(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Locating Pins - Large Head, Tapered - Threaded, Hex Socket (Part Numbers)
Click this image to zoom it.
Move the mouse over the image to zoom
- Locating Pins - Large Head, Tapered - Threaded, Hex Socket from MISUMI.
- Hex Socket is attached to the tip of Large Head, Tapered, Threaded. It is easy to mount as you can stop the head rotation.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
Part Number
Configured Part Number is shown.
(Round)
(Diamond)
a = 1.0
d = D - 0.2
[ ! ] Relief dimensions are reference values.
[ ! ] SUS304 products may not be polished and have no centering hole.
[ ! ] For SUS440C or 13Cr stainless steel, an identification groove is provided at any position on D part, unless the L dimension is short.
[ ! ] When M < D, the incomplete threaded portion (Pitch × 2) is included in ML.
| Material No. | [M] Material | [S] Surface Treatment | [H] Hardness | P, L, B Configurable | P, L, B, ML Configurable | Shape Code |
| (1) | SKS3 Equivalent | — | Treated Hardness: 60 to 63 HRC | FPNS | FPNSL | A (Round) D (Diamond) |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treaded Hardness: 50 to 55 HRC Plating Hardness: 750 HV or more | GFPNS | GFPNSL | |
| (3) | SKS3 Equivalent | — | — | BFPNS | BFPNSL | |
| (4) | SUS304 | — | — | SFPNS | SFPNSL | |
| (5) | SUS304 | Hard Chrome Plating | Plating Hardness: 750 HV or more | HFPNS | HFPNSL | |
| (6) | SUS440C or 13Cr Stainless Steel | — | Treaded Hardness: 50 to 55 HRC | CFPNS | CFPNSL | |
| (7) | SUS316 | — | — | LFPNS | — |
Specification Table
| Part Number | — | P | — | L | — | B | — | ML | — | M | ||||
| Type | Config. | D | ||||||||||||
| FPNS | A | 10 | — | P12.00 | — | L5 | — | B5.0 | — | M8 | ||||
| GFPNS | D | 16 | — | P19.50 | — | L14 | — | B10.0 | — | M12 | ||||
| BFPNSL | D | 12 | — | P14.50 | — | L19 | — | B12.0 | — | ML20 | — | M10 | ||
■Tapped and Threaded Recommended Tightening Torque (Reference)
[!] The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
| M (Coarse) | Tightening Torque |
| N・cm | |
| M3 | 98 |
| M4 | 225 |
| M5 | 461 |
| M6 | 784 |
| M8 | 1911 |
| M10 | 3783 |
| M12 | 6605 |
| M16 | 16366 |
| M20 | 32928 |
■P, L, B Configurable
| Part Number | P 0.01 mm Increments | L 1 mm Increments | B 0.1 mm Increments | M (Coarse) | ML | m | (W) | S1 | S2 | E | ||||||
| Type | Config. | D | D Dimension Tolerance g6 | |||||||||||||
| FPNS GFPNS BFPNS SFPNS HFPNS CFPNS LFPNS | A (Round) D (Diamond) [ ! ] Applicable when D ≥ 6 | 3 | -0.002 -0.008 | 6.00 to 6.50 | 2 to 12 | 3.5 to 10.0 | 3 | Mx1.5 | 2 | — | 3 | — | 2 | |||
| 4 | -0.004 -0.012 | 6.50 to 7.00 | 2 to 12 | 2.5 to 10.0 | 3 | 4 | 3 | — | ||||||||
| 5 | 6.50 to 8.00 | 3 to 15 | 2.5 to 10.0 | 3 | 4 | 5 | — | |||||||||
| 6 | 6.50 (8.00)Up to 10.00 | 3 to 15 | 2.5 to 12.0 | 4 | 5 | 6 | 3 | 3 | ||||||||
| 8 | -0.005 -0.014 | 9.00 (10.00)Up to 13.00 | 5 to 15 | 3.0 to 15.0 | 4 | 5 | 6 | 8 | 4 | 3.5 | 4 | 4 | 2.5 | |||
| 10 | 11.00 (12.00)Up to 15.00 | 5 to 20 | 4.5 to 20.0 | 5 | 6 | 8 | 10 | 4 | 5 | 5 | 3 | |||||
| 12 | -0.006 -0.017 | 13.00 to 18.00 | 8 to 20 | 6.0 to 20.0 | 6 | 8 | 10 | 12 | 5 | 6 | 6 | 4 | ||||
| 16 | 17.00 to 25.00 | 8 to 20 | 8.0 to 20.0 | 8 | 10 | 12 | 16 | 5 | 7 | 8 | 8 | 5 | ||||
| 20 | -0.007 -0.020 | 22.00 to 30.00 | 10 to 20 | 8.0 to 20.0 | 10 | 12 | 16 | 20 | 9 | |||||||
[!] P dimension in () is applicable to Diamond Shape. [!] ML dimension is the specified M dimension × 1.5. [!] When M dimension is not specified, D = M.
■P, L, B, ML Configurable
| Part Number | P 0.01 mm Increments | L 1 mm Increments | B 0.1 mm Increments | ML | M (Coarse) | m | (W) | S1 | S2 | E | ||||||
| Type | Config. | D | D Dimension Tolerance g6 | |||||||||||||
| FPNSL GFPNSL BFPNSL SFPNSL HFPNSL CFPNSL | A (Round) D (Diamond) [ ! ] Applicable when D ≥ 6 | 3 | -0.002 -0.008 | 6.00 to 6.50 | 2 to 12 | 3.5 to 10.0 | 3 to 9 | 3 | 2 | — | 3 | — | 2 | |||
| 4 | -0.004 -0.012 | 6.50 to 7.00 | 2 to 12 | 2.5 to 10.0 | 4 to 12 | 3 | 4 | 3 | — | |||||||
| 5 | 6.50 to 8.00 | 3 to 15 | 2.5 to 10.0 | 5 to 15 | 3 | 4 | 5 | — | ||||||||
| 6 | 6.50 (8.00)Up to 10.00 | 3 to 15 | 2.5 to 12.0 | 6 to 18 | 4 | 5 | 6 | 3 | 3 | |||||||
| 8 | -0.005 -0.014 | 9.00 (10.00)Up to 13.00 | 5 to 15 | 3.0 to 15.0 | 8 to 24 | 4 | 5 | 6 | 8 | 4 | 3.5 | 4 | 4 | 2.5 | ||
| 10 | 11.00 (12.00)Up to 15.00 | 5 to 20 | 4.5 to 20.0 | 10 to 30 | 5 | 6 | 8 | 10 | 4 | 5 | 5 | 3 | ||||
| 12 | -0.006 -0.017 | 13.00 to 18.00 | 8 to 20 | 6.0 to 20.0 | 12 to 30 | 6 | 8 | 10 | 12 | 5 | 6 | 6 | 4 | |||
| 16 | 17.00 to 25.00 | 8 to 20 | 8.0 to 20.0 | 16 to 40 | 8 | 10 | 12 | 16 | 5 | 7 | 8 | 8 | 5 | |||
| 20 | -0.007 -0.020 | 22.00 to 30.00 | 10 to 20 | 8.0 to 20.0 | 20 to 40 | 10 | 12 | 16 | 20 | 9 | ||||||
[ ! ] P dimension in ( ) is applicable to Diamond Shape. [ ! ] When M dimension is not specified, D = M.
[ ! ] When M Dia. is specified, the ML dimension range is listed in the table below.
■ML Dimension Range when M Dia. is specified
| M (Coarse) | ML 1 mm Increments |
| 3 | 3 to 9 |
| 4 | 4 to 12 |
| 5 | 5 to 15 |
| 6 | 6 to 18 |
| 8 | 8 to 24 |
| 10 | 10 to 30 |
| 12 | 12 to 30 |
| 16 | 16 to 40 |
| 20 | 20 to 40 |
Alterations
| Alterations Code | Alteration Details | Application Conditions | Ordering Example |
| NNC | Adds Relief | [ ! ] Undercut length is approx. Pitch × 2 [NG] Not applicable to D = M | FPNSA8-P10.00-L10-B10.0-M6-NNC |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| BFPNSA3-P[6-6.5/0.01]-L[2-6/1]-B[3-10/0.1] |
| BFPNSA4-P[6.5-7/0.01]-L[2-8/1]-B[2-10/0.1] |
| BFPNSA5-P[6.5-8/0.01]-L[3-10/1]-B[2-10/0.1] |
| BFPNSA6-P[6.5-10/0.01]-L[3-10/1]-B[2-12/0.1] |
| BFPNSA8-P[9-13/0.01]-L[5-10/1]-B[3-15/0.1] |
| BFPNSA10-P[11-15/0.01]-L[5-15/1]-B[4-20/0.1] |
| BFPNSA12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1] |
| BFPNSA16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1] |
| BFPNSA20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1] |
| BFPNSD6-P[8-10/0.01]-L[3-10/1]-B[2-12/0.1] |
| BFPNSD8-P[10-13/0.01]-L[5-10/1]-B[3-15/0.1] |
| BFPNSD10-P[12-15/0.01]-L[5-15/1]-B[4-20/0.1] |
| BFPNSD12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1] |
| BFPNSD16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1] |
| BFPNSD20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1] |
| CFPNSA3-P[6-6.5/0.01]-L[2-6/1]-B[3-10/0.1] |
| CFPNSA4-P[6.5-7/0.01]-L[2-8/1]-B[2-10/0.1] |
| CFPNSA5-P[6.5-8/0.01]-L[3-10/1]-B[2-10/0.1] |
| CFPNSA6-P[6.5-10/0.01]-L[3-10/1]-B[2-12/0.1] |
| CFPNSA8-P[9-13/0.01]-L[5-15/1]-B[3-15/0.1] |
| CFPNSA10-P[11-15/0.01]-L[5-15/1]-B[4-20/0.1] |
| CFPNSA12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1] |
| CFPNSA16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1] |
| CFPNSA20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1] |
| CFPNSD6-P[8-10/0.01]-L[3-10/1]-B[2-12/0.1] |
| CFPNSD8-P[10-13/0.01]-L[5-10/1]-B[3-15/0.1] |
| CFPNSD10-P[12-15/0.01]-L[5-15/1]-B[4-20/0.1] |
| CFPNSD12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1] |
| CFPNSD16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1] |
| CFPNSD20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1] |
| FPNSA3-P[6-6.5/0.01]-L[2-6/1]-B[3-10/0.1] |
| FPNSA4-P[6.5-7/0.01]-L[2-8/1]-B[2-10/0.1] |
| FPNSA5-P[6.5-8/0.01]-L[3-10/1]-B[2-10/0.1] |
| FPNSA6-P[6.5-10/0.01]-L[3-10/1]-B[2-12/0.1] |
| FPNSA8-P[9-13/0.01]-L[5-15/1]-B[3-15/0.1] |
| FPNSA10-P[11-15/0.01]-L[5-15/1]-B[4-20/0.1] |
| FPNSA12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1] |
| FPNSA16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1] |
| FPNSA20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1] |
| FPNSD6-P[8-10/0.01]-L[3-10/1]-B[2-12/0.1] |
| FPNSD8-P[10-13/0.01]-L[5-15/1]-B[3-15/0.1] |
| FPNSD10-P[12-15/0.01]-L[5-15/1]-B[4-20/0.1] |
| FPNSD12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1] |
| FPNSD16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1]-M[8,10,12,16] |
| FPNSD20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1]-M[10,12,16,20] |
| GFPNSA3-P[6-6.5/0.01]-L[2-12/1]-B[3-10/0.1] |
| GFPNSA4-P[6.5-7/0.01]-L[2-8/1]-B[2-10/0.1] |
| GFPNSA5-P[6.5-8/0.01]-L[3-15/1]-B[2-10/0.1] |
| GFPNSA6-P[6.5-10/0.01]-L[3-15/1]-B[2.5-12/0.1] |
| GFPNSA8-P[9-13/0.01]-L[5-10/1]-B[3-15/0.1] |
| GFPNSA10-P[11-15/0.01]-L[5-15/1]-B[4-20/0.1] |
| GFPNSA12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1] |
| GFPNSA16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1] |
| GFPNSA20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1] |
| GFPNSD6-P[8-10/0.01]-L[3-10/1]-B[2-12/0.1] |
| GFPNSD8-P[10-13/0.01]-L[5-10/1]-B[3-15/0.1]-M[4,5,6,8] |
| GFPNSD10-P[12-15/0.01]-L[5-15/1]-B[4-20/0.1]-M[5,6,8,10] |
| GFPNSD12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1] |
| GFPNSD16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1]-M[8,10,12,16] |
| GFPNSD20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1]-M[10,12,16,20] |
| HFPNSA3-P[6-6.5/0.01]-L[2-6/1]-B[3-10/0.1] |
| HFPNSA4-P[6.5-7/0.01]-L[2-12/1]-B[2-10/0.1] |
| HFPNSA5-P[6.5-8/0.01]-L[3-10/1]-B[2-10/0.1] |
| HFPNSA6-P[6.5-10/0.01]-L[3-10/1]-B[2-10/0.1] |
| HFPNSA8-P[9-13/0.01]-L[5-10/1]-B[3-15/0.1] |
| HFPNSA10-P[11-15/0.01]-L[5-15/1]-B[4-20/0.1] |
| HFPNSA12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1] |
| HFPNSA16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1] |
| HFPNSA20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1] |
| HFPNSD6-P[8-10/0.01]-L[3-10/1]-B[2-12/0.1] |
| HFPNSD8-P[10-13/0.01]-L[5-10/1]-B[3-15/0.1] |
| HFPNSD10-P[12-15/0.01]-L[5-15/1]-B[4-20/0.1] |
| HFPNSD12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1] |
| HFPNSD16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1] |
| HFPNSD20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1] |
| SFPNSA3-P[6-6.5/0.01]-L[2-6/1]-B[3-10/0.1] |
| SFPNSA4-P[6.5-7/0.01]-L[2-8/1]-B[2-10/0.1] |
| SFPNSA5-P[6.5-8/0.01]-L[3-15/1]-B[2-10/0.1] |
| SFPNSA6-P[6.5-10/0.01]-L[3-15/1]-B[2-12/0.1] |
| SFPNSA8-P[9-13/0.01]-L[5-10/1]-B[3-15/0.1] |
| SFPNSA10-P[11-15/0.01]-L[5-15/1]-B[4-20/0.1] |
| SFPNSA12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1] |
| SFPNSA16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1] |
| SFPNSA20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1] |
| SFPNSD6-P[8-10/0.01]-L[3-10/1]-B[2-12/0.1] |
| SFPNSD8-P[10-13/0.01]-L[5-10/1]-B[3-15/0.1] |
| SFPNSD10-P[12-15/0.01]-L[5-15/1]-B[4-20/0.1] |
| SFPNSD12-P[13-18/0.01]-L[8-15/1]-B[6-20/0.1] |
| SFPNSD16-P[17-25/0.01]-L[8-20/1]-B[8-20/0.1] |
| SFPNSD20-P[22-30/0.01]-L[10-20/1]-B[8-20/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Insertion Guide Tip Shape | Material Details | Surface Treatment | Heat Treatment | Material | Locating Side Outer Dia. P (Ø) (mm) | Mounting Side Outer Dia. D (mm) | Mounting Section Length L (mm) | M (Coarse) (mm) | Positioning Part Length B (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 6 ～ 6.5 | 3 | 2 ～ 6 | - | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 6.5 ～ 7 | 4 | 2 ～ 8 | - | 2 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 6.5 ～ 8 | 5 | 3 ～ 10 | - | 2 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | 3 ～ 10 | - | 2 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS304 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | 5 ～ 10 | - | 3 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS304 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | 5 ～ 15 | - | 4 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS304 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 13 ～ 18 | 12 | 8 ～ 15 | - | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 17 ～ 25 | - | 8 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 22 ～ 30 | - | 10 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | SUS440C or 13Cr Stainless Steel | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 8 ～ 10 | 6 | 3 ～ 10 | - | 2 ～ 12 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | SUS440C or 13Cr Stainless Steel | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 10 ～ 13 | 8 | 5 ～ 10 | - | 3 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 12 ～ 15 | 10 | 5 ～ 15 | - | 4 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 13 ～ 18 | 12 | 8 ～ 15 | - | 6 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | SUS440C or 13Cr Stainless Steel | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 17 ～ 25 | - | 8 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 22 ～ 30 | - | 10 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 6 ～ 6.5 | 3 | 2 ～ 6 | - | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 6.5 ～ 7 | 4 | 2 ～ 8 | - | 2 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 6.5 ～ 8 | 5 | 3 ～ 10 | - | 2 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 6.5 ～ 10 | 6 | 3 ～ 10 | - | 2 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 9 ～ 13 | 8 | 5 ～ 15 | - | 3 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 11 ～ 15 | 10 | 5 ～ 15 | - | 4 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 13 ～ 18 | 12 | 8 ～ 15 | - | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 17 ～ 25 | - | 8 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 22 ～ 30 | - | 10 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 8 ～ 10 | 6 | 3 ～ 10 | - | 2 ～ 12 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | SUS304 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 10 ～ 13 | 8 | 5 ～ 10 | - | 3 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 12 ～ 15 | 10 | 5 ～ 15 | - | 4 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | SUS304 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 13 ～ 18 | 12 | 8 ～ 15 | - | 6 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 17 ～ 25 | - | 8 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | SUS304 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C Equivalent | 22 ～ 30 | - | 10 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS316 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 6 ～ 6.5 | 20 | 2 ～ 6 | - | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS304 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 7 | 4 | 2 ～ 8 | - | 2 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS316 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 8 | 6 | 3 ～ 10 | - | 2 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS304 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | 3 ～ 10 | - | 2 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS304 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | 5 ～ 15 | - | 3 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS316 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | 5 ～ 15 | - | 4 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS316 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 18 | 16 | 8 ～ 15 | - | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS316 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 12 | 8 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS316 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 8 | 10 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | SUS304 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 8 ～ 10 | 6 | 3 ～ 10 | - | 2 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | SUS304 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 10 ～ 13 | 8 | 5 ～ 15 | - | 3 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | SUS304 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 12 ～ 15 | 10 | 5 ～ 15 | - | 4 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | SUS304 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 18 | 12 | 8 ～ 15 | - | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | SUS304 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | - | 8 ～ 20 | 8 ～ 16 | 8 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | SUS304 | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | - | 10 ～ 20 | 10 ～ 20 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 6 ～ 6.5 | 3 | 2 ～ 12 | - | 3 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 7 | 4 | 2 ～ 8 | - | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 8 | 5 | 3 ～ 15 | - | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | 3 ～ 15 | - | 2.5 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | 5 ～ 10 | - | 3 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | 5 ～ 15 | - | 4 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 18 | 12 | 8 ～ 15 | - | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | - | 8 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | - | 10 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | SUS440C or 13Cr Stainless Steel | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 8 ～ 10 | 6 | 3 ～ 10 | - | 2 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | SUS440C or 13Cr Stainless Steel | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 10 ～ 13 | 8 | 5 ～ 10 | 4 ～ 8 | 3 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | SUS440C or 13Cr Stainless Steel | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 12 ～ 15 | 10 | 5 ～ 15 | 5 ～ 10 | 4 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | SUS440C or 13Cr Stainless Steel | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 18 | 12 | 8 ～ 15 | - | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | SUS440C or 13Cr Stainless Steel | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | - | 8 ～ 20 | 8 ～ 16 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | SUS440C or 13Cr Stainless Steel | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | - | 10 ～ 20 | 10 ～ 20 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS440C or 13Cr Stainless Steel | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 6 ～ 6.5 | 3 | 2 ～ 6 | - | 3 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 6.5 ～ 7 | 4 | 2 ～ 12 | - | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS440C or 13Cr Stainless Steel | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 6.5 ～ 8 | 5 | 3 ～ 10 | - | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 6.5 ～ 10 | 6 | 3 ～ 10 | - | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 9 ～ 13 | 8 | 5 ～ 10 | - | 3 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS440C or 13Cr Stainless Steel | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 11 ～ 15 | 10 | 5 ～ 15 | - | 4 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS440C or 13Cr Stainless Steel | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 13 ～ 18 | 12 | 8 ～ 15 | - | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS440C or 13Cr Stainless Steel | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 17 ～ 25 | - | 8 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS440C or 13Cr Stainless Steel | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 22 ～ 30 | - | 10 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 8 ～ 10 | 6 | 3 ～ 10 | - | 2 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 10 ～ 13 | 8 | 5 ～ 10 | - | 3 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 12 ～ 15 | 10 | 5 ～ 15 | - | 4 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 13 ～ 18 | 12 | 8 ～ 15 | - | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 17 ～ 25 | - | 8 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Stainless Steel] SUS304 | 22 ～ 30 | - | 10 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Stainless Steel] SUS304 | 6 ～ 6.5 | 3 | 2 ～ 6 | - | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Stainless Steel] SUS304 | 6.5 ～ 7 | 4 | 2 ～ 8 | - | 2 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS304 | Not Provided | Not Provided | [Stainless Steel] SUS304 | 6.5 ～ 8 | 10 | 3 ～ 15 | - | 2 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Stainless Steel] SUS304 | 6.5 ～ 10 | 6 | 3 ～ 15 | - | 2 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS304 | Not Provided | Not Provided | [Stainless Steel] SUS304 | 9 ～ 13 | 16 | 5 ～ 10 | - | 3 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS304 | Not Provided | Not Provided | [Stainless Steel] SUS304 | 11 ～ 15 | 5 | 5 ～ 15 | - | 4 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS304 | Not Provided | Not Provided | [Stainless Steel] SUS304 | 13 ～ 18 | 12 | 8 ～ 15 | - | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS304 | Not Provided | Not Provided | [Stainless Steel] SUS304 | 17 ～ 25 | 20 | 8 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | SUS304 | Not Provided | Not Provided | [Stainless Steel] SUS304 | 22 ～ 30 | 3 | 10 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Stainless Steel] SUS304 | 8 ～ 10 | 6 | 3 ～ 10 | - | 2 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Stainless Steel] SUS304 | 10 ～ 13 | 8 | 5 ～ 10 | - | 3 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Stainless Steel] SUS304 | 12 ～ 15 | 10 | 5 ～ 15 | - | 4 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Stainless Steel] SUS304 | 13 ～ 18 | 12 | 8 ～ 15 | - | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Stainless Steel] SUS304 | 17 ～ 25 | - | 8 ～ 20 | - | 8 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Diamond | SKS3 (Including equivalent materials) | Not Provided | Not Provided | [Stainless Steel] SUS304 | 22 ～ 30 | - | 10 ～ 20 | - | 8 ～ 20 |
Loading...
Basic Information
| Basic Shape | Large Head | Insertion Guide Tip Type | Tapered | Insertion Guide Specifications | Hex Socket |
|---|---|---|---|---|---|
| Mounting Side Shape | Threaded | Locating Side O.D. Tolerance | 0/-0.01 | Mounting Side Tolerance | g6 |
Specification/Dimensions
-
Insertion Guide Tip Shape
-
Round -
Diamond
-
-
Material Details
- SUS304
- SUS440C or 13Cr Stainless Steel
- SKS3 (Including equivalent materials)
- SUS316
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Steel
-
Locating Side Outer Dia. P (Ø)(mm)
-
Mounting Side Outer Dia. D(mm)
-
Mounting Section Length L(mm)
-
M (Coarse)(mm)
-
Positioning Part Length B(mm)
-
type
- BFPNSA
- BFPNSD
- CFPNSA
- CFPNSD
- FPNSA
- FPNSD
- GFPNSA
- GFPNSD
- HFPNSA
- HFPNSD
- SFPNSA
- SFPNSD
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Locating Pins - Sphere Large Head (Threaded)
- Locating Pins - Large Flat Head (Press Fit)
- Locating Pins - Shouldered (Tapered, Tapped)
- Detection Pins for Weld Nuts
- Height Adjusting Pins - Counterbored
- Locating Pins Small Head Round Tapered
- Locating Pin High Hardness Stainless Small Head Spherical - Tapped -
- Locating Pin High-Hardness Stainless Head Taper -Male Thread-
Complementary Products
-
![[High Precision] X-Axis Cross Roller - Micrometer Head](//content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 949.56- Days to Ship : 6 Day(s) or more
-
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more
![[High Precision] X-Axis Cross Roller - Micrometer Head](http://content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
Customers Who Viewed This Item Also Viewed
-
-
-
-
-
-
-
-
-
Locating Pins - Large Head, Tapered - Screw Mounted, Standard / CompactMISUMI
Days to Ship : 3 Day(s) or more
-
-
Locating Pins - Tip Shape Selectable (Tip Length Configurable-Threaded)MISUMI
Days to Ship : 3 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy