(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.
Pivot Pins - End Shape Combination Selectable (Part Numbers)
Shaft End Shapes are selectable.
Part Number
Configured Part Number is shown.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| GFCLDE-D[4-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16] |
| GFCLDF-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-MC[3,4,5,6,8,10,12,16] |
| GFCLDG-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| GFCLDH-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[2-125/0.1] |
| GFCLEA-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16] |
| GFCLEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1] |
| GFCLEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| GFCLEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1] |
| GFCLED-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5] |
| GFCLEE-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16] |
| GFCLEF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16] |
| GFCLEG-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| GFCLEH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1] |
| GFCLFA-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16] |
| GFCLFB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1] |
| GFCLFB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| GFCLFC-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1] |
| GFCLFD-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| GFCLFE-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16] |
| GFCLFF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16] |
| GFCLFG-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| GFCLFH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1] |
| GFCLGA-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1] |
| GFCLGB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| GFCLGB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| GFCLGC-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[2-50/0.1] |
| GFCLGD-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| GFCLGE-D[4-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,4,5,6,8,10,12,16] |
| GFCLGF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-MC[3,4,5,6,8,10,12,16] |
| GFCLGG-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| GFCLGH-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[2-125/0.1] |
| GFCLHA-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1] |
| GFCLHB-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| GFCLHB-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| GFCLHC-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-50/0.1] |
| GFCLHD-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| GFCLHE-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16] |
| GFCLHF-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16] |
| GFCLHG-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| GFCLHH-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-125/0.1] |
| GFCLSHAA-D[3-20/1]-L[5-200/0.1] |
| GFCLSHAB-D[6-20/1]-L[5-200/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| GFCLSHAB-D[6-20/1]-L[5-200/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| GFCLSHAC-D[3-20/1]-L[5-200/0.1]-NC[2-50/0.1] |
| GFCLSHAD-D[3-20/1]-L[5-200/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| GFCLSHAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16] |
| GFCLSHAF-D[6-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16] |
| GFCLSHAG-D[3-20/1]-L[5-200/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| GFCLSHAH-D[6-20/1]-L[5-200/0.1]-NC[2-125/0.1] |
| GFCLSHBA-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1] |
| GFCLSHBA-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10] |
| GFCLSHBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| GFCLSHBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| GFCLSHBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[0-125/0.1]-GC[0-10/0.1] |
| GFCLSHBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| GFCLSHBC-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[2-50/0.1] |
| GFCLSHBC-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[2-50/0.1] |
| GFCLSHBD-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| GFCLSHBD-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| GFCLSHBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16] |
| GFCLSHBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16] |
| GFCLSHBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16] |
| GFCLSHBF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-MC[3,4,5,6,8,10,12,16] |
| GFCLSHBG-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| GFCLSHBG-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| GFCLSHBH-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[2-125/0.1] |
| GFCLSHBH-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[2-125/0.1] |
| GFCLSHCA-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1] |
| GFCLSHCB-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| GFCLSHCB-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| GFCLSHCC-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-50/0.1] |
| GFCLSHCD-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| GFCLSHCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16] |
| GFCLSHCF-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16] |
| GFCLSHCG-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| GFCLSHCH-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-125/0.1] |
| GFCLSHDA-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5] |
| GFCLSHDB-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-GC[0-10/0.1] |
| GFCLSHDB-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| GFCLSHDC-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[2-50/0.1] |
| GFCLSHDE-D[4-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16] |
| GFCLSHDF-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-MC[3,4,5,6,8,10,12,16] |
| GFCLSHDG-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| GFCLSHDH-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[2-125/0.1] |
| GFCLSHEA-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16] |
| GFCLSHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1] |
| GFCLSHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| GFCLSHEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1] |
| GFCLSHED-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5] |
| GFCLSHEE-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Shaft Dia. D (mm) | Mounting Method | Characteristics/Applications | Basic Shape | Material | Hardness | Surface Treatment | Material Details | Material Detail | Left End Shape | Right End Shape | G (mm) | GC (mm) | H (mm) | HC (mm) | K (mm) | KC (mm) | L (mm) | M (mm) | MC (mm) | N (mm) | NC (mm) | T (mm) | TC (mm) | Y (mm) | YC (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Nut (Threaded) | Low Dust Generation | Shouldered | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | D | E | - | - | 5 ～ 30 | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Tapped | Low Dust Generation | Shouldered | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | D | F | - | - | 7 ～ 30 | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation | Shouldered | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | D | G | - | - | 4 ～ 30 | - | - | 2 ～ 30 | 5 ～ 200 | - | - | - | 0 ～ 125 | 0.5 ～ 125 | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Set Screw (V Groove) | Low Dust Generation | Shouldered | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | D | H | - | - | 7 ～ 30 | - | - | - | 5 ～ 200 | - | - | - | 2 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Nut (Threaded) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | E | A | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Nut (Threaded) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | E | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Nut (Threaded) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | E | B | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 10 | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Retaining Ring / Nut (Threaded) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | E | C | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Nut (Threaded) | Low Dust Generation | Shouldered | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | E | D | - | - | - | 5 ～ 30 | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Nut (Threaded) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | E | E | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Nut (Threaded) / Tapped | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | E | F | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | E | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | 3 ～ 16 | - | - | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Nut (Threaded) / Set Screw (V Groove) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | E | H | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Tapped | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | F | A | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Tapped | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | F | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Tapped | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | F | B | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 10 | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Retaining Ring / Tapped | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | F | C | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Tapped | Low Dust Generation | Shouldered | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | F | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Nut (Threaded) / Tapped | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | F | E | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Tapped | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | F | F | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Tapped / Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | F | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | 3 ～ 16 | - | - | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Tapped / Set Screw (V Groove) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | F | H | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | G | A | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | - | 0 ～ 10 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | G | B | - | 0 ～ 10 | - | - | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | 0 ～ 125 | - | - | 0 ～ 10 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | G | B | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | 3 ～ 10 | 0 ～ 125 | 0 ～ 125 | - | - | 0 ～ 10 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Retaining Ring / Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | G | C | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | 2 ～ 50 | - | - | 0 ～ 10 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation | Shouldered | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | G | D | - | - | - | 4 ～ 30 | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | 0.5 ～ 125 | 0 ～ 10 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | G | E | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | 3 ～ 16 | 0 ～ 125 | - | - | - | 0 ～ 10 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Tapped / Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | G | F | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | 3 ～ 16 | 0 ～ 125 | - | - | - | 0 ～ 10 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | G | G | - | - | - | - | 2 ～ 30 | 2 ～ 30 | 5 ～ 200 | - | - | 0 ～ 125 | 0 ～ 125 | - | - | 0 ～ 10 | 0 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway / Set Screw (V Groove) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | G | H | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | 2 ～ 125 | - | - | 0 ～ 10 | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Set Screw (V Groove) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | H | A | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Set Screw (V Groove) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | H | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Set Screw (V Groove) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | H | B | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 10 | 2 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Retaining Ring / Set Screw (V Groove) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | H | C | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Set Screw (V Groove) | Low Dust Generation | Shouldered | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | H | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 200 | - | - | 2 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Nut (Threaded) / Set Screw (V Groove) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | H | E | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Tapped / Set Screw (V Groove) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | H | F | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway / Set Screw (V Groove) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | H | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | - | - | 2 ～ 125 | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Set Screw (V Groove) | Low Dust Generation | Straight | Steel | Hardness Requirement | Hard Chrome Plating | S45C | S45C | H | H | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Straight | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | A | A | - | - | - | - | - | - | 5 ～ 200 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | A | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | - | - | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | A | B | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 10 | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Retaining Ring | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | A | C | - | - | - | - | - | - | 5 ～ 200 | - | - | - | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Straight | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | A | D | - | - | - | 4 ～ 30 | - | - | 5 ～ 200 | - | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Nut (Threaded) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | A | E | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Tapped | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | A | F | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | A | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | - | - | - | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Set Screw (V Groove) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | A | H | - | - | - | - | - | - | 5 ～ 200 | - | - | - | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | A | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | A | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | B | 0 ～ 10 | 0 ～ 10 | - | - | - | - | 5 ～ 200 | - | - | 0 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | B | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 10 | 0 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | B | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | 3 ～ 10 | 0 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Retaining Ring / Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | C | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | - | 0 ～ 125 | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Retaining Ring / Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | C | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | D | 0 ～ 10 | - | - | 7 ～ 30 | - | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Nut (Threaded) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | E | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 0 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Nut (Threaded) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | E | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | 3 ～ 16 | 0 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Tapped | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | F | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 0 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Tapped | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | F | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | 3 ～ 16 | 0 ～ 125 | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | G | 0 ～ 10 | - | - | - | - | 2 ～ 30 | 5 ～ 200 | - | - | 0 ～ 125 | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Set Screw (V Groove) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | H | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | - | 0 ～ 125 | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Set Screw (V Groove) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | B | H | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Retaining Ring | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | C | A | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 50 | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Retaining Ring / Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | C | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 50 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Retaining Ring / Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | C | B | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 10 | 2 ～ 50 | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Retaining Ring | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | C | C | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 50 | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Retaining Ring | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | C | D | - | - | - | 4 ～ 30 | - | - | 5 ～ 200 | - | - | 2 ～ 50 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Retaining Ring / Nut (Threaded) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | C | E | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 50 | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Retaining Ring / Tapped | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | C | F | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 50 | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Retaining Ring / Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | C | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | - | - | 2 ～ 50 | 0 ～ 125 | - | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Retaining Ring / Set Screw (V Groove) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | C | H | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 50 | 2 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Straight | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | A | - | - | 4 ～ 30 | - | - | - | 5 ～ 200 | - | - | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | B | - | 0 ～ 10 | 7 ～ 30 | - | - | - | 5 ～ 200 | - | - | - | 0 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | B | - | - | 7 ～ 30 | - | - | - | 5 ～ 200 | - | 3 ～ 10 | - | 0 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Retaining Ring | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | C | - | - | 4 ～ 30 | - | - | - | 5 ～ 200 | - | - | - | 2 ～ 50 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Nut (Threaded) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | E | - | - | 5 ～ 30 | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Tapped | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | F | - | - | 7 ～ 30 | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | G | - | - | 4 ～ 30 | - | - | 2 ～ 30 | 5 ～ 200 | - | - | - | 0 ～ 125 | 0.5 ～ 125 | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Set Screw (V Groove) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | H | - | - | 7 ～ 30 | - | - | - | 5 ～ 200 | - | - | - | 2 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Nut (Threaded) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | E | A | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Nut (Threaded) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | E | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 6 ～ 20 | Cotter Pin / Nut (Threaded) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | E | B | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 10 | - | 0 ～ 125 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Retaining Ring / Nut (Threaded) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | E | C | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 2 ～ 50 | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Nut (Threaded) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | E | D | - | - | - | 5 ～ 30 | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) or more | 10 | 4 ～ 20 | Nut (Threaded) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Straight | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | E | E | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 16 | - | - | - | - | - | - |
Loading...
Basic Information
| Environmentally friendly | RoHS Compliant (10 Substances) | Type | L Dimension Configurable |
|---|
Specification/Dimensions
-
Shaft Dia. D(mm)
-
Mounting Method
-
Straight -
Retaining Ring -
Cotter Pin -
Nut (Threaded) -
Tapped -
Set Screw (Set Screw Flat, D-Cut) -
Keyway -
Set Screw (V Groove)
-
-
Characteristics/Applications
-
Basic Shape
-
Shouldered -
Straight
-
-
Material
- Steel
- Stainless Steel
-
Hardness
- Not Spec-designed
- Hardness Requirement
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
-
Material Details
- S45C
- SUS304
- SUS440C ot 13Cr Class Stainless Steel
-
Material Detail
-
Left End Shape
- A
- B
- C
- D
- E
- F
- G
- H
-
Right End Shape
- A
- B
- C
- D
- E
- F
- G
- H
-
G(mm)
-
GC(mm)
-
H(mm)
-
HC(mm)
-
K(mm)
-
KC(mm)
-
L(mm)
-
M(mm)
-
MC(mm)
-
N(mm)
-
NC(mm)
-
T(mm)
-
TC(mm)
-
Y(mm)
-
YC(mm)
-
type
- FCLAA
- FCLAB
- FCLAC
- FCLAD
- FCLAE
- FCLAF
- FCLAG
- FCLAH
- FCLBA
- FCLBB
- FCLBC
- FCLBD
- FCLBE
- FCLBF
- FCLBG
- FCLBH
- FCLCA
- FCLCB
- FCLCC
- FCLCD
- FCLCE
- FCLCF
- FCLCG
- FCLCH
- FCLDA
- FCLDB
- FCLDC
- FCLDE
- FCLDF
- FCLDG
- FCLDH
- FCLEA
- FCLEB
- FCLEC
- FCLED
- FCLEE
- FCLEF
- FCLEG
- FCLEH
- FCLFA
- FCLFB
- FCLFC
- FCLFD
- FCLFE
- FCLFF
- FCLFG
- FCLFH
- FCLGA
- FCLGB
- FCLGC
- FCLGD
- FCLGE
- FCLGF
- FCLGG
- FCLGH
- FCLHA
- FCLHAA
- FCLHAB
- FCLHAC
- FCLHAD
- FCLHAE
- FCLHAF
- FCLHAG
- FCLHAH
- FCLHB
- FCLHBA
- FCLHBB
- FCLHBC
- FCLHBD
- FCLHBE
- FCLHBF
- FCLHBG
- FCLHBH
- FCLHC
- FCLHCA
- FCLHCB
- FCLHCC
- FCLHCD
- FCLHCE
- FCLHCF
- FCLHCG
- FCLHCH
- FCLHD
- FCLHDA
- FCLHDB
- FCLHDC
- FCLHDE
- FCLHDF
- FCLHDG
- FCLHDH
- FCLHE
- FCLHEA
- FCLHEB
- FCLHEC
- FCLHED
- FCLHEE
- FCLHEF
- FCLHEG
- FCLHEH
- FCLHF
- FCLHFA
- FCLHFB
- FCLHFC
- FCLHFD
- FCLHFE
- FCLHFF
- FCLHFG
- FCLHFH
- FCLHG
- FCLHGA
- FCLHGB
- FCLHGC
- FCLHGD
- FCLHGE
- FCLHGF
- FCLHGG
- FCLHGH
- FCLHH
- FCLHHA
- FCLHHB
- FCLHHC
- FCLHHD
- FCLHHE
- FCLHHF
- FCLHHG
- FCLHHH
- FCLSAA
- FCLSAB
- FCLSAC
- FCLSAD
- FCLSAE
- FCLSAF
- FCLSAG
- FCLSAH
- FCLSBA
- FCLSBB
- FCLSBC
- FCLSBD
- FCLSBE
- FCLSBF
- FCLSBG
- FCLSBH
- FCLSCA
- FCLSCB
- FCLSCC
