Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Locating Pins for Fixtures Height Adjusting Pins - Threaded

MISUMI

[Features]Positioning of workpiece in both vertical and horizontal directions is possible. Male thread type.

(i)Caution

A machining step may remain at the base of the P dimension when selecting the diamond shape.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

(Round)

(Diamond)

Height Adjusting Pins for Fixtures - Threaded: Related Image

[ ! ] For Diamond Shapes, a step will be produced at the base of the P dimension.
[ ! ] * For T 5.0 to 7.0, detent width is 3 mm. For T 7.1 to 20.0, detent width is 5 mm.
[ ! ] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, chamfer tolerances, threaded length and angle dimension tolerances are excluded.
[ ! ] No grinding relief at P dimension.

Tip Shape Selectable [ ! ] The center hole remains.
Shape A	Shape B
Tapered	Taper R
[ ! ] P - 2Etan (A/2) ≥ 0.73	[ ! ] e = P/2 ÷ tan (A/2) + R - (R ÷ sin (A/2))
Reference: sin 15° ≒ 0.259, sin 30° = 0.5, sin 45° ≒ 0.707, sin 60° ≒ 0.866 tan15° ≒ 0.267 tan30° ≒ 0.577 tan45° = 1 tan60° ≒ 1.732

Type		[M] Material	[H] Hardness
	Config.
HUPNA	Round	SCM435	Hardened 35 to 40HRC
HUPND	Diamond
THUPNA	Round	SCM415	Carburized 55HRC or more (Depth 0.7 to 0.8) Anti-carburizing on Threads
THUPND	Diamond

Specification Table

Part Number			—	P	—	B	—	L	—	T	—	H	—	A	—	E

Type	Tip Shape	D
HUPNA	A	10	—	P4.8	—	B10	—	L10	—	T20.0	—	H20	—	A60	—	E5

Part Number					P Ordering Code 0.1 mm Increments	B Ordering Code 1 mm Increments	L Selection							T Ordering Code 0.1 mm Increments	H Ordering Code 1 mm Increments	A Selection	E (Shape A) 1 mm Increments	ℓ	R	W
Type		Tip Shape	D_h7
Hardened (Round) HUPNA (Diamond) HUPND	Carburized (Round) THUPNA (Diamond) THUPND	A (Tapered) B (Taper R)	6	0 −0.012	3.0 to 7.0	2 to 50 (B ≤ P × 4)	5	8	10					5.0 to 20.0	9 to 20	30 60 90 120	1 to 15	6	1	1 to 2
					7.1 to 12.0										9 to 20			6	3	3
			8	0 −0.015	3.0 to 9.0		5	8	10	12	15				11 to 20			10	1.5	1 to 2
					9.1 to 16.0										11 to 20			10	4	3.5
			10		4.5 to 12.0		(5)	(8)	10	12	15				13 to 25			12	2	1 to 3
					12.1 to 20.0										13 to 25			12	4	4
			10T		4.5 to 12.0		(5)	(8)	10	12	15				13 to 25			18	2	1 to 3
					12.1 to 20.0										13 to 25			18	5	5
			12	0 −0.018	9.0 to 14.0			(8)	10	12	15	18			15 to 30			15	3	4
					14.1 to 25.0										15 to 30			15	6	6
			16		13.0 to 18.0				(10)	12	15	18	20		19 to 35			18	4	5
					18.1 to 32.0										19 to 35			18	8	8

[!] W Dimension D6, D8: When P > 5.0, W = 2 D10, D10T: When P < 5.0, W = 1, When P > 7.0, W = 3 [!] L dimension in () is applicable to Round Shape only [!] P + 2 ≤ H ≤ P × 5

* Not applicable when using locking materials or lock washers.

Alterations

Alterations Code	Alteration Details		Application Conditions	Ordering Example
KC	Flat Position	Changes the flat position to 90° from the standard position 0°.	[ ! ] Applicable to Diamond Shape Type only	HUPNDA10-P8.8-B10-L10-T20.0-H20-A60-E3-KC
KD	Flat Machining	Machining on one side. When T5.0 to 7.0: 3 mm When T7.1 to 20.0: 5 mm	[ ! ] Applicable to Round Shape Type only [ ! ] KD cannot be combined with SC	HUPNAA10-P8.8-B10-L10-T20.0-H20-A60-E3-KD
SC	Wrench Flats	Adds wrench flats. Ordering Code: SC10	SC = 1 mm Increments SC > D, SC > P SC ≤ H-2 [ ! ] Applicable to Round Shape Type only	HUPNAA10-P8.8-B10-L10-T20.0-H20-A60-E3-SC18
MC	Thread Dia.	Changes the thread diameter. Ordering Code: MC8	[ ! ] D/3 ≤ M < D, Mmin3 [ ! ] Relief at thread end is available [ ! ] Applicable to Threaded Type only	HUPNAA10-P8.8-B10-L10-T20.0-H20-A60-E3-MC8

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
HUPNAA6-P[3-12/0.1]-B[2-50/1]-L[5,8,10]-T[5-20/0.1]-H[9-20/1]-A[30,60,90,120]-E[1-15/1]
HUPNAA8-P[3-16/0.1]-B[5-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[11-20/1]-A[30,60,90,120]-E[1-10/1]
HUPNAA10-P[4.5-20/0.1]-B[2-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]-E[1-15/1]
HUPNAA10T-P[4.5-20/0.1]-B[2-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]-E[1-15/1]
HUPNAA12-P[9-25/0.1]-B[2-50/1]-L[8,10,12,15,18]-T[5-20/0.1]-H[15-30/1]-A[30,60,90,120]-E[1-15/1]
HUPNAA16-P[13-32/0.1]-B[2-50/1]-L[10,12,15,18,20]-T[5-20/0.1]-H[19-35/1]-A[30,60,90,120]-E[1-15/1]
HUPNAB6-P[3-12/0.1]-B[5-50/1]-L[5,8,10]-T[5-20/0.1]-H[9-20/1]-A[30,60,90,120]
HUPNAB8-P[3-16/0.1]-B[5-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[11-20/1]-A[30,60,90,120]
HUPNAB10-P[4.5-20/0.1]-B[5-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]
HUPNAB10T-P[4.5-20/0.1]-B[2-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]
HUPNAB12-P[9-25/0.1]-B[2-50/1]-L[8,10,12,15,18]-T[5-20/0.1]-H[15-30/1]-A[30,60,90,120]
HUPNAB16-P[13-32/0.1]-B[2-50/1]-L[10,12,15,18,20]-T[5-20/0.1]-H[19-35/1]-A[30,60,90,120]
HUPNDA6-P[3-12/0.1]-B[2-50/1]-L[5,8,10]-T[5-20/0.1]-H[9-20/1]-A[30,60,90,120]-E[1-15/1]
HUPNDA8-P[3-16/0.1]-B[2-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[11-20/1]-A[30,60,90,120]-E[1-15/1]
HUPNDA10-P[4.5-20/0.1]-B[2-50/1]-L[10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]-E[1-15/1]
HUPNDA10T-P[4.5-20/0.1]-B[2-50/1]-L[10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]-E[1-15/1]
HUPNDA12-P[9-25/0.1]-B[2-50/1]-L[10,12,15,18]-T[5-20/0.1]-H[15-30/1]-A[30,60,90,120]-E[1-15/1]
HUPNDA16-P[13-32/0.1]-B[2-50/1]-L[12,15,18,20]-T[5-20/0.1]-H[19-35/1]-A[30,60,90,120]-E[1-15/1]
HUPNDB6-P[3-12/0.1]-B[5-50/1]-L[5,8,10]-T[5-20/0.1]-H[9-20/1]-A[30,60,90,120]
HUPNDB8-P[3-16/0.1]-B[5-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[11-20/1]-A[30,60,90,120]
HUPNDB10-P[4.5-20/0.1]-B[5-50/1]-L[10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]
HUPNDB10T-P[4.5-20/0.1]-B[2-50/1]-L[10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]
HUPNDB12-P[9-25/0.1]-B[2-50/1]-L[10,12,15,18]-T[5-20/0.1]-H[15-30/1]-A[30,60,90,120]
HUPNDB16-P[13-32/0.1]-B[5-50/1]-L[12,15,18,20]-T[5-20/0.1]-H[19-35/1]-A[30,60,90,120]
THUPNAA6-P[3-12/0.1]-B[2-50/1]-L[5,8,10]-T[5-20/0.1]-H[9-20/1]-A[30,60,90,120]-E[1-15/1]
THUPNAA8-P[3-16/0.1]-B[2-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[11-20/1]-A[30,60,90,120]-E[1-15/1]
THUPNAA10-P[4.5-20/0.1]-B[2-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]-E[1-15/1]
THUPNAA10T-P[4.5-20/0.1]-B[2-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]-E[1-15/1]
THUPNAA12-P[9-25/0.1]-B[2-50/1]-L[8,10,12,15,18]-T[5-20/0.1]-H[15-30/1]-A[30,60,90,120]-E[1-15/1]
THUPNAA16-P[13-32/0.1]-B[2-50/1]-L[10,12,15,18,20]-T[5-20/0.1]-H[19-35/1]-A[30,60,90,120]-E[1-16/1]
THUPNAB6-P[3-12/0.1]-B[2-50/1]-L[5,8,10]-T[5-20/0.1]-H[9-20/1]-A[30,60,90,120]
THUPNAB8-P[3-16/0.1]-B[2-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[11-20/1]-A[30,60,90,120]
THUPNAB10-P[4.5-20/0.1]-B[2-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]
THUPNAB10T-P[4.5-20/0.1]-B[2-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]
THUPNAB12-P[9-25/0.1]-B[2-50/1]-L[8,10,12,15,18]-T[5-20/0.1]-H[15-30/1]-A[30,60,90,120]
THUPNAB16-P[13-32/0.1]-B[2-50/1]-L[10,12,15,18,20]-T[5-20/0.1]-H[19-35/1]-A[30,60,90,120]
THUPNDA6-P[3-12/0.1]-B[2-50/1]-L[5,8,10]-T[5-20/0.1]-H[9-20/1]-A[30,60,90,120]-E[1-15/1]
THUPNDA8-P[3-16/0.1]-B[5-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[11-20/1]-A[30,60,90,120]-E[1-15/1]
THUPNDA10-P[4.5-20/0.1]-B[2-50/1]-L[10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]-E[1-15/1]
THUPNDA10T-P[4.5-20/0.1]-B[2-50/1]-L[10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]-E[1-15/1]
THUPNDA12-P[9-25/0.1]-B[2-50/1]-L[10,12,15,18]-T[5-20/0.1]-H[15-30/1]-A[30,60,90,120]-E[1-15/1]
THUPNDA16-P[13-32/0.1]-B[2-50/1]-L[12,15,18,20]-T[5-20/0.1]-H[19-35/1]-A[30,60,90,120]-E[1-15/1]
THUPNDB6-P[3-12/0.1]-B[5-50/1]-L[5,8,10]-T[5-20/0.1]-H[9-20/1]-A[30,60,90,120]
THUPNDB8-P[3-16/0.1]-B[5-50/1]-L[5,8,10,12,15]-T[5-20/0.1]-H[11-20/1]-A[30,60,90,120]
THUPNDB10-P[4.5-20/0.1]-B[5-50/1]-L[10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]
THUPNDB10T-P[4.5-20/0.1]-B[2-50/1]-L[10,12,15]-T[5-20/0.1]-H[13-25/1]-A[30,60,90,120]
THUPNDB12-P[9-25/0.1]-B[5-50/1]-L[10,12,15,18]-T[5-20/0.1]-H[15-30/1]-A[30,60,90,120]
THUPNDB16-P[13-32/0.1]-B[2-50/1]-L[12,15,18,20]-T[5-20/0.1]-H[19-35/1]-A[30,60,90,120]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Insertion Guide Tip Type	Insertion Guide Tip Shape	Insertion Guide Outer Dia. P (Ø)	Mounting Side Outer Dia. D (Ø)	Material	Heat Treatment	A	E (mm)	H (mm)	L (mm)	Positioning Part Length B (mm)	T (mm)
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Round	3 ～ 12	6	[Steel] SCM435	Directly Quenching	30	1 ～ 15	9 ～ 20	5 ～ 10	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Round	3 ～ 16	8	[Steel] SCM435	Directly Quenching	30 ～ 120	1 ～ 10	11 ～ 20	5 ～ 15	5 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Round	4.5 ～ 20	10	[Steel] SCM435	Directly Quenching	30	1 ～ 15	13 ～ 25	5 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Round	4.5 ～ 20	10T	[Steel] SCM435	Directly Quenching	30	1 ～ 15	13 ～ 25	5 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Round	9 ～ 25	12	[Steel] SCM435	Directly Quenching	30	1 ～ 15	15 ～ 30	8 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Round	13 ～ 32	16	[Steel] SCM435	Directly Quenching	30	1 ～ 15	19 ～ 35	10 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Round	3 ～ 12	6	[Steel] SCM435	Directly Quenching	30 ～ 120	-	9 ～ 20	5 ～ 10	5 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Round	3 ～ 16	8	[Steel] SCM435	Directly Quenching	30 ～ 120	-	11 ～ 20	5 ～ 15	5 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Round	4.5 ～ 20	10	[Steel] SCM435	Directly Quenching	30 ～ 120	-	13 ～ 25	5 ～ 15	5 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Round	4.5 ～ 20	10T	[Steel] SCM435	Directly Quenching	30	-	13 ～ 25	5 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Round	9 ～ 25	12	[Steel] SCM435	Directly Quenching	30	-	15 ～ 30	8 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Round	13 ～ 32	16	[Steel] SCM435	Directly Quenching	30	-	19 ～ 35	10 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Diamond	3 ～ 12	6	[Steel] SCM435	Directly Quenching	30	1 ～ 15	9 ～ 20	5 ～ 10	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Diamond	3 ～ 16	8	[Steel] SCM435	Directly Quenching	30	1 ～ 15	11 ～ 20	5 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Diamond	4.5 ～ 20	10	[Steel] SCM435	Directly Quenching	30	1 ～ 15	13 ～ 25	10 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Diamond	4.5 ～ 20	10T	[Steel] SCM435	Directly Quenching	30	1 ～ 15	13 ～ 25	10 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Diamond	9 ～ 25	12	[Steel] SCM435	Directly Quenching	30	1 ～ 15	15 ～ 30	10 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Diamond	13 ～ 32	16	[Steel] SCM435	Directly Quenching	30	1 ～ 15	19 ～ 35	12 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Diamond	3 ～ 12	6	[Steel] SCM435	Directly Quenching	30 ～ 120	-	9 ～ 20	5 ～ 10	5 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Diamond	3 ～ 16	8	[Steel] SCM435	Directly Quenching	30 ～ 120	-	11 ～ 20	5 ～ 15	5 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Diamond	4.5 ～ 20	10	[Steel] SCM435	Directly Quenching	30 ～ 120	-	13 ～ 25	10 ～ 15	5 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Diamond	4.5 ～ 20	10T	[Steel] SCM435	Directly Quenching	30	-	13 ～ 25	10 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Diamond	9 ～ 25	12	[Steel] SCM435	Directly Quenching	30	-	15 ～ 30	10 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Diamond	13 ～ 32	16	[Steel] SCM435	Directly Quenching	30 ～ 120	-	19 ～ 35	12 ～ 20	5 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Round	3 ～ 12	6	[Steel] SCM415	Carburized	30	1 ～ 15	9 ～ 20	5 ～ 10	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Round	3 ～ 16	8	[Steel] SCM415	Carburized	30	1 ～ 15	11 ～ 20	5 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Round	4.5 ～ 20	10	[Steel] SCM415	Carburized	30	1 ～ 15	13 ～ 25	5 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Round	4.5 ～ 20	10T	[Steel] SCM415	Carburized	30	1 ～ 15	13 ～ 25	5 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Round	9 ～ 25	12	[Steel] SCM415	Carburized	30	1 ～ 15	15 ～ 30	8 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Round	13 ～ 32	16	[Steel] SCM415	Carburized	30	1 ～ 16	19 ～ 35	10 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Round	3 ～ 12	6	[Steel] SCM415	Carburized	30	-	9 ～ 20	5 ～ 10	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Round	3 ～ 16	8	[Steel] SCM415	Carburized	30	-	11 ～ 20	5 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Round	4.5 ～ 20	10	[Steel] SCM415	Carburized	30	-	13 ～ 25	5 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Round	4.5 ～ 20	10T	[Steel] SCM415	Carburized	30	-	13 ～ 25	5 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Round	9 ～ 25	12	[Steel] SCM415	Carburized	30	-	15 ～ 30	8 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Round	13 ～ 32	16	[Steel] SCM415	Carburized	30	-	19 ～ 35	10 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Diamond	3 ～ 12	6	[Steel] SCM415	Carburized	30	1 ～ 15	9 ～ 20	5 ～ 10	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Diamond	3 ～ 16	8	[Steel] SCM415	Carburized	30 ～ 120	1 ～ 15	11 ～ 20	5 ～ 15	5 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Diamond	4.5 ～ 20	10	[Steel] SCM415	Carburized	30	1 ～ 15	13 ～ 25	10 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Diamond	4.5 ～ 20	10T	[Steel] SCM415	Carburized	30	1 ～ 15	13 ～ 25	10 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Diamond	9 ～ 25	12	[Steel] SCM415	Carburized	30	1 ～ 15	15 ～ 30	10 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tapered (Shape A)	Diamond	13 ～ 32	16	[Steel] SCM415	Carburized	30	1 ～ 15	19 ～ 35	12 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Diamond	3 ～ 12	6	[Steel] SCM415	Carburized	30 ～ 120	-	9 ～ 20	5 ～ 10	5 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Diamond	3 ～ 16	8	[Steel] SCM415	Carburized	30 ～ 120	-	11 ～ 20	5 ～ 15	5 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Diamond	4.5 ～ 20	10	[Steel] SCM415	Carburized	30 ～ 120	-	13 ～ 25	10 ～ 15	5 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Diamond	4.5 ～ 20	10T	[Steel] SCM415	Carburized	30	-	13 ～ 25	10 ～ 15	2 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Diamond	9 ～ 25	12	[Steel] SCM415	Carburized	30 ～ 120	-	15 ～ 30	10 ～ 18	5 ～ 50	5 ～ 20
-	1 Piece(s)	9 Day(s) or more	10	Tip R (Shape B)	Diamond	13 ～ 32	16	[Steel] SCM415	Carburized	30	-	19 ～ 35	12 ～ 15	2 ～ 50	5 ～ 20

App. Example

Locating of workpiece in both vertical and horizontal directions is possible.

Product TOP

Basic Information

Basic Shape	Height Adjusting Pin	Mounting Side Shape	Threaded	Insertion Guide Tolerance	Standard Grade 0/-0.05
Concentricity	Standard Grade Ø0.03	Surface Treatment	Not Provided

Configure

48 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Insertion Guide Tip Type
- Tapered (Shape A)
- Tip R (Shape B)
Clear
Insertion Guide Tip Shape
- Round
- Diamond
Clear
Insertion Guide Outer Dia. P(Ø)
[3-32/0.1Ø Unit(s)]
Clear
Mounting Side Outer Dia. D(Ø)
6

8

10

10T

12

16
Clear
Material
- Steel
  - SCM415
  - SCM435
Clear
Heat Treatment
- Directly Quenching
- Carburized
Clear
A
30

60

90

120
Clear
E(mm)
[1-16/1mm Unit(s)]
Clear
H(mm)
[9-35/1mm Unit(s)]
Clear
L(mm)
5

8

10

12

15

18

20
Clear
Positioning Part Length B(mm)
[2-50/1mm Unit(s)]
Clear
T(mm)
[5-20/0.1mm Unit(s)]
Clear
type
- HUPNAA
- HUPNAB
- HUPNDA
- HUPNDB
- THUPNAA
- THUPNAB
- THUPNDA
- THUPNDB
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

9 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 949.56- Days to Ship : 6 Day(s) or more
Angles - Resin
MISUMI Days to Ship : -
Bushings for Locating Pins - Copper Alloy, Flanged
MISUMI Days to Ship : 8 Day(s) or more
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Locating Pins for Fixtures - Tip Shape Selectable, Standard Grade, Shouldered - Threaded
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures - Standard Grade, No Shoulder - Threaded
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures - Tip Shape Selectable, Standard Grade, No Shoulder - Threaded
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures Height Adjusting Pins - Set Screw
MISUMI

Days to Ship : 9 Day(s) or more
Detection Pins for Weld Nut - Sensor Embedded
MISUMI

Days to Ship : 9 Day(s) or more
Locating Pins for Fixtures - Standard Grade, Shouldered - Set Screw
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures - Standard grade h7, Short Set Screw, Tip Shape Selectable (Circumference Groove)
MISUMI

Days to Ship : 7 Day(s) or more
Locating Pins for Fixtures - Standard h6 (Shoulder-Bolt Fixing)
MISUMI

Days to Ship : 7 Day(s) or more
Locating Pins for Fixtures - Square Head Locating Pins - Tip Shape Selectable - Shouldered / No Shoulder - Threaded
MISUMI

Days to Ship : 8 Day(s) or more
Locating Pins for Fixtures - Oval, Precision/Standard Grade - Shouldered / No Shoulder - Threaded
MISUMI

Days to Ship : 8 Day(s) or more
Locating Pins for Fixtures - Standard grade h7, Short Set Screw, Tip Shape Selectable (Notched)
MISUMI

Days to Ship : 7 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Locating Pins for Fixtures Height Adjusting Pins - Threaded

(i)Caution

Specification Table

Alterations

Part Number

App. Example

Basic Information

Configure

Specification/Dimensions

Insertion Guide Tip Type

Insertion Guide Tip Shape

Insertion Guide Outer Dia. P(Ø)

Mounting Side Outer Dia. D(Ø)

Material

Heat Treatment

A

E(mm)

H(mm)

L(mm)

Positioning Part Length B(mm)

T(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm