(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded)
- Volume Discount
- Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded) from MISUMI.
- The tip shape and the fixed shape of the Shouldered type are selectable from three types respectively.
- The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS304 may not be polished and may have no centering hole.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- A machining step remains on the shoulder top for Diamond shape.
Part Number
Configured Part Number is shown.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| LPDMBA3 |
| LPDMBA4 |
| LPDMBA5 |
| LPDMBA6 |
| LPDMBA8 |
| LPDMBA10 |
| LPDMBA12 |
| LPDMBA16 |
| LPDMBA20 |
| LPDMBB3 |
| LPDMBB4 |
| LPDMBB5 |
| LPDMBB6 |
| LPDMBB8-P[6-11/0.01]-B[2-15/0.1]-G[1-11/1]-L[14-16/1]-T[1-10/0.5] |
| LPDMBB10 |
| LPDMBB12 |
| LPDMBB16 |
| LPDMBB20 |
| LPDMBC3 |
| LPDMBC4 |
| LPDMBC5 |
| LPDMBC6 |
| LPDMBC8 |
| LPDMBC10 |
| LPDMBC12 |
| LPDMBC16 |
| LPDMBC20 |
| LPDMCA3-P[3.5-6/0.01]-B[2-10/0.1]-R[2-500/1]-L[3-6/1]-T[1-10/0.5] |
| LPDMCA4-P[3.5-7/0.01]-B[2-10/0.1]-R[2-500/1]-L[4-8/1]-T[1-10/0.5] |
| LPDMCA5-P[4-8/0.01]-B[2-10/0.1]-R[2-500/1]-L[5-10/1]-T[1-10/0.5] |
| LPDMCA6-P[5-10/0.01]-B[2-12/0.1]-R[3-500/1]-L[10-12/1]-T[1-10/0.5] |
| LPDMCA8-P[6-11/0.01]-B[2-15/0.1]-R[3-500/1]-L[14-16/1]-T[1-10/0.5] |
| LPDMCA10-P[8-13/0.01]-B[3-20/0.1]-R[4-500/1]-L[14-20/1]-T[1-10/0.5] |
| LPDMCA12-P[10-15/0.01]-B[3-20/0.1]-R[5-500/1]-L[14-24/1]-T[1-10/0.5] |
| LPDMCA16-P[13-18/0.01]-B[5-20/0.1]-R[7-500/1]-L[16-32/1]-T[1-10/0.5] |
| LPDMCA20-P[16-22/0.01]-B[5-20/0.1]-R[8-500/1]-L[20-40/1]-T[1-10/0.5] |
| LPDMCB3-P[3.5-6/0.01]-B[2-10/0.1]-G[1-6/1]-L[3-6/1]-T[1-10/0.5] |
| LPDMCB4-P[3.5-7/0.01]-B[2-10/0.1]-G[1-7/1]-L[4-8/1]-T[1-10/0.5] |
| LPDMCB5-P[4-8/0.01]-B[2-10/0.1]-G[1-8/1]-L[5-10/1]-T[1-10/0.5] |
| LPDMCB6-P[5-10/0.01]-B[2-12/0.1]-G[1-10/1]-L[10-12/1]-T[1-10/0.5] |
| LPDMCB8-P[6-11/0.01]-B[2-15/0.1]-G[1-11/1]-L[14-16/1]-T[1-10/0.5] |
| LPDMCB10-P[8-13/0.01]-B[3-20/0.1]-G[1-13/1]-L[14-20/1]-T[1-10/0.5] |
| LPDMCB12-P[10-15/0.01]-B[3-20/0.1]-G[1-15/1]-L[14-24/1]-T[1-10/0.5] |
| LPDMCB16-P[13-18/0.01]-B[5-20/0.1]-G[1-18/1]-L[16-32/1]-T[1-10/0.5] |
| LPDMCB20-P[16-22/0.01]-B[5-20/0.1]-G[1-22/1]-L[20-40/1]-T[1-10/0.5] |
| LPDMCC3-P[3.5-6/0.01]-B[2-10/0.1]-R[1-3/1]-L[3-6/1]-T[1-10/0.5] |
| LPDMCC4-P[3.5-7/0.01]-B[2-10/0.1]-R[1-3/1]-L[4-8/1]-T[1-10/0.5] |
| LPDMCC5-P[4-8/0.01]-B[2-10/0.1]-R[1-4/1]-L[5-10/1]-T[1-10/0.5] |
| LPDMCC6-P[5-10/0.01]-B[2-12/0.1]-R[1-5/1]-L[10-12/1]-T[1-10/0.5] |
| LPDMCC8-P[6-11/0.01]-B[2-15/0.1]-R[1-5/1]-L[14-16/1]-T[1-10/0.5] |
| LPDMCC10-P[8-13/0.01]-B[3-20/0.1]-R[1-6/1]-L[14-20/1]-T[1-10/0.5] |
| LPDMCC12-P[10-15/0.01]-B[3-20/0.1]-R[1-7/1]-L[14-24/1]-T[1-10/0.5] |
| LPDMCC16-P[13-18/0.01]-B[5-20/0.1]-R[1-9/1]-L[16-32/1]-T[1-10/0.5] |
| LPDMCC20-P[16-22/0.01]-B[5-20/0.1]-R[1-11/1]-L[20-40/1]-T[1-10/0.5] |
| LPDMDA3-P[3.5-6/0.01]-B[2-10/0.1]-R[2-500/1]-L[3-6/1]-T[1-10/0.5] |
| LPDMDA4-P[3.5-7/0.01]-B[2-10/0.1]-R[2-500/1]-L[4-8/1]-T[1-10/0.5] |
| LPDMDA5-P[4-8/0.01]-B[2-10/0.1]-R[2-500/1]-L[5-10/1]-T[1-10/0.5] |
| LPDMDA6-P[5-10/0.01]-B[2-12/0.1]-R[3-500/1]-L[10-12/1]-T[1-10/0.5] |
| LPDMDA8-P[6-11/0.01]-B[2-15/0.1]-R[3-500/1]-L[14-16/1]-T[1-10/0.5] |
| LPDMDA10-P[8-13/0.01]-B[3-20/0.1]-R[4-500/1]-L[14-20/1]-T[1-10/0.5] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Insertion Guide Tip Shape | Insertion Guide Tip Type | Mounting Side Shape | Surface Treatment | Heat Treatment | Material | Locating Side Outer Dia. P (Ø) (mm) | Mounting Side Outer Dia. D (mm) | Mounting Side Tolerance | Mounting Section Length L (mm) | G (mm) | Positioning Part Length B (mm) | R (mm) | T (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 91.85 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 3 | m6 | - | - | - | - | - | |
MYR 100.64 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 4 | m6 | - | - | - | - | - | |
MYR 110.00 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 5 | m6 | - | - | - | - | - | |
MYR 119.36 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 6 | m6 | - | - | - | - | - | |
MYR 119.36 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 8 | m6 | - | - | - | - | - | |
MYR 123.75 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 10 | m6 | - | - | - | - | - | |
MYR 133.10 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 12 | m6 | - | - | - | - | - | |
MYR 160.60 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 16 | m6 | - | - | - | - | - | |
MYR 211.76 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 20 | m6 | - | - | - | - | - | |
MYR 91.85 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Tapered | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 3 | m6 | - | - | - | - | - | |
MYR 100.64 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Tapered | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 4 | m6 | - | - | - | - | - | |
MYR 110.00 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Tapered | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 5 | m6 | - | - | - | - | - | |
MYR 119.36 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Tapered | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 6 | m6 | - | - | - | - | - | |
- | 1 Piece(s) | 7 Day(s) or more | 10 | Diamond | Tapered | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | 6 ～ 11 | 8 | m6 | 14 ～ 16 | 1 ～ 11 | 2 ～ 15 | - | 1 ～ 10 | ||
MYR 123.75 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Tapered | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 10 | m6 | - | - | - | - | - | |
MYR 133.10 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Tapered | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 12 | m6 | - | - | - | - | - | |
MYR 160.60 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Tapered | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 16 | m6 | - | - | - | - | - | |
MYR 211.76 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Tapered | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 20 | m6 | - | - | - | - | - | |
MYR 91.85 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Taper R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 3 | m6 | - | - | - | - | - | |
MYR 100.64 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Taper R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 4 | m6 | - | - | - | - | - | |
MYR 110.00 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Taper R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 5 | m6 | - | - | - | - | - | |
MYR 119.36 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Taper R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 6 | m6 | - | - | - | - | - | |
MYR 119.36 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Taper R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 8 | m6 | - | - | - | - | - | |
MYR 123.75 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Taper R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 10 | m6 | - | - | - | - | - | |
MYR 133.10 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Taper R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 12 | m6 | - | - | - | - | - | |
MYR 160.60 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Taper R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 16 | m6 | - | - | - | - | - | |
MYR 211.76 | 1 Piece(s) | Available | 7 Day(s) or more | 10 | Diamond | Taper R | Straight (Press-Fit) | Black Oxide | Dip Quenching | [Steel] S45C Equivalent | - | 20 | m6 | - | - | - | - | - | |
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3.5 ～ 6 | 3 | m6 | 3 ～ 6 | - | 2 ～ 10 | 2 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3.5 ～ 7 | 4 | m6 | 4 ～ 8 | - | 2 ～ 10 | 2 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 4 ～ 8 | 5 | m6 | 5 ～ 10 | - | 2 ～ 10 | 2 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 10 | 6 | m6 | 10 ～ 12 | - | 2 ～ 12 | 3 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 11 | 8 | m6 | 14 ～ 16 | - | 2 ～ 15 | 3 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 8 ～ 13 | 10 | m6 | 14 ～ 20 | - | 3 ～ 20 | 4 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 15 | 12 | m6 | 14 ～ 24 | - | 3 ～ 20 | 5 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 18 | 16 | m6 | 16 ～ 32 | - | 5 ～ 20 | 7 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 16 ～ 22 | 20 | m6 | 20 ～ 40 | - | 5 ～ 20 | 8 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3.5 ～ 6 | 3 | m6 | 3 ～ 6 | 1 ～ 6 | 2 ～ 10 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3.5 ～ 7 | 4 | m6 | 4 ～ 8 | 1 ～ 7 | 2 ～ 10 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 4 ～ 8 | 5 | m6 | 5 ～ 10 | 1 ～ 8 | 2 ～ 10 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 10 | 6 | m6 | 10 ～ 12 | 1 ～ 10 | 2 ～ 12 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 11 | 8 | m6 | 14 ～ 16 | 1 ～ 11 | 2 ～ 15 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 8 ～ 13 | 10 | m6 | 14 ～ 20 | 1 ～ 13 | 3 ～ 20 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 15 | 12 | m6 | 14 ～ 24 | 1 ～ 15 | 3 ～ 20 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 18 | 16 | m6 | 16 ～ 32 | 1 ～ 18 | 5 ～ 20 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 16 ～ 22 | 20 | m6 | 20 ～ 40 | 1 ～ 22 | 5 ～ 20 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3.5 ～ 6 | 3 | m6 | 3 ～ 6 | - | 2 ～ 10 | 1 ～ 3 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3.5 ～ 7 | 4 | m6 | 4 ～ 8 | - | 2 ～ 10 | 1 ～ 3 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 4 ～ 8 | 5 | m6 | 5 ～ 10 | - | 2 ～ 10 | 1 ～ 4 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 10 | 6 | m6 | 10 ～ 12 | - | 2 ～ 12 | 1 ～ 5 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 11 | 8 | m6 | 14 ～ 16 | - | 2 ～ 15 | 1 ～ 5 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 8 ～ 13 | 10 | m6 | 14 ～ 20 | - | 3 ～ 20 | 1 ～ 6 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 15 | 12 | m6 | 14 ～ 24 | - | 3 ～ 20 | 1 ～ 7 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 18 | 16 | m6 | 16 ～ 32 | - | 5 ～ 20 | 1 ～ 9 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 16 ～ 22 | 20 | m6 | 20 ～ 40 | - | 5 ～ 20 | 1 ～ 11 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 3.5 ～ 6 | 3 | m6 | 3 ～ 6 | - | 2 ～ 10 | 2 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 3.5 ～ 7 | 4 | m6 | 4 ～ 8 | - | 2 ～ 10 | 2 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 4 ～ 8 | 5 | m6 | 5 ～ 10 | - | 2 ～ 10 | 2 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 5 ～ 10 | 6 | m6 | 10 ～ 12 | - | 2 ～ 12 | 3 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 6 ～ 11 | 8 | m6 | 14 ～ 16 | - | 2 ～ 15 | 3 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | R | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 8 ～ 13 | 10 | m6 | 14 ～ 20 | - | 3 ～ 20 | 4 ～ 500 | 1 ～ 10 |
Loading...
Basic Information
| Basic Shape | Shouldered | Environmentally friendly | RoHS Compliant (10 Substances) | Characteristics/Applications | Not Applicable |
|---|---|---|---|---|---|
| Insertion Guide Specifications | Not Provided | Locating Side O.D. Tolerance | 0/-0.01 |
Specification/Dimensions
-
Insertion Guide Tip Shape
-
Round -
Diamond
-
-
Insertion Guide Tip Type
-
Tapered -
Taper R -
R
-
-
Mounting Side Shape
-
Straight (Press-Fit) -
Tapped -
Threaded
-
-
Surface Treatment
- Not Provided
- Black Oxide
- Hard Chrome Plating
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Steel
-
Locating Side Outer Dia. P (Ø)(mm)
-
Mounting Side Outer Dia. D(mm)
-
Mounting Side Tolerance
-
Mounting Section Length L(mm)
-
G(mm)
-
Positioning Part Length B(mm)
-
R(mm)
-
T(mm)
-
type
- LPDMBA
- LPDMBB
- LPDMBC
- LPDMCA
- LPDMCB
- LPDMCC
- LPDMDA
- LPDMDB
- LPDMDC
- LPDMGA
- LPDMGB
- LPDMGC
- LPDMJA
- LPDMJB
- LPDMJC
- LPDMRA
- LPDMRB
- LPDMRC
- LPDMSA
- LPDMSB
- LPDMSC
- LPDMYA
- LPDMYB
- LPDMYC
- LPDUBA
- LPDUBB
- LPDUBC
- LPDUCA
- LPDUCB
- LPDUCC
- LPDUDA
- LPDUDB
- LPDUDC
- LPDUGA
- LPDUGB
- LPDUGC
- LPDUJA
- LPDUJB
- LPDUJC
- LPDURA
- LPDURB
- LPDURC
- LPDUSA
- LPDUSB
- LPDUSC
- LPDUYA
- LPDUYB
- LPDUYC
- LPDXBA
- LPDXBB
- LPDXBC
- LPDXCA
- LPDXCB
- LPDXCC
- LPDXDA
- LPDXDB
- LPDXDC
- LPDXGA
- LPDXGB
- LPDXGC
- LPDXJA
- LPDXJB
- LPDXJC
- LPDXRA
- LPDXRB
- LPDXRC
- LPDXSA
- LPDXSB
- LPDXSC
- LPDXYA
- LPDXYB
- LPDXYC
- LPMBA
- LPMBB
- LPMBC
- LPMCA
- LPMCB
- LPMCC
- LPMDA
- LPMDB
- LPMDC
- LPMGA
- LPMGB
- LPMGC
- LPMJA
- LPMJB
- LPMJC
- LPMRA
- LPMRB
- LPMRC
- LPMSA
- LPMSB
- LPMSC
- LPMYA
- LPMYB
- LPMYC
- LPUBA
- LPUBB
- LPUBC
- LPUCA
- LPUCB
- LPUCC
- LPUDA
- LPUDB
- LPUDC
- LPUGA
- LPUGB
- LPUGC
- LPUJA
- LPUJB
- LPUJC
- LPURA
- LPURB
- LPURC
- LPUSA
- LPUSB
- LPUSC
- LPUYA
- LPUYB
- LPUYC
- LPXBA
- LPXBB
- LPXBC
- LPXCA
- LPXCB
- LPXCC
- LPXDA
- LPXDB
- LPXDC
- LPXGA
- LPXGB
- LPXGC
- LPXJA
- LPXJB
- LPXJC
- LPXRA
- LPXRB
- LPXRC
- LPXSA
- LPXSB
- LPXSC
- LPXYA
- LPXYB
- LPXYC
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Locating Pins - Large Head, Tapered - Screw Mounted, Standard / Compact
- Locating Pins - Large Head Tapered (Plastic Tip - Press Fit)
- Locating Pins - Shouldered (Set Screw-Notch Shape)
- Locating Pins - Shouldered (Set Screw-Set Screw Flat)
- Locating Pin High Hardness Stainless Steel Straight Tip Shape Selection - Tapped -
- Locating Pins Large Head, Tapered, Screw Mounted, Standard/Compact
- Locating Pins Small Head, Tapered, Tapped
- Locating Pin Large Head, Selectable Tapered Angle, Selectable Tolerance, Threaded
Complementary Products
-
![[High Precision] X-Axis Cross Roller - Micrometer Head](//content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 949.56- Days to Ship : 6 Day(s) or more
-
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more
![[High Precision] X-Axis Cross Roller - Micrometer Head](http://content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
Customers Who Viewed This Item Also Viewed
-
-
-
-
-
-
Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped)MISUMI
Days to Ship : 3 Day(s) or more
-
-
-
Locating Pins - Tip Shape Selectable (Tip Length Configurable-Threaded)MISUMI
Days to Ship : 3 Day(s) or more
-
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy