(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit (Part Numbers)
- Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit from MISUMI.
- Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.
- When the P dimension is small, a centering hole will cause the sphere section to become small.
(i)Caution
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Configured Part Number is shown.
● Press Fit
(Round) (Diamond) [ ! ]When D=P
(1) Round Shape has no relief.
(i) When D=P and tolerances are different
(ii) When D=P and tolerances are the same
(L+B) is general tolerance. (2) Diamond Shape has a relief. When D<3
a＝0.5
d＝D－0.1 When D≥3
a＝1.0
d＝D－0.2 [ ! ]Relief dimension is a reference value.
(1) Round Shape has no relief.
(i) When D=P and tolerances are different
(ii) When D=P and tolerances are the same
(L+B) is general tolerance. (2) Diamond Shape has a relief. When D<3
a＝0.5
d＝D－0.1 When D≥3
a＝1.0
d＝D－0.2 [ ! ]Relief dimension is a reference value.
[ ! ]Straight Sphere Type for which D=P is standardized is also available.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
| Round | Diamond | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | KFQA | KFQD |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC / Plating Hardness: 750HV ~ | GKFQA | GKFQD |
| (3) | SUS304 | - | - | SKFQA | SKFQD |
| (4) | SUS304 | Hard Chrome Plating | Plating Hardness: 750HV ~ | HKFQA | HKFQD |
| (5) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | CKFQA | CKFQD |
| (7) | SKS3 Equivalent | Buffing | Treated Hardness: 60~63HRC | MKFQA | MKFQD |
| (8) | SKS3 Equivalent | Hard Chrome Plating + Buffing | Treated Hardness: 50~55HRC / Plating Hardness: 750HV ~ | MGKFQA | MGKFQD |
Specifications
| Part Number | - | P | - | L | - | B | ||||||||
| Type | Shape | D Tol. | P Tol. | D | ||||||||||
| KFQ | A | M | S | 6 | - | P8.00 | - | L8 | - | B6.0 | ||||
■Tolerance Selection
| D or P | Standard Grade | Precision Grade | |||||
| M | P | G | H | S | A | B | |
| m6 | p6 | g6 | h7 | - | - | - | |
| 1.00 ~ 3.00 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 0 -0.010 | 0 -0.01 | +0.005 0 | 0 -0.005 |
| 3.01 ~ 6.00 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 | |||
| 6.01 ~ 10.00 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 | |||
| 10.01 ~ 18.00 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 | 0 -0.018 | |||
| 18.01 ~ 30.00 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 | 0 -0.021 | |||
[ NG ]Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]When the P dimension is small, a centering hole will cause the sphere section to become small.
[ ! ]The spherical head may be polished.
■Press Fit
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | (W) | |||||
| Type | Shape | D Tolerance Selection | P Tolerance Selection | D | ||||||
| KFQ GKFQ* SKFQ HKFQ* CKFQ | (Buff Finished) MKFQ* MGKFQ* [ ! ]Applicable to D≥5 | A (Round) D (Diamond) | M P G H *A *B | S M P G H *A *B | 1 | 1.00~3.00(2.50) | 2, 3 | 2.0~5.0 | 0.1 | - |
| 2 | 2.00~6.00(4.00) | 2~6 | 2.0~15.0(10.0) | 0.5 | 1.2 | |||||
| 3 | 3.00~8.00 | 3~10 | 2.0~15.0(10.0) | 0.5 | 1.5 | |||||
| 4 | 4.00~8.00 | 3(4)~14 | 2.0~15.0(10.0) | 1 | 1.8 | |||||
| 5 | 5.00~10.00 | 5~15 | 2.0~15.0(10.0) | 1 | 2.2 | |||||
| 6 | 6.00~10.00 | 5~15 | 2.0~30.0(15.0) | 1 | 3.0 | |||||
| 8 | 8.50~15.00 | 5(6)~16 | 2.0~30.0(15.0) | 1.5 | 3.5 | |||||
| 10 | 10.00~17.00 | 5(10)~20 | 3.0~30.0(25.0) | 2 | 4.0 | |||||
| 12 | 12.00~18.00 | 6(10)~24 | 3.0~30.0(25.0) | 2 | 5.0 | |||||
| 13 | 13.00~20.00 | 7(12)~26 | 5.0~30.0(25.0) | 2 | 5.5 | |||||
| 16 | 16.00~27.00 | 8(15)~32 | 5.0~30.0 | 3 | 7.0 | |||||
| 20 | 20.00~30.00 | 10(15)~40 | 5.0~30.0 | 3 | 9.0 | |||||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| CKFQDHS16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQDHS20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQDMA2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFQDMA3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFQDMA4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQDMA5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQDMA6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQDMA8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQDMA10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQDMA12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQDMA13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQDMA16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQDMA20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQDMB2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFQDMB3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFQDMB4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQDMB5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQDMB6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQDMB8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQDMB10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQDMB12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQDMB13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQDMB16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQDMB20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQDMG2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFQDMG3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFQDMG4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQDMG5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQDMG6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQDMG8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQDMG10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQDMG12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQDMG13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQDMG16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQDMG20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQDMH2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFQDMH3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFQDMH4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQDMH5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQDMH6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQDMH8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQDMH10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQDMH12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQDMH13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQDMH16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQDMH20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQDMM2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFQDMM3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFQDMM4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQDMM5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQDMM6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQDMM8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQDMM10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQDMM12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQDMM13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQDMM16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQDMM20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQDMP2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFQDMP3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFQDMP4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQDMP5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQDMP6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQDMP8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQDMP10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQDMP12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQDMP13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQDMP16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQDMP20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQDMS2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFQDMS3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFQDMS4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQDMS5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQDMS6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQDMS8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQDMS10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQDMS12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQDMS13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQDMS16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQDMS20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQDPA2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1] |
| CKFQDPA3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1] |
| CKFQDPA4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQDPA5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQDPA6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQDPA8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQDPA10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQDPA12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQDPA13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQDPA16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQDPA20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Insertion Guide Tip Shape | Surface Treatment | Heat Treatment | Material | Locating Side O.D. Tolerance | Mounting Side Outer Dia. D (mm) | Mounting Side Tolerance | B | L | Locating Side Outer Dia. P (Ø) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 16 | h7 | 5 ～ 20 | 16 ～ 32 | 16 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 20 | h7 | 5 ～ 20 | 20 ～ 40 | 20 ～ 30 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 2 | m6 | 2 ～ 10 | 2 ～ 6 | 2 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 3 | m6 | 2 ～ 10 | 3 ～ 6 | 3 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 4 | m6 | 2 ～ 10 | 4 ～ 8 | 4 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 5 | m6 | 2 ～ 10 | 5 ～ 10 | 5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 6 | m6 | 2 ～ 12 | 6 ～ 12 | 6 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 8 | m6 | 2 ～ 15 | 8 ～ 16 | 8 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 10 | m6 | 3 ～ 20 | 10 ～ 20 | 10 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 12 | m6 | 3 ～ 20 | 12 ～ 24 | 12 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 13 | m6 | 5 ～ 20 | 13 ～ 26 | 13 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 16 | m6 | 5 ～ 20 | 16 ～ 32 | 16 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 20 | m6 | 5 ～ 20 | 20 ～ 40 | 20 ～ 30 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 2 | m6 | 2 ～ 10 | 2 ～ 6 | 2 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 3 | m6 | 2 ～ 10 | 3 ～ 6 | 3 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 4 | m6 | 2 ～ 10 | 4 ～ 8 | 4 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 5 | m6 | 2 ～ 10 | 5 ～ 10 | 5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 6 | m6 | 2 ～ 12 | 6 ～ 12 | 6 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 8 | m6 | 2 ～ 15 | 8 ～ 16 | 8 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 10 | m6 | 3 ～ 20 | 10 ～ 20 | 10 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 12 | m6 | 3 ～ 20 | 12 ～ 24 | 12 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 13 | m6 | 5 ～ 20 | 13 ～ 26 | 13 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 16 | m6 | 5 ～ 20 | 16 ～ 32 | 16 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.005 | 20 | m6 | 5 ～ 20 | 20 ～ 40 | 20 ～ 30 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 2 | m6 | 2 ～ 10 | 2 ～ 6 | 2 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 3 | m6 | 2 ～ 10 | 3 ～ 6 | 3 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 4 | m6 | 2 ～ 10 | 4 ～ 8 | 4 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 5 | m6 | 2 ～ 10 | 5 ～ 10 | 5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 6 | m6 | 2 ～ 12 | 6 ～ 12 | 6 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 8 | m6 | 2 ～ 15 | 8 ～ 16 | 8 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 10 | m6 | 3 ～ 20 | 10 ～ 20 | 10 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 12 | m6 | 3 ～ 20 | 12 ～ 24 | 12 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 13 | m6 | 5 ～ 20 | 13 ～ 26 | 13 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 16 | m6 | 5 ～ 20 | 16 ～ 32 | 16 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | g6 | 20 | m6 | 5 ～ 20 | 20 ～ 40 | 20 ～ 30 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 2 | m6 | 2 ～ 10 | 2 ～ 6 | 2 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 3 | m6 | 2 ～ 10 | 3 ～ 6 | 3 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 4 | m6 | 2 ～ 10 | 4 ～ 8 | 4 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 5 | m6 | 2 ～ 10 | 5 ～ 10 | 5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 6 | m6 | 2 ～ 12 | 6 ～ 12 | 6 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 8 | m6 | 2 ～ 15 | 8 ～ 16 | 8 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 10 | m6 | 3 ～ 20 | 10 ～ 20 | 10 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 12 | m6 | 3 ～ 20 | 12 ～ 24 | 12 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 13 | m6 | 5 ～ 20 | 13 ～ 26 | 13 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 16 | m6 | 5 ～ 20 | 16 ～ 32 | 16 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | h7 | 20 | m6 | 5 ～ 20 | 20 ～ 40 | 20 ～ 30 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 2 | m6 | 2 ～ 10 | 2 ～ 6 | 2 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 3 | m6 | 2 ～ 10 | 3 ～ 6 | 3 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 4 | m6 | 2 ～ 10 | 4 ～ 8 | 4 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 5 | m6 | 2 ～ 10 | 5 ～ 10 | 5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 6 | m6 | 2 ～ 12 | 6 ～ 12 | 6 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 8 | m6 | 2 ～ 15 | 8 ～ 16 | 8 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 10 | m6 | 3 ～ 20 | 10 ～ 20 | 10 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 12 | m6 | 3 ～ 20 | 12 ～ 24 | 12 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 13 | m6 | 5 ～ 20 | 13 ～ 26 | 13 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 16 | m6 | 5 ～ 20 | 16 ～ 32 | 16 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | m6 | 20 | m6 | 5 ～ 20 | 20 ～ 40 | 20 ～ 30 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 2 | m6 | 2 ～ 10 | 2 ～ 6 | 2 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 3 | m6 | 2 ～ 10 | 3 ～ 6 | 3 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 4 | m6 | 2 ～ 10 | 4 ～ 8 | 4 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 5 | m6 | 2 ～ 10 | 5 ～ 10 | 5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 6 | m6 | 2 ～ 12 | 6 ～ 12 | 6 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 8 | m6 | 2 ～ 15 | 8 ～ 16 | 8 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 10 | m6 | 3 ～ 20 | 10 ～ 20 | 10 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 12 | m6 | 3 ～ 20 | 12 ～ 24 | 12 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 13 | m6 | 5 ～ 20 | 13 ～ 26 | 13 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 16 | m6 | 5 ～ 20 | 16 ～ 32 | 16 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | p6 | 20 | m6 | 5 ～ 20 | 20 ～ 40 | 20 ～ 30 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 2 | m6 | 2 ～ 10 | 2 ～ 6 | 2 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 3 | m6 | 2 ～ 10 | 3 ～ 6 | 3 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 4 | m6 | 2 ～ 10 | 4 ～ 8 | 4 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 5 | m6 | 2 ～ 10 | 5 ～ 10 | 5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 6 | m6 | 2 ～ 12 | 6 ～ 12 | 6 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 8 | m6 | 2 ～ 15 | 8 ～ 16 | 8 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 10 | m6 | 3 ～ 20 | 10 ～ 20 | 10 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 12 | m6 | 3 ～ 20 | 12 ～ 24 | 12 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 13 | m6 | 5 ～ 20 | 13 ～ 26 | 13 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 16 | m6 | 5 ～ 20 | 16 ～ 32 | 16 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0/-0.01 | 20 | m6 | 5 ～ 20 | 20 ～ 40 | 20 ～ 30 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 2 | p6 | 2 ～ 10 | 2 ～ 6 | 2 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 3 | p6 | 2 ～ 10 | 3 ～ 6 | 3 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 4 | p6 | 2 ～ 10 | 4 ～ 8 | 4 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 5 | p6 | 2 ～ 10 | 5 ～ 10 | 5 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 6 | p6 | 2 ～ 12 | 6 ～ 12 | 6 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 8 | p6 | 2 ～ 15 | 8 ～ 16 | 8 ～ 13 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 10 | p6 | 3 ～ 20 | 10 ～ 20 | 10 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 12 | p6 | 3 ～ 20 | 12 ～ 24 | 12 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 13 | p6 | 5 ～ 20 | 13 ～ 26 | 13 ～ 18 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 16 | p6 | 5 ～ 20 | 16 ～ 32 | 16 ～ 25 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 0.005/0 | 20 | p6 | 5 ～ 20 | 20 ～ 40 | 20 ～ 30 |
Loading...
Basic Information
| Basic Shape | Large Head | Insertion Guide Tip Type | Spherical | Insertion Guide Specifications | Not Provided |
|---|---|---|---|---|---|
| Mounting Side Shape | Straight (Press-Fit) |
Specification/Dimensions
-
Insertion Guide Tip Shape
-
Round -
Diamond
-
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Buffed
- Hard Chrome Plating + Buffed
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Steel
-
Locating Side O.D. Tolerance
-
Mounting Side Outer Dia. D(mm)
-
Mounting Side Tolerance
-
B
-
L
-
Locating Side Outer Dia. P (Ø)(mm)
-
type
- CKFQAAA
- CKFQAAB
- CKFQAAG
- CKFQAAH
- CKFQAAM
- CKFQAAP
- CKFQAAS
- CKFQABA
- CKFQABB
- CKFQABG
- CKFQABH
- CKFQABM
- CKFQABP
- CKFQABS
- CKFQAGA
- CKFQAGB
- CKFQAGG
- CKFQAGH
- CKFQAGM
- CKFQAGP
- CKFQAGS
- CKFQAHA
- CKFQAHB
- CKFQAHG
- CKFQAHH
- CKFQAHM
- CKFQAHP
- CKFQAHS
- CKFQAMA
- CKFQAMB
- CKFQAMG
- CKFQAMH
- CKFQAMM
- CKFQAMP
- CKFQAMS
- CKFQAPA
- CKFQAPB
- CKFQAPG
- CKFQAPH
- CKFQAPM
- CKFQAPP
- CKFQAPS
- CKFQDAA
- CKFQDAB
- CKFQDAG
- CKFQDAH
- CKFQDAM
- CKFQDAP
- CKFQDAS
- CKFQDBA
- CKFQDBB
- CKFQDBG
- CKFQDBH
- CKFQDBM
- CKFQDBP
- CKFQDBS
- CKFQDGA
- CKFQDGB
- CKFQDGG
- CKFQDGH
- CKFQDGM
- CKFQDGP
- CKFQDGS
- CKFQDHA
- CKFQDHB
- CKFQDHG
- CKFQDHH
- CKFQDHM
- CKFQDHP
- CKFQDHS
- CKFQDMA
- CKFQDMB
- CKFQDMG
- CKFQDMH
- CKFQDMM
- CKFQDMP
- CKFQDMS
- CKFQDPA
- CKFQDPB
- CKFQDPG
- CKFQDPH
- CKFQDPM
- CKFQDPP
- CKFQDPS
- GKFQAGG
- GKFQAGH
- GKFQAGM
- GKFQAGP
- GKFQAGS
- GKFQAHG
- GKFQAHH
- GKFQAHM
- GKFQAHP
- GKFQAHS
- GKFQAMG
- GKFQAMH
- GKFQAMM
- GKFQAMP
- GKFQAMS
- GKFQAPG
- GKFQAPH
- GKFQAPM
- GKFQAPP
- GKFQAPS
- GKFQDGG
- GKFQDGH
- GKFQDGM
- GKFQDGP
- GKFQDGS
- GKFQDHG
- GKFQDHH
- GKFQDHM
- GKFQDHP
- GKFQDHS
- GKFQDMG
- GKFQDMH
- GKFQDMM
- GKFQDMP
- GKFQDMS
- GKFQDPG
- GKFQDPH
- GKFQDPM
- GKFQDPP
- GKFQDPS
- HKFQAGG
- HKFQAGH
- HKFQAGM
- HKFQAGP
- HKFQAGS
- HKFQAHG
- HKFQAHH
- HKFQAHM
- HKFQAHP
- HKFQAHS
- HKFQAMG
- HKFQAMH
- HKFQAMM
- HKFQAMP
- HKFQAMS
- HKFQAPG
- HKFQAPH
- HKFQAPM
- HKFQAPP
- HKFQAPS
- HKFQDGG
- HKFQDGH
- HKFQDGM
- HKFQDGP
- HKFQDGS
- HKFQDHG
- HKFQDHH
- HKFQDHM
- HKFQDHP
- HKFQDHS
- HKFQDMG
- HKFQDMH
- HKFQDMM
- HKFQDMP
- HKFQDMS
- HKFQDPG
- HKFQDPH
- HKFQDPM
- HKFQDPP
- HKFQDPS
- KFQAAA
- KFQAAB
- KFQAAG
- KFQAAH
- KFQAAM
- KFQAAP
- KFQAAS
- KFQABA
- KFQABB
- KFQABG
- KFQABH
- KFQABM
- KFQABP
- KFQABS
- KFQAGA
- KFQAGB
- KFQAGG
- KFQAGH
- KFQAGM
- KFQAGP
- KFQAGS
- KFQAHA
- KFQAHB
- KFQAHG
- KFQAHH
- KFQAHM
- KFQAHP
- KFQAHS
- KFQAMA
- KFQAMB
- KFQAMG
- KFQAMH
- KFQAMM
- KFQAMP
- KFQAMS
- KFQAPA
- KFQAPB
- KFQAPG
- KFQAPH
- KFQAPM
- KFQAPP
- KFQAPS
- KFQDAA
- KFQDAB
- KFQDAG
- KFQDAH
- KFQDAM
- KFQDAP
- KFQDAS
- KFQDBA
- KFQDBB
- KFQDBG
- KFQDBH
- KFQDBM
- KFQDBP
- KFQDBS
- KFQDGA
- KFQDGB
- KFQDGG
- KFQDGH
- KFQDGM
- KFQDGP
- KFQDGS
- KFQDHA
- KFQDHB
- KFQDHG
- KFQDHH
- KFQDHM
- KFQDHP
- KFQDHS
- KFQDMA
- KFQDMB
- KFQDMG
- KFQDMH
- KFQDMM
- KFQDMP
- KFQDMS
- KFQDPA
- KFQDPB
- KFQDPG
- KFQDPH
- KFQDPM
- KFQDPP
- KFQDPS
- MCKFQAGG
- MCKFQAGH
- MCKFQAGM
- MCKFQAGP
- MCKFQAGS
- MCKFQAHG
- MCKFQAHH
- MCKFQAHM
- MCKFQAHP
- MCKFQAHS
- MCKFQAMG
- MCKFQAMH
- MCKFQAMM
- MCKFQAMP
- MCKFQAMS
- MCKFQAPG
- MCKFQAPH
- MCKFQAPM
- MCKFQAPP
- MCKFQAPS
- MCKFQDGG
- MCKFQDGH
- MCKFQDGM
- MCKFQDGP
- MCKFQDGS
- MCKFQDHG
- MCKFQDHH
- MCKFQDHM
- MCKFQDHP
- MCKFQDHS
- MCKFQDMG
- MCKFQDMH
- MCKFQDMM
- MCKFQDMP
- MCKFQDMS
- MCKFQDPG
- MCKFQDPH
- MCKFQDPM
- MCKFQDPP
- MCKFQDPS
- MGKFQAGG
- MGKFQAGH
- MGKFQAGM
- MGKFQAGP
- MGKFQAGS
- MGKFQAHG
- MGKFQAHH
- MGKFQAHM
- MGKFQAHP
- MGKFQAHS
- MGKFQAMG
- MGKFQAMH
- MGKFQAMM
- MGKFQAMP
- MGKFQAMS
- MGKFQAPG
- MGKFQAPH
- MGKFQAPM
- MGKFQAPP
- MGKFQAPS
- MGKFQDGG
- MGKFQDGH
- MGKFQDGM
- MGKFQDGP
- MGKFQDGS
- MGKFQDHG
- MGKFQDHH
- MGKFQDHM
- MGKFQDHP
- MGKFQDHS
- MGKFQDMG
- MGKFQDMH
- MGKFQDMM
- MGKFQDMP
- MGKFQDMS
- MGKFQDPG
- MGKFQDPH
- MGKFQDPM
- MGKFQDPP
- MGKFQDPS
- MKFQAGG
- MKFQAGH
- MKFQAGM
- MKFQAGP
- MKFQAGS
- MKFQAHG
- MKFQAHH
- MKFQAHM
- MKFQAHP
- MKFQAHS
- MKFQAMG
- MKFQAMH
- MKFQAMM
- MKFQAMP
- MKFQAMS
- MKFQAPG
- MKFQAPH
- MKFQAPM
- MKFQAPP
- MKFQAPS
- MKFQDGG
- MKFQDGH
- MKFQDGM
- MKFQDGP
- MKFQDGS
- MKFQDHG
- MKFQDHH
- MKFQDHM
- MKFQDHP
- MKFQDHS
- MKFQDMG
- MKFQDMH
- MKFQDMM
- MKFQDMP
- MKFQDMS
- MKFQDPG
- MKFQDPH
- MKFQDPM
- MKFQDPP
- MKFQDPS
- SKFQAAA
- SKFQAAB
- SKFQAAG
- SKFQAAH
- SKFQAAM
- SKFQAAP
- SKFQAAS
- SKFQABA
- SKFQABB
- SKFQABG
- SKFQABH
- SKFQABM
- SKFQABP
- SKFQABS
- SKFQAGA
- SKFQAGB
- SKFQAGG
- SKFQAGH
- SKFQAGM
- SKFQAGP
- SKFQAGS
- SKFQAHA
- SKFQAHB
- SKFQAHG
- SKFQAHH
- SKFQAHM
- SKFQAHP
- SKFQAHS
- SKFQAMA
- SKFQAMB
- SKFQAMG
- SKFQAMH
- SKFQAMM
- SKFQAMP
- SKFQAMS
- SKFQAPA
- SKFQAPB
- SKFQAPG
- SKFQAPH
- SKFQAPM
- SKFQAPP
- SKFQAPS
- SKFQDAA
- SKFQDAB
- SKFQDAG
- SKFQDAH
- SKFQDAM
- SKFQDAP
- SKFQDAS
- SKFQDBA
- SKFQDBB
- SKFQDBG
- SKFQDBH
- SKFQDBM
- SKFQDBP
- SKFQDBS
- SKFQDGA
- SKFQDGB
- SKFQDGG
- SKFQDGH
- SKFQDGM
- SKFQDGP
- SKFQDGS
- SKFQDHA
- SKFQDHB
- SKFQDHG
- SKFQDHH
- SKFQDHM
- SKFQDHP
- SKFQDHS
- SKFQDMA
- SKFQDMB
- SKFQDMG
- SKFQDMH
- SKFQDMM
- SKFQDMP
- SKFQDMS
- SKFQDPA
- SKFQDPB
- SKFQDPG
- SKFQDPH
- SKFQDPM
- SKFQDPP
- SKFQDPS
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Locating Pins - High Hardness Stainless Steel, Large Flat Head (Threaded)
- Locating Pins - High Hardness Stainless Steel, Large Flat Head (Tapped)
- Locating Pins - Large Flat Head - Side Locating - Press Fit
- Locating Pins - Plastic, Large Head - Tapped
- Locating Pins - Shouldered (Set Screw-Circumference Groove)
- Locating Pins for Grippers - Stepped
- [Clean & Pack] Locating Pin - Large Head, Tapered, Press Fit
- Locating Pins Straight, Tapered, Standard, Tapped
Complementary Products
-
Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded
MISUMI Days to Ship : 6 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
-
-
-
-
-
-
-
-
Locating Pins - High Hardness Stainless Steel Sphere Large Head (Press Fit)MISUMI
Days to Ship : 6 Day(s) or more
-
Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit)MISUMI
Days to Ship : 3 Day(s) or more
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy