Our website upgrade are completed! Latest improvements are now LIVE to enhance your ordering experience. You may be logged out due to the update. Please take note to login again or reset credentials if needed. More details here.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Jector Punches for Heavy Load with Dowel Holes TiCN Coating, Spring & Pin Reinforced type (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

A punch with a dowel hole on the punch shaft that allows for direct positioning of the punch. Convenient when using a punch retainer.
- Recommended when you are concerned about damage to the brim of the punch, such as when punching high tensile strength materials.
・Size expanded from D32 to D45!

[What is TiCN coating]
TiCN is a coating widely used in press molds. Improved punch life can be expected by increasing the wear resistance of the cutting edge.

FLANGE
SKH51
TiCN

Part Number

Configured Part Number is shown.

Drawing
3D Preview
Part Numbers
Catalog

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
H-AHJVRL-C10-[60-100/10]-P[5-9.97/0.01]-W[5-9.97/0.01]-R[0.15-4.98/0.01]
H-AHJVRL-C10-LC[53-99.9/0.1]-P[5-9.97/0.01]-W[5-9.97/0.01]-R[0.15-4.98/0.01]
H-AHJVRL-C13-[60-100/10]-P[6-12.97/0.01]-W[6-12.97/0.01]-R[0.15-6.48/0.01]
H-AHJVRL-C13-LC[53-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01]-R[0.15-6.48/0.01]
H-AHJVRL-C16-[70-100/10]-P[6-15.97/0.01]-W[6-15.97/0.01]-R[0.15-7.98/0.01]
H-AHJVRL-C16-LC[53-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01]-R[0.15-7.98/0.01]
H-AHJVRL-C20-[70-100/10]-P[6-19.97/0.01]-W[6-19.97/0.01]-R[0.15-9.98/0.01]
H-AHJVRL-C20-LC[53-99.9/0.1]-P[6-19.97/0.01]-W[6-19.97/0.01]-R[0.15-9.98/0.01]
H-AHJVRL-C25-[70-100/10]-P[6-24.97/0.01]-W[6-24.97/0.01]-R[0.15-12.48/0.01]
H-AHJVRL-C25-LC[53-99.9/0.1]-P[6-24.97/0.01]-W[6-24.97/0.01]-R[0.15-12.48/0.01]
H-AHJVRS-C10-[60-100/10]-P[5-9.97/0.01]-W[5-9.97/0.01]-R[0.15-4.98/0.01]
H-AHJVRS-C10-LC[54-99.9/0.1]-P[5-9.97/0.01]-W[5-9.97/0.01]-R[0.15-4.98/0.01]
H-AHJVRS-C13-[60-100/10]-P[6-12.97/0.01]-W[6-12.97/0.01]-R[0.15-6.48/0.01]
H-AHJVRS-C13-LC[54-99.9/0.1]-P[6-12.97/0.01]-W[6-12.97/0.01]-R[0.15-6.48/0.01]
H-AHJVRS-C16-[60-100/10]-P[6-15.97/0.01]-W[6-15.97/0.01]-R[0.15-7.98/0.01]
H-AHJVRS-C16-LC[54-99.9/0.1]-P[6-15.97/0.01]-W[6-15.97/0.01]-R[0.15-7.98/0.01]
H-AHJVRS-C20-[60-100/10]-P[6-19.97/0.01]-W[6-19.97/0.01]-R[0.15-9.98/0.01]
H-AHJVRS-C20-LC[54-99.9/0.1]-P[6-19.97/0.01]-W[6-19.97/0.01]-R[0.15-9.98/0.01]
H-AHJVRS-C25-[60-100/10]-P[6-24.97/0.01]-W[6-24.97/0.01]-R[0.15-12.48/0.01]
H-AHJVRS-C25-LC[54-99.9/0.1]-P[6-24.97/0.01]-W[6-24.97/0.01]-R[0.15-12.48/0.01]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Jector	Tip shape	B (Tip length)	D (Shank diameter) (mm)	P (Tip dimension) (mm)	L (L dimension) (mm)	LC (Full length alteration) (mm)	R (Tip corner R) (mm)	W (Tip dimension) (mm)
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	L	10	5 ～ 9.97	60 ～ 100	-	0.15 ～ 4.98	5 ～ 9.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	L	10	5 ～ 9.97	-	53 ～ 99.9	0.15 ～ 4.98	5 ～ 9.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	L	13	6 ～ 12.97	60 ～ 100	-	0.15 ～ 6.48	6 ～ 12.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	L	13	6 ～ 12.97	-	53 ～ 99.9	0.15 ～ 6.48	6 ～ 12.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	L	16	6 ～ 15.97	70 ～ 100	-	0.15 ～ 7.98	6 ～ 15.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	L	16	6 ～ 15.97	-	53 ～ 99.9	0.15 ～ 7.98	6 ～ 15.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	L	20	6 ～ 19.97	70 ～ 100	-	0.15 ～ 9.98	6 ～ 19.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	L	20	6 ～ 19.97	-	53 ～ 99.9	0.15 ～ 9.98	6 ～ 19.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	L	25	6 ～ 24.97	70 ～ 100	-	0.15 ～ 12.48	6 ～ 24.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	L	25	6 ～ 24.97	-	53 ～ 99.9	0.15 ～ 12.48	6 ～ 24.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	S	10	5 ～ 9.97	60 ～ 100	-	0.15 ～ 4.98	5 ～ 9.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	S	10	5 ～ 9.97	-	54 ～ 99.9	0.15 ～ 4.98	5 ～ 9.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	S	13	6 ～ 12.97	60 ～ 100	-	0.15 ～ 6.48	6 ～ 12.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	S	13	6 ～ 12.97	-	54 ～ 99.9	0.15 ～ 6.48	6 ～ 12.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	S	16	6 ～ 15.97	60 ～ 100	-	0.15 ～ 7.98	6 ～ 15.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	S	16	6 ～ 15.97	-	54 ～ 99.9	0.15 ～ 7.98	6 ～ 15.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	S	20	6 ～ 19.97	60 ～ 100	-	0.15 ～ 9.98	6 ～ 19.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	S	20	6 ～ 19.97	-	54 ～ 99.9	0.15 ～ 9.98	6 ～ 19.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	S	25	6 ～ 24.97	60 ～ 100	-	0.15 ～ 12.48	6 ～ 24.97
-	1 Piece(s)	7 Day(s)	10	Spring and pin reinforced type	R	S	25	6 ～ 24.97	-	54 ～ 99.9	0.15 ～ 12.48	6 ～ 24.97

Product TOP

Basic Information

Heavy-load punches	Yes	Shank type	Single-stepped	Material	SKH51 Equivalent
Surface treatment	TiCN	Shank (mounting part) shape	With locating dowel hole	Shank diameter D tolerance	m5
T (Head thickness/plate thickness)(mm)	8

Configure

200 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Jector
- Standard type
- Spring and pin reinforced type
Clear
Tip shape
- A
- D
- R
- E
- G
Clear
B (Tip length)
- L
- S
Clear
D (Shank diameter)(mm)
- 10
- 13
- 16
- 20
- 25
Clear
P (Tip dimension)(mm)
[5-24.99/0.01mm Unit(s)]
Clear
L (L dimension)(mm)
[60-130/10mm Unit(s)]
Clear
LC (Full length alteration)(mm)
[53-129.9/0.1mm Unit(s)]
Clear
R (Tip corner R)(mm)
[0.15-12.48/0.01mm Unit(s)]
Clear
W (Tip dimension)(mm)
[5-24.97/0.01mm Unit(s)]
Clear
type
- H-AHJAL-C
- H-AHJAS-C
- H-AHJDL-C
- H-AHJDS-C
- H-AHJEL-C
- H-AHJES-C
- H-AHJGL-C
- H-AHJGS-C
- H-AHJRL-C
- H-AHJRS-C
- H-AHJVAL-C
- H-AHJVAS-C
- H-AHJVDL-C
- H-AHJVDS-C
- H-AHJVEL-C
- H-AHJVES-C
- H-AHJVGL-C
- H-AHJVGS-C
- H-AHJVRL-C
- H-AHJVRS-C
Clear
CAD
- 2D
- 3D
Clear