- FCLSCD
- FCLSCE
- FCLSCF
- FCLSCG
- FCLSCH
- FCLSDA
- FCLSDB
- FCLSDC
- FCLSDE
- FCLSDF
- FCLSDG
- FCLSDH
- FCLSEA
- FCLSEB
- FCLSEC
- FCLSED
- FCLSEE
- FCLSEF
- FCLSEG
- FCLSEH
- FCLSFA
- FCLSFB
- FCLSFC
- FCLSFD
- FCLSFE
- FCLSFF
- FCLSFG
- FCLSFH
- FCLSGA
- FCLSGB
- FCLSGC
- FCLSGD
- FCLSGE
- FCLSGF
- FCLSGG
- FCLSGH
- FCLSHA
- FCLSHAA
- FCLSHAB
- FCLSHAC
- FCLSHAD
- FCLSHAE
- FCLSHAF
- FCLSHAG
- FCLSHAH
- FCLSHB
- FCLSHBA
- FCLSHBB
- FCLSHBC
- FCLSHBD
- FCLSHBE
- FCLSHBF
- FCLSHBG
- FCLSHBH
- FCLSHC
- FCLSHCA
- FCLSHCB
- FCLSHCC
- FCLSHCD
- FCLSHCE
- FCLSHCF
- FCLSHCG
- FCLSHCH
- FCLSHD
- FCLSHDA
- FCLSHDB
- FCLSHDC
- FCLSHDE
- FCLSHDF
- FCLSHDG
- FCLSHDH
- FCLSHE
- FCLSHEA
- FCLSHEB
- FCLSHEC
- FCLSHED
- FCLSHEE
- FCLSHEF
- FCLSHEG
- FCLSHEH
- FCLSHF
- FCLSHFA
- FCLSHFB
- FCLSHFC
- FCLSHFD
- FCLSHFE
- FCLSHFF
- FCLSHFG
- FCLSHFH
- FCLSHG
- FCLSHGA
- FCLSHGB
- FCLSHGC
- FCLSHGD
- FCLSHGE
- FCLSHGF
- FCLSHGG
- FCLSHGH
- FCLSHH
- FCLSHHA
- FCLSHHB
- FCLSHHC
- FCLSHHD
- FCLSHHE
- FCLSHHF
- FCLSHHG
- FCLSHHH
- GFCLAA
- GFCLAB
- GFCLAC
- GFCLAD
- GFCLAE
- GFCLAF
- GFCLAG
- GFCLAH
- GFCLBA
- GFCLBB
- GFCLBC
- GFCLBD
- GFCLBE
- GFCLBF
- GFCLBG
- GFCLBH
- GFCLCA
- GFCLCB
- GFCLCC
- GFCLCD
- GFCLCE
- GFCLCF
- GFCLCG
- GFCLCH
- GFCLDA
- GFCLDB
- GFCLDC
- GFCLDE
- GFCLDF
- GFCLDG
- GFCLDH
- GFCLEA
- GFCLEB
- GFCLEC
- GFCLED
- GFCLEE
- GFCLEF
- GFCLEG
- GFCLEH
- GFCLFA
- GFCLFB
- GFCLFC
- GFCLFD
- GFCLFE
- GFCLFF
- GFCLFG
- GFCLFH
- GFCLGA
- GFCLGB
- GFCLGC
- GFCLGD
- GFCLGE
- GFCLGF
- GFCLGG
- GFCLGH
- GFCLHA
- GFCLHB
- GFCLHC
- GFCLHD
- GFCLHE
- GFCLHF
- GFCLHG
- GFCLHH
- GFCLSHAA
- GFCLSHAB
- GFCLSHAC
- GFCLSHAD
- GFCLSHAE
- GFCLSHAF
- GFCLSHAG
- GFCLSHAH
- GFCLSHBA
- GFCLSHBB
- GFCLSHBC
- GFCLSHBD
- GFCLSHBE
- GFCLSHBF
- GFCLSHBG
- GFCLSHBH
- GFCLSHCA
- GFCLSHCB
- GFCLSHCC
- GFCLSHCD
- GFCLSHCE
- GFCLSHCF
- GFCLSHCG
- GFCLSHCH
- GFCLSHDA
- GFCLSHDB
- GFCLSHDC
- GFCLSHDE
- GFCLSHDF
- GFCLSHDG
- GFCLSHDH
- GFCLSHEA
- GFCLSHEB
- GFCLSHEC
- GFCLSHED
- GFCLSHEE
- GFCLSHEF
- GFCLSHEG
- GFCLSHEH
- GFCLSHFA
- GFCLSHFB
- GFCLSHFC
- GFCLSHFD
- GFCLSHFE
- GFCLSHFF
- GFCLSHFG
- GFCLSHFH
- GFCLSHGA
- GFCLSHGB
- GFCLSHGC
- GFCLSHGD
- GFCLSHGE
- GFCLSHGF
- GFCLSHGG
- GFCLSHGH
- GFCLSHHA
- GFCLSHHB
- GFCLSHHC
- GFCLSHHD
- GFCLSHHE
- GFCLSHHF
- GFCLSHHG
- GFCLSHHH
- PFCLAA
- PFCLAB
- PFCLAC
- PFCLAD
- PFCLAE
- PFCLAF
- PFCLAG
- PFCLAH
- PFCLBA
- PFCLBB
- PFCLBC
- PFCLBD
- PFCLBE
- PFCLBF
- PFCLBG
- PFCLBH
- PFCLCA
- PFCLCB
- PFCLCC
- PFCLCD
- PFCLCE
- PFCLCF
- PFCLCG
- PFCLCH
- PFCLDA
- PFCLDB
- PFCLDC
- PFCLDE
- PFCLDF
- PFCLDG
- PFCLDH
- PFCLEA
- PFCLEB
- PFCLEC
- PFCLED
- PFCLEE
- PFCLEF
- PFCLEG
- PFCLEH
- PFCLFA
- PFCLFB
- PFCLFC
- PFCLFD
- PFCLFE
- PFCLFF
- PFCLFG
- PFCLFH
- PFCLGA
- PFCLGB
- PFCLGC
- PFCLGD
- PFCLGE
- PFCLGF
- PFCLGG
- PFCLGH
- PFCLHA
- PFCLHAA
- PFCLHAB
- PFCLHAC
- PFCLHAD
- PFCLHAE
- PFCLHAF
- PFCLHAG
- PFCLHAH
- PFCLHB
- PFCLHBA
- PFCLHBB
- PFCLHBC
- PFCLHBD
- PFCLHBE
- PFCLHBF
- PFCLHBG
- PFCLHBH
- PFCLHC
- PFCLHCA
- PFCLHCB
- PFCLHCC
- PFCLHCD
- PFCLHCE
- PFCLHCF
- PFCLHCG
- PFCLHCH
- PFCLHD
- PFCLHDA
- PFCLHDB
- PFCLHDC
- PFCLHDE
- PFCLHDF
- PFCLHDG
- PFCLHDH
- PFCLHE
- PFCLHEA
- PFCLHEB
- PFCLHEC
- PFCLHED
- PFCLHEE
- PFCLHEF
- PFCLHEG
- PFCLHEH
- PFCLHF
- PFCLHFA
- PFCLHFB
- PFCLHFC
- PFCLHFD
- PFCLHFE
- PFCLHFF
- PFCLHFG
- PFCLHFH
- PFCLHG
- PFCLHGA
- PFCLHGB
- PFCLHGC
- PFCLHGD
- PFCLHGE
- PFCLHGF
- PFCLHGG
- PFCLHGH
- PFCLHH
- PFCLHHA
- PFCLHHB
- PFCLHHC
- PFCLHHD
- PFCLHHE
- PFCLHHF
- PFCLHHG
- PFCLHHH
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Pivot Pins - Cotter Pins
- Pivot Pins - Tapped, Hex Socket Head with Shoulder
- Pivot Pins - Set Screw Flat
- Pivot Pins - D-Cut
- Precision Pivot Pins - Retaining Rings
- Pivot Pins Shouldered With Retaining Ring Groove
- [Clean & Pack] Pivot Pin - Straight, Cotter Pin
- [Clean & Pack] Pivot Pin - Straight, Retaining Ring
Complementary Products
-
Bearings with Housings - Direct Mount, Compact
MISUMI Standard Price : MYR 52.12- Days to Ship : 2 Day(s) or more
-
Urethane Rollers - with Collars - Set Screw Hole
MISUMI Standard Price : MYR 44.51- Days to Ship : 2 Day(s) or more
Customers Who Viewed This Item Also Viewed
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy