provided | Round, Straight, Press Fit | H7 | 8 | 5 ～ 25 | 4 ～ 6 | 3 ～ 25 | 3 ～ 22 | 3 ～ 5 | 3 ～ 4 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Press Fit | Not Provided | Round, Straight, Press Fit | H7 | 10 | 5 ～ 25 | 5 ～ 8 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Press Fit | Not Provided | Round, Straight, Press Fit | H7 | 12 | 5 ～ 25 | 5 ～ 10 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Press Fit | Not Provided | Round, Straight, Press Fit | H7 | 16 | 5 ～ 25 | 8 ～ 14 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Press Fit | Not Provided | Round, Straight, Press Fit | H7 | 20 | 5 ～ 25 | 10 ～ 18 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Press Fit | Not Provided | Round, Straight, Press Fit | H7 | 25 | 5 ～ 25 | 15 ～ 23 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Press Fit | Not Provided | Round, Straight, Press Fit | +0.03/+0.01 | 8 | 5 ～ 25 | 4 ～ 6 | 3 ～ 25 | 3 ～ 22 | 3 ～ 5 | 3 ～ 4 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Press Fit | Not Provided | Round, Straight, Press Fit | +0.03/+0.01 | 10 | 5 ～ 25 | 5 ～ 8 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Press Fit | Not Provided | Round, Straight, Press Fit | +0.03/+0.01 | 12 | 5 ～ 25 | 5 ～ 10 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 8 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Press Fit | Not Provided | Round, Straight, Press Fit | +0.03/+0.01 | 16 | 5 ～ 25 | 8 ～ 14 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Press Fit | Not Provided | Round, Straight, Press Fit | +0.03/+0.01 | 20 | 5 ～ 25 | 10 ～ 18 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Press Fit | Not Provided | Round, Straight, Press Fit | +0.03/+0.01 | 25 | 5 ～ 25 | 15 ～ 23 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Round, Straight, Standard | +0.03/+0.01 | 8 | 5 ～ 25 | 4 ～ 6 | 3 ～ 25 | 3 ～ 22 | 3 ～ 5 | 3 ～ 4 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Round, Straight, Standard | +0.03/+0.01 | 10 | 5 ～ 25 | 5 ～ 8 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Round, Straight, Standard | +0.03/+0.01 | 12 | 5 ～ 25 | 5 ～ 10 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Round, Straight, Standard | +0.03/+0.01 | 16 | 5 ～ 25 | 8 ～ 14 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Round, Straight, Standard | +0.03/+0.01 | 20 | 5 ～ 25 | 10 ～ 18 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Not Provided | Round, Straight, Standard | +0.03/+0.01 | 25 | 5 ～ 25 | 15 ～ 23 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard | +0.03/+0.01 | 8 | 5 ～ 25 | 4 ～ 6 | 3 ～ 25 | 3 ～ 22 | 3 ～ 5 | 3 ～ 4 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard | +0.03/+0.01 | 10 | 5 ～ 25 | 5 ～ 8 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard | +0.03/+0.01 | 12 | 5 ～ 25 | 5 ～ 10 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard | +0.03/+0.01 | 16 | 5 ～ 25 | 8 ～ 14 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard | +0.03/+0.01 | 20 | 5 ～ 25 | 10 ～ 18 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard | +0.03/+0.01 | 25 | 5 ～ 25 | 15 ～ 23 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 |
Loading...
Basic Information
| Basic Shape | Straight | Hole Shape | Circular Shape | Hole Type | 2-Step |
|---|---|---|---|---|---|
| With or w/o Tap | Tapped | Material | Steel | Hardness | Provided |
| Material | SKS93 Equivalent | Hardness Details | 50~60HRC |
Specification/Dimensions
-
O.D. Tolerance
- Standard
- Press Fit
-
Surface Treatment
- Not Provided
- Electroless Nickel Plating
-
Type
- Dowel Pin, Anti-rotation, Straight, Standard
- Round, Straight, Press Fit
- Round, Straight, Standard
-
I.D. Tolerance
- +0.03/+0.01
- H7
-
Bushing Dia. D(Ø)
-
B(mm)
-
I.D. P(Ø)
-
L(mm)
-
L1(mm)
-
S(mm)
-
Screw Dia. Selection (Coarse) [M](mm)
-
type
- KJBHW
- KJBHWM
- KJBKW
- KJBPHW
- KJBPW
- KJBW
- KJBWM
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Bushings for Inspection Components - For Plastic Panels
- Bushings for Inspection Components - Threaded Bushings
- Bushings for Inspection Components - Shouldered - Standard Type
- Bushings for Inspection Components - Shouldered - Press Fit Type
- Bushings for Inspection Components - Stepped and Threaded for Straight Pins - Straight Type with Shoulder
- Bushings for Inspection Components - Oval - Straight (Dowel Pin / D Cut)
- Bushings for Inspection Components - Square - Straight (Dowel Pin / D Cut)
- Bushings for Inspection Components - Square - Shouldered (Dowel Pin)
Complementary Products
-
![[High Precision] X-Axis Cross Roller - Micrometer Head](//content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 949.56- Days to Ship : 6 Day(s) or more
-
Shock Absorption Stoppers - Hex Socket Head Cap Screws with Low Elastic Rubber Head
MISUMI Standard Price : MYR 45.03- Days to Ship : 1 Day(s) or more
-
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more
![[High Precision] X-Axis Cross Roller - Micrometer Head](http://content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
Customers Who Viewed This Item Also Viewed
-
Slot Pins for Inspection Components - Threaded, Tapered (Round / Rotating, Diamond-Shaped)MISUMI
Days to Ship : 6 Day(s) or more
-
Bushings for Inspection Components - Stepped and Threaded for Straight Pins - For StraightMISUMI
Days to Ship : 6 Day(s) or more
-
Bushings for Inspection Components - Stepped and Threaded for Taper Pins - Tapered Type with Shoulder (Dowel Pin)MISUMI
Days to Ship : 6 Day(s) or more
-
-
Bushings for Inspection Components - Straight - Standard TypeMISUMI
Days to Ship : 2 Day(s) or more
-
Slot Pins for Inspection Components - Straight Threaded with Step, One-Step TypeMISUMI
Days to Ship : 7 Day(s) or more
-
Bushings for Inspection Components - Stepped and Threaded for Straight Pins - Straight Type with ShoulderMISUMI
Days to Ship : 6 Day(s) or more
-
-
Slot Pins for Inspection Components - Clamp Type (Straight / Tapered) - Diamond / Round TaperedMISUMI
Days to Ship : 7 Day(s) or more
-
Bushings for Inspection Components - Stepped Straight (Standard)MISUMI
Days to Ship : 6 Day(s) or more
-
Slot Pins for Inspection Components - Straight Threaded with Step, 2-Step TypeMISUMI
Days to Ship : 6 Day(s) or more
-
Slot Pins for Inspection Components - Stepped Straight, Handle Length SelectableMISUMI
Days to Ship : 7 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy