(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Hex Support Pins - Stepped
With Wrench Flats. Upper positioning is possible by selecting Tip Shape.
Part Number
Configured Part Number is shown.
| [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Pilot |
| ①S45C | Black Oxide | - | LSPB |
| ②S45C | Hard Chrome Plating | Plating Hardness: 750HV ~ | LSPBR |
| ③S45C | Black Oxide | Treated Hardness: 45 ~ 50HRC | LSPBHB |
| ④S45C | Hard Chrome Plating | Treated Hardness: 45 ~ 50HRC / Plating Hardness: 750HV ~ | LSPBHR |
| ⑤SUS304 | - | - | LSPBSU |
| ⑥SUS440C or 13Cr stainless | - | Treated Hardness: 50 ~ 55HRC | LSPBSC |
Specifications
| Part Number | - | L | - | P | - | B | - | E | - | A |
| LSPBC12 | - | L25.01 | - | P8.00 | - | B10 |
◆Tapped, Threaded
Recommended Tightening Torque (Reference)
[ ! ]The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >> P.2297.) Not applicable when using locking materials or lock washers.
Recommended Tightening Torque (Reference)
| M (Coarse) | Tightening Torque N • cm |
| M3 | 98 |
| M4 | 225 |
| M5 | 461 |
| M6 | 784 |
| M8 | 1911 |
| M10 | 3783 |
| M12 | 6605 |
| M16 | 16366 |
| M20 | 32928 |
| Part Number | L 0.01mm Increment | P 0.01mm Increment | B 0.1mm Increment | E 0.1mm Increment (Shape A only) | A Selection (Shape A only) | R (Shape C) | d | M1 (Coarse) | ℓ1 | W | ℓ2 | ||
| Type | Tip Shape | D | |||||||||||
| Pilot LSPB LSPBR LSPBHB LSPBHR LSPBSU LSPBSC | A B C | 10 | 20.00~80.00 | 4.00~8.00 | 2.0~20.0 | 0.5~10.0 | 15 30 45 60 | 1.5 | 6 | M3 | 6 | 8 | 8 |
| 12 | 4.00~10.00 | 2.0~20.0 | 1.5 | 8 | M5 | 6 | 10 | 10 | |||||
| 15 | 5.00~10.00 | 2.0~25.0 | 2 | 10 | M5 | 9 | 13 | 10 | |||||
| 20 | 8.00~15.00 | 2.0~30.0 | 3 | 12 | M8 | 9 | 17 | 10 | |||||
| 25 | 10.00~15.00 | 2.0~30.0 | 4 | 16 | M8 | 9 | 20 | 10 | |||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| LSPBA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1] |
| LSPBB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1] |
| LSPBB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1] |
| LSPBB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1] |
| LSPBB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1] |
| LSPBC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1] |
| LSPBC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1] |
| LSPBC15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1] |
| LSPBC20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1] |
| LSPBC25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1] |
| LSPBHBA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBHBA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBHBA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBHBA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBHBA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBHBB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1] |
| LSPBHBB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1] |
| LSPBHBB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1] |
| LSPBHBB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1] |
| LSPBHBB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1] |
| LSPBHBC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1] |
| LSPBHBC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1] |
| LSPBHBC15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1] |
| LSPBHBC20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1] |
| LSPBHBC25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1] |
| LSPBHRA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBHRA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBHRA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBHRA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBHRA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBHRB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1] |
| LSPBHRB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1] |
| LSPBHRB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1] |
| LSPBHRB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1] |
| LSPBHRB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1] |
| LSPBHRC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1] |
| LSPBHRC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1] |
| LSPBHRC15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1] |
| LSPBHRC20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1] |
| LSPBHRC25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1] |
| LSPBRA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBRA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBRA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBRA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBRA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60] |
| LSPBRB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1] |
| LSPBRB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1] |
| LSPBRB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1] |
| LSPBRB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1] |
| LSPBRB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1] |
| LSPBRC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1] |
| LSPBRC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1] |
| LSPBRC15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1] |
| LSPBRC20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1] |
| LSPBRC25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Tip Shape | Material | Surface Treatment | Hardening | Hardness | Outer Dia. D (mm) | A (°) | B (mm) | E (mm) | L (mm) | P (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 10 | 15 ～ 60 | 2 ～ 20 | 0.5 ～ 10 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 12 | 15 ～ 60 | 2 ～ 20 | 0.5 ～ 10 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 15 | 15 ～ 60 | 2 ～ 25 | 0.5 ～ 10 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 20 | 15 ～ 60 | 2 ～ 30 | 0.5 ～ 10 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 25 | 15 ～ 60 | 2 ～ 30 | 0.5 ～ 10 | 20 ～ 80 | 10 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 10 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 12 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 15 | - | 2 ～ 25 | - | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 20 | - | 2 ～ 30 | - | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 25 | - | 2 ～ 30 | - | 20 ～ 80 | 10 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 10 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 12 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 15 | - | 2 ～ 25 | - | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 20 | - | 2 ～ 30 | - | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 25 | - | 2 ～ 30 | - | 20 ～ 80 | 10 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 10 | 15 ～ 60 | 2 ～ 20 | 0.5 ～ 10 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 12 | 15 ～ 60 | 2 ～ 20 | 0.5 ～ 10 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 15 | 15 ～ 60 | 2 ～ 25 | 0.5 ～ 10 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 20 | 15 ～ 60 | 2 ～ 30 | 0.5 ～ 10 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 25 | 15 ～ 60 | 2 ～ 30 | 0.5 ～ 10 | 20 ～ 80 | 10 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 10 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 12 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 15 | - | 2 ～ 25 | - | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 20 | - | 2 ～ 30 | - | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 25 | - | 2 ～ 30 | - | 20 ～ 80 | 10 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 10 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 12 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 15 | - | 2 ～ 25 | - | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 20 | - | 2 ～ 30 | - | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 25 | - | 2 ～ 30 | - | 20 ～ 80 | 10 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 10 | 15 ～ 60 | 2 ～ 20 | 0.5 ～ 10 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 12 | 15 ～ 60 | 2 ～ 20 | 0.5 ～ 10 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 15 | 15 ～ 60 | 2 ～ 25 | 0.5 ～ 10 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 20 | 15 ～ 60 | 2 ～ 30 | 0.5 ～ 10 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 25 | 15 ～ 60 | 2 ～ 30 | 0.5 ～ 10 | 20 ～ 80 | 10 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 10 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 12 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 15 | - | 2 ～ 25 | - | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 20 | - | 2 ～ 30 | - | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 25 | - | 2 ～ 30 | - | 20 ～ 80 | 10 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 10 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 12 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 15 | - | 2 ～ 25 | - | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 20 | - | 2 ～ 30 | - | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~ | 25 | - | 2 ～ 30 | - | 20 ～ 80 | 10 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 10 | 15 ～ 60 | 2 ～ 20 | 0.5 ～ 10 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 12 | 15 ～ 60 | 2 ～ 20 | 0.5 ～ 10 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 15 | 15 ～ 60 | 2 ～ 25 | 0.5 ～ 10 | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 20 | 15 ～ 60 | 2 ～ 30 | 0.5 ～ 10 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Tapered | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 25 | 15 ～ 60 | 2 ～ 30 | 0.5 ～ 10 | 20 ～ 80 | 10 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 10 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 12 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 15 | - | 2 ～ 25 | - | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 20 | - | 2 ～ 30 | - | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Spherical | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 25 | - | 2 ～ 30 | - | 20 ～ 80 | 10 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 10 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 12 | - | 2 ～ 20 | - | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 15 | - | 2 ～ 25 | - | 20 ～ 80 | 5 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 20 | - | 2 ～ 30 | - | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) or more | 10 | Taper R | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 25 | - | 2 ～ 30 | - | 20 ～ 80 | 10 ～ 15 |
Loading...
Basic Information
| Shape | Support Pin | Mounting Type | With Pilot, Tapped | Height Tolerance | 0/+0.05 |
|---|
Specification/Dimensions
-
Tip Shape
-
Tapered -
Taper R -
Spherical
-
-
Material
- Steel
- Stainless Steel
- Steel
-
Surface Treatment
-
Hardening
- Provided
- Not Provided
-
Hardness
-
Outer Dia. D(mm)
-
A(°)
-
B(mm)
-
E(mm)
-
L(mm)
-
P(mm)
-
type
- LSPBA
- LSPBB
- LSPBC
- LSPBHBA
- LSPBHBB
- LSPBHBC
- LSPBHRA
- LSPBHRB
- LSPBHRC
- LSPBRA
- LSPBRB
- LSPBRC
- LSPBSCA
- LSPBSCB
- LSPBSCC
- LSPBSUA
- LSPBSUB
- LSPBSUC
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Height Adjusting Pins - Round, Wrench Flats Tapped
- Height Adjusting Pins - Hex - Threaded - High Accuracy
- Height Adjusting Pins-Height Adjusting Caps
- Height Adjusting Pins-Hex/Medium Accuracy/Tapped
- Support Pins - Stepped, Configurable, Straight - Tapped
- Strut Pin Tip Shape Selectable Type -Male Thread-
- Strut Pin Tip Shape Selectable Type -Female Thread-
- Height Adjusting Pins - Flat, Tip Set Screw - Threaded
Complementary Products
-
Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded
MISUMI Days to Ship : 6 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
-
-
-
Locating Pins - Large/Small Head, Tapered (Set Screw-Circumference Groove Shape)MISUMI
Days to Ship : 3 Day(s) or more
-
-
-
-
-
-
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy