Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Locating Pins - Sphere Large Head (Press Fit)

Volume Discount

- Locating Pins - Sphere Large Head (Press Fit) from MISUMI.
- The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Insertion guide tip shape can be selected 2 types, round, and diamond.

(i)Caution

The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change
Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

(Round)

(Diamond)

[ ! ]Buffed at part only.
(Except Diamond Cut Surface)
The boundary between Sphere part and B dimension is indistinct.

When D<3
a＝0.5
d＝D－0.1
[ ! ]Relief dimension is a reference value.

When D≥3
a＝1.0
d＝D－0.2

* The insertion guide is applicable to tolerance p6 only.
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]When the P dimension is small, a centering hole will cause the sphere section to become small.
[ ! ]The spherical head may be polished.
[ ! ]Locating Pins for Height Adjusting with shorter B fixed dimension is also available.

Material No.	[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	P Selectable		P, L, B Configurable
Material No.	[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Type	D Tolerance and Shape	Type	D Tolerance and Shape
(1)	SKS3 Equivalent	-	Treated Hardness: 60 ~ 63HRC	JPQ	< Round > B (m6) PB (p6)	FPQ	< Round > A (m6) PA (p6) < Diamond > D (m6) PD (p6)
(2)	SKS3 Equivalent	Hard Chrome Plating	Treated Hardness: 50 ~ 55HRC / Plating Hardness: 750HV ~	-		GFPQ
(3)	SUS304*	-	-	SJPQ		SFPQ
(4)	SUS304	Hard Chrome Plating	Plating Hardness: 750HV ~	-		HFPQ
(5)	SUS440C or 13Cr stainless	-	Treated Hardness: 50 ~ 55HRC	CJPQ		CFPQ
(6)	SKS3 Equivalent	Buffing	Treated Hardness: 60 ~ 63HRC	-		MFPQ
(7)	SKS3 Equivalent	Hard Chrome Plating + Buffing	Treated Hardness: 50 ~ 55HRC / Plating Hardness: 750HV ~	-		MGFPQ
(8)	SUS440C or 13Cr stainless	Buffing	Treated Hardness: 50 ~ 55HRC	-		MCFPQ

*For P Selectable Type, it is EN 1.4301 Equiv. equivalent.

Specifications

Part Number			-	P	-	L	-	B

Type	D Tol.	D
JPQ FPQ MFPQ	B A PA	4 4 12	- - -	5 P5.00 P15.98	- -	L5 L12	- -	B2.5 B5.5

■P Selectable

Part Number					P Selection												L	B	C	ℓ
Type	D Tolerance and Shape	D	D Tol.
Type	D Tolerance and Shape	D	m6	p6
JPQ SJPQ CJPQ	< Round > B (m6) PB (p6)	1	+0.008 +0.002	+0.012 +0.006	2												3	3	0.1	0
		2				3	4										4	3	0.5	0
		3					4	5	6								5	5	0.5	1
		4	+0.012 +0.004	+0.020 +0.012				5	6	7							5	6	1
		5							6	7	8						10	6
		6								7	8	9	10				10	8
		8	+0.015 +0.006	+0.024 +0.015								9	10	11	12		15	8	1.5
		10	+0.015 +0.006	+0.024 +0.015											12	13	15	10	2

■P, L, B Configurable

Part Number					P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	C	ℓ	(W)
Type	D Tolerance and Shape	D	D Tol.
Type	D Tolerance and Shape	D	m6	p6
FPQ GFPQ SFPQ HFPQ CFPQ (Buff Finished) MFPQ MGFPQ MCFPQ [ ! ]Applicable when D≥5.	< Round > A (m6) PA (p6) < Diamond > D (m6) PD (p6) [ ! ]Applicable when D≥2	1	+0.008 +0.002	+0.012 +0.006	1.50~3.00(2.50)	2, 3	1.5~5.0	0.1	0	-
		2			2.50~6.00(4.00)	2~6	1.5~15.0(10.0)	0.5	0	1.2
		3			3.50~8.00	3~10	1.5~15.0(10.0)	0.5	1	1.5
		4	+0.012 +0.004	+0.020 +0.012	4.50~8.00	3(4)~14	1.5~15.0(10.0)	1		1.8
		5			5.50~10.00	5~15	1.5~15.0(10.0)			2.2
		6			6.50~10.00	5~15	1.5~30.0(15.0)			3.0
		8	+0.015 +0.006	+0.024 +0.015	8.50~15.00	5(6)~16	1.5~30.0(15.0)	1.5		3.5
		10	+0.015 +0.006	+0.024 +0.015	11.00~17.00	5(10)~20	3.0~30.0(25.0)	2		4.0
		12	+0.018 +0.007	+0.029 +0.018	13.00~18.00	6(10)~24	3.0~30.0(25.0)			5.0
		13			14.00~20.00	7(12)~26	5.0~30.0(25.0)		2	5.5
		16			17.00~27.00	8(15)~32	5.0~30.0	3		7.0
		20	+0.021 +0.008	+0.035 +0.022	22.00~30.00	10(15)~40	5.0~30.0	3		9.0

[ ! ] P, L, B dimensions in ( ) are applicable to Diamond Shape.

Alterations

Locating Pins - Sphere Large Head (Press Fit):Related Image

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
CFPQA1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1]
CFPQA2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1]
CFPQA3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1]
CFPQA4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1]
CFPQA5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1]
CFPQA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
CFPQA8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
CFPQA10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1]
CFPQA12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1]
CFPQA13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1]
CFPQA16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1]
CFPQA20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1]
CFPQD2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1]
CFPQD3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1]
CFPQD4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1]
CFPQD5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1]
CFPQD6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
CFPQD8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
CFPQD10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1]
CFPQD12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1]
CFPQD13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1]
CFPQD16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1]
CFPQD20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1]
CFPQPA1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1]
CFPQPA2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1]
CFPQPA3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1]
CFPQPA4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1]
CFPQPA5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1]
CFPQPA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
CFPQPA8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
CFPQPA10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1]
CFPQPA12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1]
CFPQPA13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1]
CFPQPA16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1]
CFPQPA20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1]
CFPQPD2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1]
CFPQPD3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1]
CFPQPD4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1]
CFPQPD5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1]
CFPQPD6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
CFPQPD8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
CFPQPD10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1]
CFPQPD12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1]
CFPQPD13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1]
CFPQPD16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1]
CFPQPD20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1]
CJPQB1-2
CJPQB2-3
CJPQB2-4
CJPQB3-4
CJPQB3-5
CJPQB3-6
CJPQB4-5
CJPQB4-6
CJPQB4-7
CJPQB5-6
CJPQB5-7
CJPQB5-8
CJPQB6-7
CJPQB6-8

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Insertion Guide Tip Shape	Surface Treatment	Heat Treatment	Material	Locating Side Outer Dia. P (Ø) (mm)	Mounting Side Outer Dia. D (mm)	Mounting Side Tolerance	Mounting Section Length L (mm)	Positioning Part Length B (mm)	Dimension Configurable Type	Positioning Part Length B (mm)
-	1 Piece(s)		5 Day(s) or more	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	1.5 ～ 2.5	1	m6	2 ～ 3	-	P, L, B Configurable	2 ～ 5
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	2.5 ～ 4	2	m6	2 ～ 6	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	3.5 ～ 6	3	m6	3 ～ 6	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	4.5 ～ 7	4	m6	4 ～ 8	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	5.5 ～ 8	5	m6	5 ～ 10	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	6.5 ～ 10	6	m6	6 ～ 12	-	P, L, B Configurable	2 ～ 12
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	9 ～ 13	8	m6	8 ～ 16	-	P, L, B Configurable	2 ～ 15
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	11 ～ 15	10	m6	10 ～ 20	-	P, L, B Configurable	3 ～ 20
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	13 ～ 16	12	m6	12 ～ 24	-	P, L, B Configurable	3 ～ 20
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	14 ～ 18	13	m6	13 ～ 26	-	P, L, B Configurable	5 ～ 20
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	17 ～ 25	16	m6	16 ～ 32	-	P, L, B Configurable	5 ～ 20
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	22 ～ 30	20	m6	20 ～ 40	-	P, L, B Configurable	5 ～ 20
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	2.5 ～ 4	2	m6	2 ～ 6	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	3.5 ～ 6	3	m6	3 ～ 6	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	4.5 ～ 7	4	m6	4 ～ 8	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	5.5 ～ 8	5	m6	5 ～ 10	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	6.5 ～ 10	6	m6	6 ～ 12	-	P, L, B Configurable	2 ～ 12
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	9 ～ 13	8	m6	8 ～ 16	-	P, L, B Configurable	2 ～ 15
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	11 ～ 15	10	m6	10 ～ 20	-	P, L, B Configurable	3 ～ 20
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	13 ～ 16	12	m6	12 ～ 24	-	P, L, B Configurable	3 ～ 20
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	14 ～ 18	13	m6	13 ～ 26	-	P, L, B Configurable	5 ～ 20
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	17 ～ 25	16	m6	16 ～ 32	-	P, L, B Configurable	5 ～ 20
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	22 ～ 30	20	m6	20 ～ 40	-	P, L, B Configurable	5 ～ 20
-	1 Piece(s)		5 Day(s) or more	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	1.5 ～ 2.5	1	p6	2 ～ 3	-	P, L, B Configurable	2 ～ 5
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	2.5 ～ 4	2	p6	2 ～ 6	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	3.5 ～ 6	3	p6	3 ～ 6	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	4.5 ～ 7	4	p6	4 ～ 8	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	5.5 ～ 8	5	p6	5 ～ 10	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	6.5 ～ 10	6	p6	6 ～ 12	-	P, L, B Configurable	2 ～ 12
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	9 ～ 13	8	p6	8 ～ 16	-	P, L, B Configurable	2 ～ 15
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	11 ～ 15	10	p6	10 ～ 20	-	P, L, B Configurable	3 ～ 20
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	13 ～ 16	12	p6	12 ～ 24	-	P, L, B Configurable	3 ～ 20
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	14 ～ 18	13	p6	13 ～ 26	-	P, L, B Configurable	5 ～ 20
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	17 ～ 25	16	p6	16 ～ 32	-	P, L, B Configurable	5 ～ 20
-	1 Piece(s)		3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	22 ～ 30	20	p6	20 ～ 40	-	P, L, B Configurable	5 ～ 20
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	2.5 ～ 4	2	p6	2 ～ 6	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	3.5 ～ 6	3	p6	3 ～ 6	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	4.5 ～ 7	4	p6	4 ～ 8	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	5.5 ～ 8	5	p6	5 ～ 10	-	P, L, B Configurable	2 ～ 10
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	6.5 ～ 10	6	p6	6 ～ 12	-	P, L, B Configurable	2 ～ 12
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	9 ～ 13	8	p6	8 ～ 16	-	P, L, B Configurable	2 ～ 15
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	11 ～ 15	10	p6	10 ～ 20	-	P, L, B Configurable	3 ～ 20
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	13 ～ 16	12	p6	12 ～ 24	-	P, L, B Configurable	3 ～ 20
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	14 ～ 18	13	p6	13 ～ 26	-	P, L, B Configurable	5 ～ 20
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	17 ～ 25	16	p6	16 ～ 32	-	P, L, B Configurable	5 ～ 20
-	1 Piece(s)		3 Day(s)	10	Diamond	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	22 ～ 30	20	p6	20 ～ 40	-	P, L, B Configurable	5 ～ 20
MYR 77.59	1 Piece(s)	Available	4 Day(s) or more	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	2	1	m6	3	3	P Selectable	-
MYR 23.14	1 Piece(s)	Available	2 Day(s) or more	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	3	2	m6	4	3	P Selectable	-
MYR 23.14	1 Piece(s)	Available	3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	4	2	m6	4	3	P Selectable	-
MYR 32.54	1 Piece(s)	Available	3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	4	3	m6	5	5	P Selectable	-
MYR 25.35	1 Piece(s)	Available	3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	5	3	m6	5	5	P Selectable	-
MYR 25.35	1 Piece(s)	Available	3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	6	3	m6	5	5	P Selectable	-
MYR 27.55	1 Piece(s)	Available	3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	5	4	m6	5	6	P Selectable	-
MYR 27.55	1 Piece(s)	Available	3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	6	4	m6	5	6	P Selectable	-
MYR 27.55	1 Piece(s)	Available	3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	7	4	m6	5	6	P Selectable	-
MYR 29.76	1 Piece(s)	Available	3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	6	5	m6	10	6	P Selectable	-
MYR 29.76	1 Piece(s)	Available	3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	7	5	m6	10	6	P Selectable	-
MYR 38.53	1 Piece(s)	Available	3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	8	5	m6	10	6	P Selectable	-
MYR 31.96	1 Piece(s)	Available	3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	7	6	m6	10	8	P Selectable	-
MYR 31.96	1 Piece(s)	Available	3 Day(s)	10	Round	Not Provided	Dip Quenching	[Stainless Steel] SUS440C or Equivalent	8	6	m6	10	8	P Selectable	-

1
2
3
4
5
Next >>

Example

Product TOP

Basic Information

Basic Shape	Large Head	Environmentally friendly	RoHS Compliant (10 Substances)	Characteristics/Applications	Not Applicable
Insertion Guide Tip Type	Spherical	Insertion Guide Specifications	Not Provided	Mounting Side Shape	Straight (Press-Fit)
Locating Side O.D. Tolerance	0/-0.01

Configure

490 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Insertion Guide Tip Shape
- Round
- Diamond
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
  - Hard Chrome Plating
- Buffed
- Hard Chrome Plating + Buffed
Clear
Heat Treatment
- Not Provided
- Dip Quenching
Clear
Material
- Steel
  - SKS3 Equivalent
- Stainless Steel
  - SUS304
  - SUS304 Equivalent
  - SUS440C or Equivalent
Clear
Locating Side Outer Dia. P (Ø)(mm)
2

3

4

5

6

7

8

9

10

11

12

13
[1.5-30/0.01mm Unit(s)]
Clear
Mounting Side Outer Dia. D(mm)
1

2

3

4

5

6

8

10

12

13

16

20
Clear
Mounting Side Tolerance
p6

m6
Clear
Mounting Section Length L(mm)
3

4

5

10

15

22

30
[2-40/1mm Unit(s)]
Clear
Positioning Part Length B(mm)
3

5

6

8

10

15
Clear
Dimension Configurable Type
- P Configurable
- P Selectable
- P, L, B Configurable
Clear
Positioning Part Length B(mm)
[1.5-20/0.1mm Unit(s)]
Clear
type
- CFPQA
- CFPQD
- CFPQPA
- CFPQPD
- CJPQB
- CJPQPB
- FPQA
- FPQD
- FPQPA
- FPQPD
- GFPQA
- GFPQD
- GFPQPA
- GFPQPD
- HFPQA
- HFPQD
- HFPQPA
- HFPQPD
- JPQB
- JPQPB
- MCFPQA
- MCFPQD
- MCFPQPA
- MCFPQPD
- MFPQA
- MFPQD
- MFPQPA
- MFPQPD
- MGFPQA
- MGFPQD
- MGFPQPA
- MGFPQPD
- MGJPQA
- MGJPQD
- MGJPQPA
- MGJPQPD
- SFPQA
- SFPQD
- SFPQPA
- SFPQPD
- SJPQB
- SJPQPB
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

2 Day(s) or Less

3 Day(s) or Less

4 Day(s) or Less

5 Day(s) or Less

6 Day(s) or Less

7 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 949.56- Days to Ship : 6 Day(s) or more
Angles - Resin
MISUMI Days to Ship : -
Bushings for Locating Pins - Copper Alloy, Flanged
MISUMI Days to Ship : 8 Day(s) or more
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Locating Pins - Large Head, Tapered (Press Fit)
MISUMI

Days to Ship : 1 Day(s) or more
Locating Pins - Sphere Large Head (Tapped)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Tip Shape Selectable (Straight Tapped)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Tip Shape Selectable (Press Fit)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Large Flat Head (Press Fit)
MISUMI

Days to Ship : 1 Day(s) or more
Locating Pins - Small Head, Tapered (Press Fit)
MISUMI

Days to Ship : 1 Day(s) or more
Locating Pins - Sphere Large Head (Threaded)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Tip Shape Selectable (Threaded)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Large Head, Tapered (Tapped)
MISUMI

Days to Ship : 1 Day(s) or more
Locating Pins - Tip Shape Selectable (Full Threaded)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Sphere Small Head (Press Fit)
MISUMI

Days to Ship : 2 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Locating Pins - Sphere Large Head (Press Fit)

(i)Caution

Specifications

Alterations

Part Number

Example

Basic Information

Configure

Specification/Dimensions

Insertion Guide Tip Shape

Surface Treatment

Heat Treatment

Material

Locating Side Outer Dia. P (Ø)(mm)

Mounting Side Outer Dia. D(mm)

Mounting Side Tolerance

Mounting Section Length L(mm)

Positioning Part Length B(mm)

Dimension Configurable Type

Positioning Part Length B(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm