(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.　

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Height Adjusting Pins - Flat, Tip Set Screw - Threaded

Height Adjusting Pins - Flat, Tip Set Screw - Threaded

MISUMI

MISUMI

With Wrench Flats. Locating is possible by attaching a pin on the tip or by Flat Tip adjustment.

PDFP.1-1676-2014

Part Number

Configured Part Number is shown.

Support Pins - Flat, Tip Set Screw - Threaded:Related Image
[ ! ]The range of L dimension should be within 0.02 for same orders.
 
[ M ]Material[ S ]Surface Treatment[ H ]HardnessFlatTip Set Screw Type
ThreadedThreaded with PilotThreaded
①S45C EquivalentBlack Oxide-STPABSTPDBSPFAB
②S45C EquivalentHard Chrome PlatingPlating Hardness: 750HV ~STPARSTPDR-
③S45C EquivalentBlack OxideTreated Hardness: 45 ~ 50HRCSTPAHBSTPDHB-
④S45C EquivalentHard Chrome PlatingTreated Hardness: 45 ~ 50HRC /
Plating Hardness: 750HV ~		STPAHRSTPDHR-
⑤SUS304--STPASUSTPDSU-
⑥SUS440C or 13Cr stainless-Treated Hardness: 50 ~ 55HRCSTPACSTPDC-
[ ! ]SUS304 may not be polished.

Specifications

Part Number-L-P-B 
STPAB10
SPFAB12		-
-		L20.03
L20.01
-
P6
-
B5		(Flat)
(Tip Set Screw)
◆Threaded
Recommended Tightening Torque (Reference)
M (Coarse)Tightening Torque
N • cm
M3   98
M4  225
M5  461
M6  784
M8 1911
M10 3783
M12 6605
M1616366
M2032928
[ ! ]The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >> P.2297.) Not applicable when using locking materials or lock washers.
■Flat
Part NumberL
0.01mm Increment		M (Coarse)dM3 (Coarse)FWℓ
TypeD
Threaded
STPAB
STPAR
STPAHB
STPAHR
STPASU
STPAC		Threaded with Pilot
STPDB
STPDR
STPDHB
STPDHR
STPDSU
STPDC		610.00~50.00M33M31.558
8M55M5278
1020.00~80.00M56M6388
12M58M841010
15M810M1051310
20M812M1251710
■Tip Set Screw
Part NumberL
0.01mm Increment		P SelectionB
0.5mm Increment		dFM1 (Coarse)WℓAN (Coarse)
TypeD
Threaded
SPFAB		1220.00~80.0064.0~6.084M8101010M3
1520.00~80.0085.0~10.0105M10131015M4
2025.00~80.0010 125.0~15.0125M12171020M4
2530.00~80.0012 165.0~19.0165M16201224M4
3035.00~80.0016 205.0~23.0206M20241828M4

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
SPFAB12-L[20-80/0.01]-P6-B[4-6/0.5]
SPFAB15-L[20-80/0.01]-P8-B[5-10/0.5]
SPFAB20-L[25-80/0.01]-P[10,​12]-B[5-15/0.5]
SPFAB25-L[30-80/0.01]-P[12,​16]-B[5-19/0.5]
SPFAB30-L[35-80/0.01]-P[16,​20]-B[5-23/0.5]
STPAB6-L[10-50/0.01]
STPAB8-L[10-50/0.01]
STPAB10-L[20-80/0.01]
STPAB12-L[20-80/0.01]
STPAB15-L[20-80/0.01]
STPAB20-L[20-80/0.01]
STPAC6-L[10-50/0.01]
STPAC8-L[10-50/0.01]
STPAC10-L[20-80/0.01]
STPAC12-L[20-80/0.01]
STPAC15-L[20-80/0.01]
STPAC20-L[20-80/0.01]
STPAHB6-L[10-50/0.01]
STPAHB8-L[10-50/0.01]
STPAHB10-L[20-80/0.01]
STPAHB12-L[20-80/0.01]
STPAHB15-L[20-80/0.01]
STPAHB20-L[20-80/0.01]
STPAHR6-L[10-50/0.01]
STPAHR8-L[10-50/0.01]
STPAHR10-L[20-80/0.01]
STPAHR12-L[20-80/0.01]
STPAHR15-L[20-80/0.01]
STPAHR20-L[20-80/0.01]
STPAR6-L[10-50/0.01]
STPAR8-L[10-50/0.01]
STPAR10-L[20-80/0.01]
STPAR12-L[20-80/0.01]
STPAR15-L[20-80/0.01]
STPAR20-L[20-80/0.01]
STPASU6-L[10-50/0.01]
STPASU8-L[10-50/0.01]
STPASU10-L[20-80/0.01]
STPASU12-L[20-80/0.01]
STPASU15-L[20-80/0.01]
STPASU20-L[20-80/0.01]
STPDB6-L[10-50/0.01]
STPDB8-L[10-50/0.01]
STPDB10-L[20-80/0.01]
STPDB12-L[20-80/0.01]
STPDB15-L[20-80/0.01]
STPDB20-L[20-80/0.01]
STPDC6-L[10-50/0.01]
STPDC8-L[10-50/0.01]
STPDC10-L[20-80/0.01]
STPDC12-L[20-80/0.01]
STPDC15-L[20-80/0.01]
STPDC20-L[20-80/0.01]
STPDHB6-L[10-50/0.01]
STPDHB8-L[10-50/0.01]
STPDHB10-L[20-80/0.01]
STPDHB12-L[20-80/0.01]
STPDHB15-L[20-80/0.01]
STPDHB20-L[20-80/0.01]
STPDHR6-L[10-50/0.01]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSTip Shape Material Surface Treatment Hardening Hardness Outer Dia. D
(mm) 		B
(mm) 		L
(mm) 		P
(mm)

-

1 Piece(s) 9 Day(s) or more 10Tip Set Screw[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided124 ～ 620 ～ 806

-

1 Piece(s) 9 Day(s) or more 10Tip Set Screw[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided155 ～ 1020 ～ 808

-

1 Piece(s) 9 Day(s) or more 10Tip Set Screw[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided205 ～ 1525 ～ 8010 ～ 12

-

1 Piece(s) 9 Day(s) or more 10Tip Set Screw[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided255 ～ 1930 ～ 8012 ～ 16

-

1 Piece(s) 9 Day(s) or more 10Tip Set Screw[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided305 ～ 2335 ～ 8016 ～ 20

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided6-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided8-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided10-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided12-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided15-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided20-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC6-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC8-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC10-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC12-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC15-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC20-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC6-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC8-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC10-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC12-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC15-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC20-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~6-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~8-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~10-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~12-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~15-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~20-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV6-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV8-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV10-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV12-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV15-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV20-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS304Not ProvidedNot ProvidedNot Provided6-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS304Not ProvidedNot ProvidedNot Provided8-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS304Not ProvidedNot ProvidedNot Provided10-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS304Not ProvidedNot ProvidedNot Provided12-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS304Not ProvidedNot ProvidedNot Provided15-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS304Not ProvidedNot ProvidedNot Provided20-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided6-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided8-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided10-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided12-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided15-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided20-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC6-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC8-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC10-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC12-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC15-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC20-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC6-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC8-10 ～ 50-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC10-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC12-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC15-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC20-20 ～ 80-

-

1 Piece(s) 7 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~6-10 ～ 50-

Loading...

  1. 1
  2. 2
  3. Next >>
 

Basic Information

Shape Support Pin Mounting Type Threaded Height Tolerance 0/+0.05

Configure

Clear All

77 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Tip Shape

    • Flat
    • Tip Set Screw

    Clear

  • Material

    • Steel
      • S45C Equivalent
    • Stainless Steel
      • SUS304
      • SUS440C or 13Cr stainless

    Clear

  • Surface Treatment

    • Not Provided
    • Hard Chrome Plating
    • Black Oxide

    Clear

  • Hardening

    • Provided
    • Not Provided

    Clear

  • Hardness

    • Treated Hardness: 45 ~ 50HRC
    • Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~
    • Treated Hardness: 50 ~ 55HRC
    • Plating Hardness: 750HV
    • Not Provided

    Clear

  • Outer Dia. D(mm)

    • 6
    • 8
    • 10
    • 12
    • 15
    • 20
    • 25
    • 30

    Clear

  • B(mm)

     [4-23/0.5mm Unit(s)]

    Clear

  • L(mm)

     [10-80/0.01mm Unit(s)]

    Clear

  • P(mm)

    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • type

    • SPFAB
    • STPAB
    • STPAC
    • STPAHB
    • STPAHR
    • STPAR
    • STPASU
    • STPDB
    • STPDC
    • STPDHB
    • STPDHR
    • STPDR
    • STPDSU

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 7 Day(s) or Less
    • 9 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel：(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)
Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.