(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Locating Pins - Press Fit (Part Numbers)
- Locating Pins - Press Fit from MISUMI.
- Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole sometimes not available for SUS304.
- Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).
(i)Caution
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Configured Part Number is shown.
●Press Fit
When D<3
a＝0.5
d＝D－0.1
[ ! ]Relief dimension is a reference value.
When D≥3
a＝1.0
d＝D－0.2
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]Polishing and centering hole may not be provided.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type |
| Press Fit | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | KFFA |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV~ | GKFFA |
| (3) | SKS3 Equivalent | - | - | BKFFA |
| (4) | SUS304 | - | - | SKFFA |
| (5) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | CKFFA |
Specifications
| Part Number | - | P | - | L | - | B | ||||||
| Type | D Tol. | P Tol. | D | |||||||||
| KFFA | M | S | 6 | - | P8.00 | - | L8 | - | B6.0 | |||
■Tolerance Selection
| D or P | Standard Grade | Precision Grade | |||||
| M | P | G | H | S | A | B | |
| m6 | p6 | g6 | h7 | - | - | - | |
| 1.00 ~ 3.00 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 0 -0.010 | 0 -0.01 | +0.005 0 | 0 -0.005 |
| 3.01 ~ 6.00 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 | |||
| 6.01 ~ 10.00 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 | |||
| 10.01 ~ 18.00 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 | 0 -0.018 | |||
| 18.01 ~ 30.00 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 | 0 -0.021 | |||
■Press Fit
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | |||
| Type | D Tolerance Selection | P Tolerance Selection | D | ||||
| KFFA GKFFA* BKFFA SKFFA CKFFA | M P G H *A *B | S M P G H *A *B | 1 | 1.50~3.00 | 2, 3 | 2.0~5.0 | 0.1 |
| 2 | 2.50~6.00 | 2~6 | 2.0~15.0 | 0.5 | |||
| 3 | 3.50~8.00 | 3~10 | 2.0~15.0 | 1 | |||
| 4 | 4.50~8.00 | 3(4)~14 | 2.0~15.0 | 1 | |||
| 5 | 5.50~10.00 | 5~15 | 2.0~15.0 | 1 | |||
| 6 | 6.50~10.00 | 5~15 | 2.0~30.0 | 1 | |||
| 8 | 8.50~15.00 | 5~16 | 2.0~30.0 | 1.5 | |||
| 10 | 11.00~17.00 | 5~20 | 3.0~30.0 | 2 | |||
| 12 | 13.00~18.00 | 6~24 | 3.0~30.0 | 2 | |||
| 13 | 14.00~20.00 | 7~26 | 5.0~30.0 | 2 | |||
| 16 | 17.00~27.00 | 8~32 | 5.0~35.0 | 3 | |||
| 20 | 22.00~30.00 | 10~40 | 5.0~40.0 | 3 | |||
[ NG ]Hard Chrome Plating products are not available for * marked Precision Grade (Precision Grade A and B).
Alterations
| Alterations | Insertion Guide | Air Vent | C-Chamfered Size | Radius | ||||||
 |  |  |  | |||||||
| Code | GDC | AC | CN | RC | ||||||
| Spec. | Adds the insertion guide. Ordering Code GDC [ NG ] Not applicable when D≤2 [ NG ] Not applicable to threaded Type.
| Adds an air vent. Ordering Code AC [ NG ] Not applicable to threaded type. | Changes to C chamfering at P dimension to 0.5 or less. Ordering Code CN [ ! ] Press Fit D≥3 For Threaded Type, this Alteration is applicable when D≥4. type when D ≥ 4 [ NG ] Not applicable to D dimension part. | Changes the relief to R0.5. Ordering Code RC |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| CKFFAGM1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1] |
| CKFFAGM2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFFAGM3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFFAGM4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFFAGM5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFFAGM6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFFAGM8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFFAGM10-P[11-15/0.01]-L[10-20/1]-B[2-20/0.1] |
| CKFFAGM12-P[13-16/0.01]-L[12-24/1]-B[2-30/0.1] |
| CKFFAGM13-P[14-18/0.01]-L[13-26/1]-B[2-30/0.1] |
| CKFFAGM16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1] |
| CKFFAGM20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1] |
| CKFFAGP1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1] |
| CKFFAGP2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFFAGP3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFFAGP4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFFAGP5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFFAGP6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFFAGP8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFFAGP10-P[11-15/0.01]-L[10-20/1]-B[2-20/0.1] |
| CKFFAGP12-P[13-16/0.01]-L[12-24/1]-B[2-30/0.1] |
| CKFFAGP13-P[14-18/0.01]-L[13-26/1]-B[2-30/0.1] |
| CKFFAGP16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1] |
| CKFFAGP20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1] |
| CKFFAGS1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1] |
| CKFFAGS2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFFAGS3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFFAGS4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFFAGS5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFFAGS6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFFAGS8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFFAGS10-P[11-15/0.01]-L[10-20/1]-B[2-20/0.1] |
| CKFFAGS12-P[13-16/0.01]-L[12-24/1]-B[2-30/0.1] |
| CKFFAGS13-P[14-18/0.01]-L[13-26/1]-B[2-30/0.1] |
| CKFFAGS16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1] |
| CKFFAGS20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1] |
| CKFFAHA1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1] |
| CKFFAHA2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFFAHA3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFFAHA4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFFAHA5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFFAHA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFFAHA8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFFAHA10-P[11-15/0.01]-L[10-20/1]-B[2-20/0.1] |
| CKFFAHA12-P[13-16/0.01]-L[12-24/1]-B[2-30/0.1] |
| CKFFAHA13-P[14-18/0.01]-L[13-26/1]-B[2-30/0.1] |
| CKFFAHA16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1] |
| CKFFAHA20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1] |
| CKFFAHB1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1] |
| CKFFAHB2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFFAHB3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFFAHB4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFFAHB5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFFAHB6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFFAHB8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFFAHB10-P[11-15/0.01]-L[10-20/1]-B[2-20/0.1] |
| CKFFAHB12-P[13-16/0.01]-L[12-24/1]-B[2-30/0.1] |
| CKFFAHB13-P[14-18/0.01]-L[13-26/1]-B[2-30/0.1] |
| CKFFAHB16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1] |
| CKFFAHB20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1] |
| CKFFAHG1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1] |
| CKFFAHG2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFFAHG3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFFAHG4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFFAHG5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFFAHG6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFFAHG8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFFAHG10-P[11-15/0.01]-L[10-20/1]-B[2-20/0.1] |
| CKFFAHG12-P[13-16/0.01]-L[12-24/1]-B[2-30/0.1] |
| CKFFAHG13-P[14-18/0.01]-L[13-26/1]-B[2-30/0.1] |
| CKFFAHG16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1] |
| CKFFAHG20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1] |
| CKFFAHH1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1] |
| CKFFAHH2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFFAHH3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFFAHH4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFFAHH5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFFAHH6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFFAHH8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFFAHH10-P[11-15/0.01]-L[10-20/1]-B[2-20/0.1] |
| CKFFAHH12-P[13-16/0.01]-L[12-24/1]-B[2-30/0.1] |
| CKFFAHH13-P[14-18/0.01]-L[13-26/1]-B[2-30/0.1] |
| CKFFAHH16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1] |
| CKFFAHH20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1] |
| CKFFAHM1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1] |
| CKFFAHM2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFFAHM3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFFAHM4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFFAHM5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFFAHM6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Surface Treatment | Heat Treatment | Material | Locating Side O.D. Tolerance | Mounting Side Outer Dia. D (mm) | Mounting Side Tolerance | B | L | Locating Side Outer Dia. P (Ø) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 5 Day(s) or more | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 1 | g6 | 2 ～ 5 | 2 ～ 3 | 1.5 ～ 2.5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 2 | g6 | 2 ～ 10 | 2 ～ 6 | 2.5 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 3 | g6 | 2 ～ 10 | 3 ～ 6 | 3.5 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 4 | g6 | 2 ～ 10 | 4 ～ 8 | 4.5 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 5 | g6 | 2 ～ 10 | 5 ～ 10 | 5.5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 6 | g6 | 2 ～ 12 | 6 ～ 12 | 6.5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 8 | g6 | 2 ～ 15 | 8 ～ 16 | 9 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 10 | g6 | 2 ～ 20 | 10 ～ 20 | 11 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 12 | g6 | 2 ～ 30 | 12 ～ 24 | 13 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 13 | g6 | 2 ～ 30 | 13 ～ 26 | 14 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 16 | g6 | 5 ～ 35 | 16 ～ 32 | 17 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 20 | g6 | 5 ～ 40 | 20 ～ 40 | 22 ～ 30 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 1 | g6 | 2 ～ 5 | 2 ～ 3 | 1.5 ～ 2.5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 2 | g6 | 2 ～ 10 | 2 ～ 6 | 2.5 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 3 | g6 | 2 ～ 10 | 3 ～ 6 | 3.5 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 4 | g6 | 2 ～ 10 | 4 ～ 8 | 4.5 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 5 | g6 | 2 ～ 10 | 5 ～ 10 | 5.5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 6 | g6 | 2 ～ 12 | 6 ～ 12 | 6.5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 8 | g6 | 2 ～ 15 | 8 ～ 16 | 9 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 10 | g6 | 2 ～ 20 | 10 ～ 20 | 11 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 12 | g6 | 2 ～ 30 | 12 ～ 24 | 13 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 13 | g6 | 2 ～ 30 | 13 ～ 26 | 14 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 16 | g6 | 5 ～ 35 | 16 ～ 32 | 17 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 20 | g6 | 5 ～ 40 | 20 ～ 40 | 22 ～ 30 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 1 | g6 | 2 ～ 5 | 2 ～ 3 | 1.5 ～ 2.5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 2 | g6 | 2 ～ 10 | 2 ～ 6 | 2.5 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 3 | g6 | 2 ～ 10 | 3 ～ 6 | 3.5 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 4 | g6 | 2 ～ 10 | 4 ～ 8 | 4.5 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 5 | g6 | 2 ～ 10 | 5 ～ 10 | 5.5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 6 | g6 | 2 ～ 12 | 6 ～ 12 | 6.5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 8 | g6 | 2 ～ 15 | 8 ～ 16 | 9 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 10 | g6 | 2 ～ 20 | 10 ～ 20 | 11 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 12 | g6 | 2 ～ 30 | 12 ～ 24 | 13 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 13 | g6 | 2 ～ 30 | 13 ～ 26 | 14 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 16 | g6 | 5 ～ 35 | 16 ～ 32 | 17 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 20 | g6 | 5 ～ 40 | 20 ～ 40 | 22 ～ 30 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 1 | h7 | 2 ～ 5 | 2 ～ 3 | 1.5 ～ 2.5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 2 | h7 | 2 ～ 10 | 2 ～ 6 | 2.5 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 3 | h7 | 2 ～ 10 | 3 ～ 6 | 3.5 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 4 | h7 | 2 ～ 10 | 4 ～ 8 | 4.5 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 5 | h7 | 2 ～ 10 | 5 ～ 10 | 5.5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 6 | h7 | 2 ～ 12 | 6 ～ 12 | 6.5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 8 | h7 | 2 ～ 15 | 8 ～ 16 | 9 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 10 | h7 | 2 ～ 20 | 10 ～ 20 | 11 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 12 | h7 | 2 ～ 30 | 12 ～ 24 | 13 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 13 | h7 | 2 ～ 30 | 13 ～ 26 | 14 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 16 | h7 | 5 ～ 35 | 16 ～ 32 | 17 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 20 | h7 | 5 ～ 40 | 20 ～ 40 | 22 ～ 30 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 1 | h7 | 2 ～ 5 | 2 ～ 3 | 1.5 ～ 2.5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 2 | h7 | 2 ～ 10 | 2 ～ 6 | 2.5 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 3 | h7 | 2 ～ 10 | 3 ～ 6 | 3.5 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 4 | h7 | 2 ～ 10 | 4 ～ 8 | 4.5 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 5 | h7 | 2 ～ 10 | 5 ～ 10 | 5.5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 6 | h7 | 2 ～ 12 | 6 ～ 12 | 6.5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 8 | h7 | 2 ～ 15 | 8 ～ 16 | 9 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 10 | h7 | 2 ～ 20 | 10 ～ 20 | 11 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 12 | h7 | 2 ～ 30 | 12 ～ 24 | 13 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 13 | h7 | 2 ～ 30 | 13 ～ 26 | 14 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 16 | h7 | 5 ～ 35 | 16 ～ 32 | 17 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 20 | h7 | 5 ～ 40 | 20 ～ 40 | 22 ～ 30 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 1 | h7 | 2 ～ 5 | 2 ～ 3 | 1.5 ～ 2.5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 2 | h7 | 2 ～ 10 | 2 ～ 6 | 2.5 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 3 | h7 | 2 ～ 10 | 3 ～ 6 | 3.5 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 4 | h7 | 2 ～ 10 | 4 ～ 8 | 4.5 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 5 | h7 | 2 ～ 10 | 5 ～ 10 | 5.5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 6 | h7 | 2 ～ 12 | 6 ～ 12 | 6.5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 8 | h7 | 2 ～ 15 | 8 ～ 16 | 9 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 10 | h7 | 2 ～ 20 | 10 ～ 20 | 11 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 12 | h7 | 2 ～ 30 | 12 ～ 24 | 13 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 13 | h7 | 2 ～ 30 | 13 ～ 26 | 14 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 16 | h7 | 5 ～ 35 | 16 ～ 32 | 17 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 20 | h7 | 5 ～ 40 | 20 ～ 40 | 22 ～ 30 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 1 | h7 | 2 ～ 5 | 2 ～ 3 | 1.5 ～ 2.5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 2 | h7 | 2 ～ 10 | 2 ～ 6 | 2.5 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 3 | h7 | 2 ～ 10 | 3 ～ 6 | 3.5 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 4 | h7 | 2 ～ 10 | 4 ～ 8 | 4.5 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 5 | h7 | 2 ～ 10 | 5 ～ 10 | 5.5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 6 | h7 | 2 ～ 12 | 6 ～ 12 | 6.5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 8 | h7 | 2 ～ 15 | 8 ～ 16 | 9 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 10 | h7 | 2 ～ 20 | 10 ～ 20 | 11 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 12 | h7 | 2 ～ 30 | 12 ～ 24 | 13 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 13 | h7 | 2 ～ 30 | 13 ～ 26 | 14 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 16 | h7 | 5 ～ 35 | 16 ～ 32 | 17 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 20 | h7 | 5 ～ 40 | 20 ～ 40 | 22 ～ 30 | ||
- | 1 Piece(s) | 5 Day(s) or more | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 1 | h7 | 2 ～ 5 | 2 ～ 3 | 1.5 ～ 2.5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 2 | h7 | 2 ～ 10 | 2 ～ 6 | 2.5 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 3 | h7 | 2 ～ 10 | 3 ～ 6 | 3.5 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 4 | h7 | 2 ～ 10 | 4 ～ 8 | 4.5 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 5 | h7 | 2 ～ 10 | 5 ～ 10 | 5.5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 6 | h7 | 2 ～ 12 | 6 ～ 12 | 6.5 ～ 10 |
Loading...
Basic Information
| Basic Shape | Large Head | Insertion Guide Tip Shape | Round | Insertion Guide Tip Type | Flat |
|---|---|---|---|---|---|
| Insertion Guide Specifications | Not Provided | Mounting Side Shape | Straight (Press-Fit) |
Specification/Dimensions
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Steel
-
Locating Side O.D. Tolerance
-
Mounting Side Outer Dia. D(mm)
-
Mounting Side Tolerance
-
B
-
L
-
Locating Side Outer Dia. P (Ø)
-
type
- BKFFA□□
- CKFFA□□
- GKFFA□□
- KFFA□□
- SKFFA□□
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Locating Pins - Pilot
- Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Tapped)
- Height Adjusting Pins - Press Fit
- Locating Pins - Large/Small Head, Tapered (Set Screw-Circumference Groove Shape)
- [Clean & Pack] Locating Pin - Tip Shape Selectable, Threaded
- [Clean & Pack] Small Diameter Locating Pin - Straight
- Locating Pins Large Head, Spherical, Threaded
- Flex Locater (Taper Pin) CP720
Complementary Products
-
Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded
MISUMI Days to Ship : 6 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
-
-
Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Press Fit)MISUMI
Days to Ship : 6 Day(s) or more
-
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press FitMISUMI
Days to Ship : 3 Day(s) or more
-
Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit)MISUMI
Days to Ship : 3 Day(s) or more
-
-
-
-
Locating Pins - High Hardness Stainless Steel, Large Flat Head (Press Fit)MISUMI
Days to Ship : 6 Day(s) or more
-
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy